UCC28720
- < 10-mW No-Load Power
- Primary-Side Regulation (PSR) Eliminates Opto-
Coupler - ±5% Voltage and Current Regulation Across Line
and Load - 700-V Start-Up Switch
- 80-kHz Maximum Switching Frequency Enables
High-Power Density Charger Designs - Quasi-Resonant Valley-Switching Operation for
Highest Overall Efficiency - Wide VDD Range Allows Small Bias Capacitor
- Dynamic BJT Drive
- Overvoltage, Low-Line, and Overcurrent
Protection Functions - Programmable Cable Compensation
- SOIC-7 Package
The UCC28720 flyback power supply controller provides isolated-output Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current.
An internal 700-V start-up switch, dynamically-controlled operating states and a tailored modulation profile support ultra-low standby power without sacrificing start-up time or output transient response.
Control algorithms in the UCC28720 allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a bipolar transistor power switch. Discontinuous conduction mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.
The controller has a maximum switching frequency of 80 kHz and always maintains control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28720 allows compensation for voltage drop in the cable to be programmed with an external resistor.
技術資料
| 上位の文書 | タイプ | タイトル | フォーマットオプション | 最新の英語版をダウンロード | 日付 | |
|---|---|---|---|---|---|---|
| * | データシート | UCC28720 Constant-Voltage, Constant-Current Controller With Primary-Side Regulation データシート (Rev. B) | PDF | HTML | 2015/09/30 | ||
| アプリケーション・ノート | Flyback Aux Winding OVP and UVLO Fault Sensing Design and Troubleshooting Tips | PDF | HTML | 2021/08/31 | |||
| アプリケーション・ノート | Minimize Standby Consumption for UCC287XX Family | 2019/08/01 | ||||
| アプリケーション・ノート | Maximum Output Power and Thermal Considerations for UCC28720 and UCC28722 | 2017/12/06 | ||||
| アプリケーション・ノート | Troubleshooting TI PSR controllers | 2016/10/03 | ||||
| 技術記事 | Slim down your flyback; lose that excess snubber | PDF | HTML | 2016/02/15 | |||
| ホワイト・ペーパー | Control Challenges for Low Power AC/DC Converters | 2015/10/02 | ||||
| ホワイト・ペーパー | Control Challenges for Low Power AC/DC Converters (PPT) | 2015/10/02 | ||||
| 技術記事 | Designing multiple output converters with primary side sensing | PDF | HTML | 2015/08/04 | |||
| アプリケーション・ノート | 5-W USB Flyback Design Example Using the UCC28722 | 2014/01/08 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
UCC28720EVM-212 — UCC28720EVM-212 5W 評価基板、USB オフライン アダプタ用
SLUC528 — UCC28722 MathCad Design Tool
SLUC529 — UCC28722 Excel Design Tool
PMP9622 — 350W 定電圧 - 定電流 (CVCC) 位相シフト フル ブリッジ、リファレンス デザイン
このリファレンス デザインでは UCC3895 位相シフト フルブリッジ コントローラを使用して、120VAC の入力から、44Vdc、最大 8A の出力への高効率変換を実装します。 この電源は定電圧、定電流動作になるように設定されています。 電圧と電流は固定抵抗の値によって設定されていますが、実際の製品ではマイクロ プロセッサによって設定することも可能です。 この設計では、UCC28720 PWM コントローラを用いた低コストの BJT フライバック回路によってバイアス電源が生成されています。
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| SOIC (D) | 7 | Ultra Librarian |
購入と品質
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。