ADS1278
- Simultaneously Measure Four/Eight Channels
- Up to 144kSPS Data Rate
- AC Performance:
70kHz Bandwidth
111dB SNR (High-Resolution Mode)
–108dB THD - DC Accuracy:
0.8µV/°C Offset Drift
1.3ppm/°C Gain Drift - Selectable Operating Modes:
High-Speed: 144kSPS, 106dB SNR
High-Resolution: 52kSPS, 111dB SNR
Low-Power: 52kSPS, 31mW/ch
Low-Speed: 10kSPS, 7mW/ch - Linear Phase Digital Filter
- SPI™ or Frame-Sync Serial Interface
- Low Sampling Aperture Error
- Modulator Output Option (digital filter bypass)
- Analog Supply: 5V
- Digital Core: 1.8V
- I/O Supply: 1.8V to 3.3V
- Vibration/Modal Analysis
- Multi-Channel Data Acquisition
- Acoustics/Dynamic Strain Gauges
- Pressure Sensors
PowerPAD is a trademark of Texas Instruments, Inc.
SPI is a trademark of Motorola, Inc.
All other trademarks are the property of their respective owners.
Based on the single-channel ADS1271, the ADS1274 (quad) and ADS1278 (octal) are 24-bit, delta-sigma (ΔΣ) analog-to-digital converters (ADCs) with data rates up to 144k samples per second (SPS), allowing simultaneous sampling of four or eight channels. The devices are offered in identical packages, permitting drop-in expandability.
Traditionally, industrial delta-sigma ADCs offering good drift performance use digital filters with large passband droop. As a result, they have limited signal bandwidth and are mostly suited for dc measurements. High-resolution ADCs in audio applications offer larger usable bandwidths, but the offset and drift specifications are significantly weaker than respective industrial counterparts. The ADS1274 and ADS1278 combine these types of converters, allowing high-precision industrial measurement with excellent dc and ac specifications.
The high-order, chopper-stabilized modulator achieves very low drift with low in-band noise. The onboard decimation filter suppresses modulator and signal out-of-band noise. These ADCs provide a usable signal bandwidth up to 90% of the Nyquist rate with less than 0.005dB of ripple.
Four operating modes allow for optimization of speed, resolution, and power. All operations are controlled directly by pins; there are no registers to program. The devices are fully specified over the extended industrial range (–40°C to +105°C) and are available in an HTQFP-64 PowerPAD™ package.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | Quad/Octal, Simultaneous Sampling, 24-Bit Analog-to-Digital Converters datasheet (Rev. F) | 2011. 2. 17 | ||
| Application brief | ADS1278QML-SP Power-On Reset Procedure (Rev. A) | PDF | HTML | 2026. 7. 10 | ||
| 애플리케이션 노트 | Digital Filter Types in Delta-Sigma ADCs (Rev. A) | PDF | HTML | 2023. 3. 29 | ||
| e북 | Fundamentals of Precision ADC Noise Analysis (Rev. A) | 2020. 6. 19 | |||
| 백서 | Voltage-reference impact on total harmonic distortion | 2016. 8. 1 | |||
| e북 | Best of Baker's Best: Precision Data Converters -- Delta-Sigma ADCs | 2015. 3. 19 | |||
| 아날로그 디자인 학술지 | Using single-supply fully diff. amps with neg. input voltages to drive ADCs | 2010. 11. 15 | |||
| 애플리케이션 노트 | Analog Front-End Design for ECG Systems Using Delta-Sigma ADCs (Rev. A) | 2010. 4. 13 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ADS1278EVM-PDK — ADS1278 평가 모듈
ADS1X7X-EXCEL-CALC-TOOL — ADS1x7x Design Calculator
- ADS1x7x Excel 계산기 툴은 ADS1x7x 장치의 구성을 간소화하는 몇 가지 편리한 툴을 제공합니다. 이 툴을 사용하면 사용자가 ADS1x7x 광대역 아날로그-디지털 컨버터(ADC)로 설계를 최적화하는 데 도움이 되는 다양한 설정 및 작동 모드를 이해할 수 있습니다. 이 툴에는 ADC 변환 계산기, 디지털 필터 응답 계산기, 데이지 체인 구성 탭 및 SNR 예측기가 포함되어 있습니다. ADS1x7x 계산기는 공통 프로그래밍 및 장치 설정 장애물을 제거하여 시장 출시 시간을 단축합니다.
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
TIDA-00002 — 고온 애플리케이션용 혹독한 환경 수집 단말기(HEAT) EVM 플랫폼
HEATEVM은 신호 조절 및 프로세서 평가를 위한 고온 플랫폼을 제공하는 MCM입니다. 이 모듈은 최대 200°C의 매우 높은 작동 온도를 견디도록 설계된 완전한 부품 체인으로 구성되어 있습니다. PCB는 이러한 극한 온도에 적합한 폴리머 소재로 제작됩니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTQFP (PAP) | 64 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.