AFE5803
- 8-Channel Complete Analog Front-End
- LNA, VCAT, PGA, LPF, ADC
- Programmable Gain Low-Noise Amplifier (LNA)
- 24/18/12 dB Gain
- 0.25/0.5/1 VPP Linear Input Range
- 0.63/0.7/0.9 nV/rtHz Input Referred Noise
- Programmable Active Termination
- 40 dB Low Noise Voltage Controlled Attenuator (VCAT)
- 24/30 dB Programmable Gain Amplifier (PGA)
- 3rd Order Linear Phase Low-Pass Filter (LPF)
- 10, 15, 20, 30 MHz
- 14-bit Analog to Digital Converter (ADC)
- 77 dBFS SNR at 65 MSPS
- LVDS Outputs
- Noise/Power Optimizations (Full Chain)
- 158 mW/CH at 0.75 nV/rtHz, 65 MSPS
- 101 mW/CH at 1.1 nV/rtHz, 40 MSPS
- Excellent Device-to-Device Gain Matching
- ±0.5 dB (Typical) and ±0.9 dB (Max)
- Low Harmonic Distortion
- Fast and Consistent Overload Recovery
- Small Package: 15 mm x 9 mm, 135-BGA
The AFE5803 is a highly integrated Analog Front-End (AFE) solution specifically designed for ultrasound systems in which high performance and small size are required. The AFE5803 integrates a complete time-gain-control (TGC) imaging path. It also enables users to select one of various power/noise combinations to optimize system performance. Therefore, the AFE5803 is a suitable ultrasound analog front end solution for portable systems.
The AFE5803 contains eight channels of voltage controlled amplifier (VCA), 14/12-bit Analog-to-Digital Converter (ADC). The VCA includes Low noise Amplifier (LNA), Voltage controlled Attenuator (VCAT), Programmable Gain Amplifier (PGA), and Low-Pass Filter (LPF). The LNA gain is programmable to support 250 mVPP to 1 VPP input signals. Programmable active termination is also supported by the LNA. The ultra-low noise VCAT provides an attenuation control range of 40 dB and improves overall low gain SNR which benefits harmonic imaging and near field imaging. The PGA provides gain options of 24 dB and 30 dB. Before the ADC, a LPF can be configured as 10 MHz, 15 MHz, 20 MHz or 30 MHz to support ultrasound applications with different frequencies. The high-performance 14bit/65 MSPS ADC in the AFE5803 achieves 77dBFS SNR. It ensures excellent SNR at low chain gain. The ADC’s LVDS outputs enable flexible system integration desired for miniaturized systems.
The AFE5803 is available in a 15mm × 9mm, 135-pin BGA package and it is specified for operation from 0°C to 85°C. It is also pin-to-pin compatible to the AFE5807, AFE5808 and AFE5808A.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | Fully Integrated, 8-Channel Ultrasound Analog Front End datasheet (Rev. A) | 2012. 1. 18 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
AFE5808AEVM — AFE5808A 평가 모듈
AFE5808AEVM은 AFE5808A를 평가할 수 있는 편리한 플랫폼을 제공합니다. AFE5808A는 AFE5808의 향상된 버전이며 새 설계에 권장됩니다. AFE5808에 비해, 디지털 고역 필터의 차단 주파수 범위를 확장하고, 높은 임피던스 소스가 나타날 때 그에 따른 잡음을 줄이고, 극심한 과부하 신호의 처리 기능이 증가합니다.
AFE5808A는 스펙트럼 도플러 초음파 장비용 연속파(CW) 도플러 믹서를 갖춘 8채널 완전 통합 AFE(아날로그 프론트 엔드)입니다. EVM 키트에는 사용 설명서, 소프트웨어, USB 케이블이 (...)
DATACONVERTERPRO-SW — 고속 데이터 컨버터 프로 GUI 설치 프로그램, v5.31
이 고속 데이터 컨버터 프로 GUI는 대부분의 TI 고속 데이터 컨버터 [ADC(아날로그-디지털 컨버터) 및 DAC(디지털-아날로그 컨버터)] 및 AFE(아날로그 프론트 엔드) 플랫폼을 평가할 수 있도록 설계된 PC(Windows® XP/7/10 호환) 프로그램입니다. 전체 TSW14xxx 시리즈의 데이터 캡처 및 패턴 생성 카드를 지원하도록 설계된 DATACONVERTERPRO-SW는 시간 및 주파수 영역 모두에서 데이터 컨버터를 분석할 수 있는 강력하고 빠른 솔루션과 단일 톤, 멀티톤 및 변조 신호 지원을 제공합니다. 또한 이 (...)
SLOC260 — AFE5803EVM GUI Installer
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| NFBGA (ZCF) | 135 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.