BQ25350
-
High-efficiency 3A synchronous buck-boost charger for single cell battery
- Seamless automatic transition between Buck, Buck-Boost, and Boost operation
- Charge current up to 3A in 20mA steps
- Charge termination from 20 to 1000mA in 5mA steps
- Flexible JEITA profile for safe charging over temperature and high configurability
- Selectable switching frequency between 1MHz and 2MHz
- >95% peak efficiency
- 95.9% efficiency when VBUS = 4.2V, VBAT = 3.6V, ICHG = 1A
- 94.8% efficiency when VBUS = 4.2V, VBAT = 3.6V, ICHG = 2A
- NVDC power path management with high
efficiency 15mΩ BATFET
- System instant-on with depleted or no battery
- Battery supplement when adapter is fully loaded
- 2.5V to 5.5V input voltage range
- Programmable VINDPM
- 2.48 to 5V in 40mV steps
- BATFET control to support shutdown mode, standby mode, and full system reset
- Ultra low IQ
- 2.5µA in battery-only mode
- 0.16µA in shutdown mode
- 0.6µA in standby mode
- High accuracy voltage/current
regulation
- ±0.4% charge voltage regulation
- ±5% charge current regulation
- Safety
- Thermal regulation and thermal shutdown
- Input, system, battery overvoltage protection
- Battery, converter overcurrent protection
- Charging safety timer
BQ25350 is a highly-integrated 3A switch-mode battery charge management and system power-path management device for single cell Li-Ion and Li-polymer batteries. It provides high efficiency charging with a small solution size and low component count. BQ25350 operates over a 2.5V to 5.5V input range with seamless transition between Buck, Buck-Boost, and Boost modes. It uses NVDC power path management, regulating the system slightly above the battery voltage without dropping below a configurable minimum system voltage. The low impedance power path optimizes switch-mode operation efficiency, reduces battery charging time and extends battery life during discharging phase. BQ25350 provides critical charging safety protections including battery temperature monitoring, charging safety timers, over-voltage and over-current protections. Charging and safety settings are highly configurable via the I2C serial bus, making BQ25350 a truly flexible solution.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | BQ25350 I2 C Controlled, 3A, Single Cell Integrated Buck-Boost Charger with NVDC Power Path Management datasheet (Rev. A) | PDF | HTML | 2026. 10. 9 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BQ25350EVM — BQ25350 evaluation module
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DSBGA (YBG) | 16 | Ultra Librarian |