BQ27532-G1
- Battery Fuel Gauge and Charger Controller for 1-
Cell Li-Ion Applications up to 14,500-mAh
Capacity - Resides on System Main Board
- Battery Fuel Gauge Based on Patented
Impedance Track™ Technology- Models the Battery Discharge Curve for
Accurate Remaining Capacity Predictions - Automatically Adjusts for Battery Aging,
Battery Self-Discharge, and Temperature and
Rate Inefficiencies - Low-value Sense Resistor (5 to 20 mΩ)
- Models the Battery Discharge Curve for
- Battery Charger Controller With Customizable
Charge Profiles- Configurable Charge Voltage and Current
Based on Temperature - Optional State-of-Health (SoH) and Multi-Level
Based Charge Profiles
- Configurable Charge Voltage and Current
- Host-free Autonomous Battery Management
System- Reduced Software Overhead Allows for Easy
Portability Across Platforms and Shorter OEM
Design Cycles - Higher Safety and Security
- Reduced Software Overhead Allows for Easy
- Runtime Improvements
- Longer Battery Runtime Leveraging
Impedance Track™ Technology - Tighter Accuracy Controls for Charger
Termination - Improved Recharge Thresholds
- Longer Battery Runtime Leveraging
- Intelligent Charging – Customized and Adaptive
Charging Profiles- Charger Control Based on SoH
- Temperature Level Charging (TLC)
- Stand-alone Battery Charger Controller for
bq2425x Single-Cell Switch-mode Battery Charger - 400-kHz I2C Interface for Connection to System
Microcontroller Port
The bq27532-G1 system-side, Li-Ion battery management unit is a microcontroller peripheral that provides Impedance Track™ fuel gauging and charging control for single-cell Li-Ion battery packs. The fuel gauge requires little system microcontroller firmware development. Together with bq2425x single-cell switch-mode charger, the fuel gauge manages an embedded battery (non-removable) or a removable battery pack.
The fuel gauge uses the patented Impedance Track algorithm for fuel gauging, and provides information, such as remaining battery capacity (mAh), state-of-charge (%), runtime-to-empty (minimum), battery voltage (mV), temperature (°C), and SoH (%).
Battery fuel gauging with the device requires only PACK+ (P+), PACK– (P–), and thermistor (T) connections to a removable battery pack or embedded battery circuit. The 15-pin NanoFree™ (CSP) package has dimensions of 2.61 mm × 1.96 mm with 0.5-mm lead pitch. It is ideal for space-constrained applications.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | bq27532-G1 Battery Management Unit Impedance Track Fuel Gauge for bq2425x Charger datasheet (Rev. B) | PDF | HTML | 2016. 1. 21 | |
| 추가 자료 | bq27532EVM with bq27532 Battery Management Unit and bq24250 Battery Charger | 2014. 7. 21 | |||
| 사용 설명서 | bq27532-G1 Technical Reference Manual | 2014. 4. 3 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BQ27532EVM-656 — 배터리 충전 솔루션 평가 모듈
The bq27532 evaluation module (EVM) has a bq27532-G1 gas gauge that directly communicates with bq24250 single-cell, Li-Ion battery charger via !2C. This complete battery charging solution does not require a micro-controller or processor to facilitate communication between the charger and (...)
EV2400 — 배터리 연료(가스) 게이지용 USB 기반 PC 인터페이스 평가 모듈
The EV2400 EVM interface board enables an IBM-compatible or other type PC (with the required driver for its particular platform) to communicate with the Texas Instruments SMBus or I2C interface gas gauges via a Universal Serial Bus (USB) port. In addition to this board, PC software is required to (...)
BQSTUDIO-STABLE — Battery Management Studio (bqStudio) Software – stable version downloads for bq series of TI battery fuel gauges
bqStudio(Battery Management Studio)는 TI 배터리 관리 제품의 평가, 설계, 구성, 테스트 또는 기타 활용 프로세스를 지원하는 견고한 종합 툴을 제공합니다. 여기에는 실시간 감시, 그래프 및 로깅 지원, 명령 전송을 위한 간편한 인터페이스, 직접 저수준 통신 및 I/O, 구성, 보정, 학습 주기 수행, 장치를 생산 단계로 가져가기 위한 유용한 파일 생성 등 레지스터 및 데이터 메모리에 대한 전체 액세스를 제공하는 기능은 물론, 자동화된 가이드 지원도 포함됩니다.
bq20xxx 및 bq30xxx와 같은 (...)
BQSTUDIO-TEST — Battery Management Studio (bqStudio) Software – untested version downloads
bqStudio(Battery Management Studio)는 TI 배터리 관리 제품의 평가, 설계, 구성, 테스트 또는 기타 활용 프로세스를 지원하는 견고한 종합 툴을 제공합니다. 여기에는 실시간 감시, 그래프 및 로깅 지원, 명령 전송을 위한 간편한 인터페이스, 직접 저수준 통신 및 I/O, 구성, 보정, 학습 주기 수행, 장치를 생산 단계로 가져가기 위한 유용한 파일 생성 등 레지스터 및 데이터 메모리에 대한 전체 액세스를 제공하는 기능은 물론, 자동화된 가이드 지원도 포함됩니다.
bq20xxx 및 bq30xxx와 같은 (...)
GPCCHEM — 게이징 매개 변수 계산기: Impedance Track 게이지의 화학 성분 일치
실온 또는 저온 성능을 최적화하기 전에 IT(Impedance Track) 알고리즘 가스 게이지에 대한 GPC 화학 ID 일치(가장 가까운 화학 일치 찾기)를 수행해야 합니다.
게이징 매개 변수 계산기 임피던스 트랙 가스 게이지에 대한 화학 ID 일치(GPCCHEM)는 배터리 설계자가 특정 배터리 프로파일에 대해 일치하는 화학 ID를 얻는 데 도움이 되는 수학 계산 및 시뮬레이션 툴입니다. 화학 ID는 텍사스 인스트루먼트에서 정의하며 bqStudio(Battery Management Studio)를 사용하여 프로그래밍할 수 (...)
GPCRA0 — 게이징 매개 변수 계산기: Impedance Track 게이지를 위한 실내 온도 성능 최적화
Gauging Parameter Calculator – Optimize room temperature performance for Impedance track gas gauges (GPCRA0) / Golden GG Maker is a math calculation tool that helps the battery designer to refine the Impedance Track battery gauge parameters for a given battery profile. It provides optimized (...)
GPCRB — 게이징 매개 변수 계산기: 실내 및 온도 성능이 낮은 Impedance Track g 게이지 최적화
Gauging Parameter Calculator – Optimize room and low temperature performance for Impedance track gas gauges (GPCRB) is a math calculation tool that helps the battery designer to refine the Impedance Track battery gauge parameters for a given battery profile. Depending on the input log file, (...)
SLUC606 — Host System Calibration Method Software
BQ-BMS-PROGRAMMER-SW — Command line programmers for BQ products
BQ-BATTERY-PROGRAMMER-SW 소프트웨어 개발 키트(SDK)는 TI 배터리 관리 제품을 사용하는 팩의 프로그래밍, 테스트 또는 조립 프로세스를 지원하는 강력한 소프트웨어 명령줄 툴 모음입니다. 이 소프트웨어의 실행 파일은 EV2300 통신 트랜스시버용 MKST-3P-ALT-EV2300 MKS 기술 대안과 함께 작동합니다. 실행 파일은 단일 스테이션에서 작동하지만 MKS Technology Inc.의 추가 소프트웨어 및 GUI를 사용하여 여러 스테이션으로 확장할 수 있습니다. 이 소프트웨어에는 여러 스테이션에 대한 (...)
BQEVSW-MKST-UPDATE — Software Update to enable BQEVSW to use MKST-3P-ALT-EV2300
BQ-BATTERY-PROGRAMMER-SW 소프트웨어 개발 키트(SDK)는 TI 배터리 관리 제품을 사용하는 팩의 프로그래밍, 테스트 또는 조립 프로세스를 지원하는 강력한 소프트웨어 명령줄 툴 모음입니다. 이 소프트웨어의 실행 파일은 EV2300 통신 트랜스시버용 MKST-3P-ALT-EV2300 MKS 기술 대안과 함께 작동합니다. 실행 파일은 단일 스테이션에서 작동하지만 MKS Technology Inc.의 추가 소프트웨어 및 GUI를 사용하여 여러 스테이션으로 확장할 수 있습니다. 이 소프트웨어에는 여러 스테이션에 대한 (...)
BQMTESTER-MKST-UPDATE — Software Update to enable BQMTESTER to use MKST-3P-ALT-EV2300
BQ-BATTERY-PROGRAMMER-SW 소프트웨어 개발 키트(SDK)는 TI 배터리 관리 제품을 사용하는 팩의 프로그래밍, 테스트 또는 조립 프로세스를 지원하는 강력한 소프트웨어 명령줄 툴 모음입니다. 이 소프트웨어의 실행 파일은 EV2300 통신 트랜스시버용 MKST-3P-ALT-EV2300 MKS 기술 대안과 함께 작동합니다. 실행 파일은 단일 스테이션에서 작동하지만 MKS Technology Inc.의 추가 소프트웨어 및 GUI를 사용하여 여러 스테이션으로 확장할 수 있습니다. 이 소프트웨어에는 여러 스테이션에 대한 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DSBGA (YZF) | 15 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.