펌웨어
BQ27Z846
- Fully integrated battery gas gauge, protector, and authenticator
- Battery chemistries supported include Li-ion with LCO, NMC, or LFP cathodes and with graphite or silicon anodes
- Battery fuel gauging based on patented Dynamic Z-Track technology
- Models battery impedance for accurate time-to-empty predictions for static and dynamic loads
- Automatically adjusts for aging, temperature, and rate-induced effects on the battery
- High-accuracy analog front end with two independent ADCs:
- 18-bit low offset, high resolution delta-sigma ADC for coulomb counting with ±100mV input range
- 16-bit delta-sigma ADC for cell voltage and internal and external temperature sensors
- High-side or low-side current sensing for system flexibility
- Programmable safety and protection:
- Hardware-level OVP, UVP, OCC, OCD, SCD protections
-
Firmware-level OVP, UVP, OCC, OCD, UT, OT, FETF, CTO, PCHGC, and more...
- Integrated high efficiency high-side NMOS protection FET drivers
- Up to 1MHz I2C bus communications interface with 1.2V- and 1.8V-level support
- ECC ECDSA and SHA-256 authentication support with secure memory
-
Wake from push-button or charger detect
-
True zero-volt charging to support dead battery charging
- Ultra-compact, 15-ball DSBGA package (YAH)
The Texas Instruments BQ27Z846 Dynamic Z-Trackgas gauge device is a fully integrated and accurate,1-series cell gas gauge, protection, and authentication option.
The BQ27Z846 gas gauge communicates through an I2C compatible interface and combines an ultra-low power RISC processor, high accuracy analog measurement capabilities, integrated flash memory, high-side NMOS FET drivers, and ECC ECDSA and SHA-2 authentication to provide a complete, high-performance battery management option.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
6개 모두 보기
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | BQ27Z846 Dynamic Z-Track™ Gauge with Integrated Protection and Authentication for 1 Cell Battery Packs datasheet | PDF | HTML | 2026/04/30 |
| User guide | BQ27z846 Technical Reference Manual | PDF | HTML | 2025/09/03 | |
| Application note | Dynamic Z-Track™ Technology: An Advanced Battery Gauging Algorithm for Dynamic Load Applications (Rev. A) | PDF | HTML | 2025/07/15 | |
| Application note | Implementation of Elliptic Curve Cryptography Authentication on TI Battery Fuel Gauges | PDF | HTML | 2025/05/28 | |
| Application note | How to Create and Program Authentication Keys into TI Battery Fuel Gauges | PDF | HTML | 2025/03/05 | |
| Application note | Battery Gauging Algorithm Comparison | PDF | HTML | 2023/12/04 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
BQ27Z846EVM — BQ27Z846 evaluation module
The BQ27Z846 evaluation module (EVM) is a system-level board created to enable users to evaluate the functionalities of the BQ27Z846 fuel gauge within a system. The BQ27Z846 EVM is suitable for applications in which the battery pack is 1-S cell, meaning one series cell. The EVM includes a BQ27Z846 (...)
평가 모듈(EVM)용 GUI
BQSTUDIO-GUI — Battery Management Studio (bqStudio) Software - Web Based Version
Battery Management Studio (bqStudio) offers a full suite of robust tools to assist with the process of evaluating, designing with, configuring, testing, or otherwise utilizing TI Battery management products. This includes features that provide full access to registers and data memory including (...)
지원되는 제품 및 하드웨어
소프트웨어 프로그래밍 도구
BQ-BMS-PROGRAMMER-SW — Command line programmers for BQ products
BQ-BATTERY-PROGRAMMER-SW software development kit (SDK) is a collection of robust software command line tools that assist with the process of programming, testing, or assembling packs that use TI Battery management products. The executables in this software work with the MKST-3P-ALT-EV2300 MKS (...)
지원되는 제품 및 하드웨어
설계 툴
BQ27Z846-DS — BQ27z846 documentation & software
Early access to bq27z846 documentation and assets. PLEASE DO NOT SEND OVER EMAIL. CUSTOMERS CAN REUQEST ACCESS.
지원되는 제품 및 하드웨어
시뮬레이션 툴
BQAMBER-SIM-TOOL — BGP release page for BQAMBER-SIM-TOOLS
BGP release page for BQAMBER-SIM-TOOLS
지원되는 제품 및 하드웨어
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DSBGA (YAH) | 15 | Ultra Librarian |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.