BQ77216
- 3-series cell to 16-series cell protection
- High-accuracy overvoltage protection
- ± 10mV at 25°C
- ± 20mV from 0°C to 60°C
- Overvoltage protection options from 3.55V to 5.1V
- Undervoltage protection with options from 1.0V to 3.5V
- Open-wire connection detection
- Overtemperature protection
- Undertemperature protection
- Random cell connection
- Functional safety-capable
- Fixed internal delay timers
- Fixed detections thresholds
- Fixed output drive type for each of COUT and DOUT
- Active high or active low
- Active high drive to 6V
- Open drain with the ability to be pulled up externally to VDD
- Low power consumption ICC ≈ 1µA (VCELL(ALL) < VOV)
- Low leakage current per cell input < 100nA with open wire detection disabled
- Package footprint options:
- Leaded 24-pin TSSOP with 0.65mm lead pitch
The BQ77216xx family of products provides a range of voltage and temperature monitoring, including overvoltage (OVP), undervoltage (UVP), open wire (OW), undertemperature (UT), and overtemperature (OT) protection for Li-ion battery pack systems. Each cell is monitored independently for overvoltage, undervoltage, and open-wire conditions. With the addition of an external NTC thermistor, the device can detect undertemperature and overtemperature conditions.
In the BQ77216xx device, an internal delay timer is initiated upon detection of an overvoltage, undervoltage, open-wire,undertemperature, or overtemperature condition. Upon expiration of the delay timer, the respective output is triggered into its active state (either high or low, depending on the configuration).
Overvoltage triggers the COUT pin if a fault is detected, and undervoltage triggers the DOUT pin if a fault is detected. If an overtemperature or open-wire fault is detected, then the DOUT and COUT are triggered. For quicker production-line testing, the BQ77216xx device provides a Customer Test Mode (CTM) with greatly reduced delay time.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | BQ77216xx Voltage and Temperature Protection for 3-Series to 16-Series Cell Li-Ion Batteries with Internal Delay Timer datasheet (Rev. L) | PDF | HTML | 2025/09/18 |
| Technical article | 페달에 전원 공급 전기 자전거 및 전기 스쿠터를 위한 더 오래 지속되 는 13S, 48V 리튬 이온 배터리 팩 구현 (Rev. A) | PDF | HTML | 2024/05/22 | |
| Functional safety information | BQ77216 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. A) | PDF | HTML | 2021/12/08 | |
| Certificate | BQ77216EVM EU Declaration of Conformity (DoC) | 2020/07/29 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BQ77216EVM — 3 시리즈~16 시리즈 셀 리튬 이온 배터리 평가 모듈(EVM)에 대한 전압 및 온도 보호
완벽한 평가 시스템입니다. 회로 모듈에는 16 시리즈 셀 리튬 이온 배터리 팩에서
과충전, 과방전 및 과열 상태를 알리는 전체 평가 시스템을 제공하기 위한
BQ77216 IC(통합 회로), 서미스터 및 셀 시뮬레이션 저항이 포함되어 있습니다.
PMP23329 — Arm® Cortex® M0+ 프로세서를 탑재한 양방향 10~16셀 배터리 팩 레퍼런스 설계
TIDA-010208 — 정확한 셀 측정 및 고압측 MOSFET 제어를 지원하는 10s-16s 배터리 팩 레퍼런스 디자인
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TSSOP (PW) | 24 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.