BUF20800
- 18-CHANNEL GAMMA CORRECTION
- 2-CHANNEL PROGRAMMABLE VCOM:
100mA IOUT - 10-BIT RESOLUTION
- RAIL-TO-RAIL OUTPUT
- LOW SUPPLY CURRENT: 900µA/ch
- SUPPLY VOLTAGE: 7V to 18V
- DIGITAL SUPPLY: 2.0V to 5.5V
- INDUSTRY-STANDARD, TWO-WIRE INTERFACE:
3.4MHz High-Speed Mode - HIGH ESD RATING:
4kV HBM, 1kV CDM, 200V MM - DEMO BOARD AND SOFTWARE AVAILABLE
- APPLICATIONS
- REPLACES RESISTOR-BASED GAMMA SOLUTIONS
- TFT-LCD REFERENCE DRIVERS
- DYNAMIC GAMMA CONTROL
PowerPAD is a registered trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
The BUF20800 is a programmable voltage reference generator designed for gamma correction in TFT-LCD panels. It provides 18 programmable outputs for gamma correction and two channels for VCOM adjustment, each with 10-bit resolution.
This programmability replaces the traditional, timeconsuming process of changing resistor values to optimize the various gamma voltages and allows designers to determine the correct gamma voltages for a panel very quickly. Required changes can also be easily implemented without hardware changes.
The BUF20800 uses TIs latest, small-geometry analog CMOS process, which makes it a very competitive choice for full production, not just evaluation.
Programming of each output occurs through an industry-standard, two-wire serial interface. Unlike existing programmable buffers, the BUF20800 offers a high-speed mode that allows clock speeds up to 3.4MHz.
For lower channel count, please contact your local sales or marketing representative.
The BUF20800 is available in an HTSSOP-38 PowerPAD package. It is specified from 40°C to +85°C.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | 18-Channel, Gamma Voltage Generator with Two Programmable Vcom Channels datasheet (Rev. E) | 2007. 12. 5 | ||
| 애플리케이션 노트 | Driving Capacitive Loads with Gamma Buffers | 2012. 11. 20 | |||
| EVM User's guide | BUF20800/BUF20820EVM User Guide | 2011. 4. 8 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTSSOP (DCP) | 38 | Ultra Librarian |