홈 무선 연결 장거리 1GHz 미만 제품 Sub-1 GHz 트랜시버
홈
무선 연결
장거리 1GHz 미만 제품
Sub-1 GHz 트랜시버

CC1150

활성

저전력 무선 애플리케이션을 위해 설계된 고집적 다중 채널 무선 트랜스미터

지금 주문하기
데이터 시트
정오표

CC1150

활성
데이터 시트 지금 주문하기

제품 상세 정보

Protocols Proprietary Modulation scheme (G)MSK, 2(G)FSK, ASK, OOK Frequency bands 300-348, 400-464, 779-928 Type Transmitter TX power (max) (dBm) 10 Data rate (max) (Mbps) 0.5 Rating Catalog Operating temperature range (°C) -40 to 85 Edge AI enabled No
Protocols Proprietary Modulation scheme (G)MSK, 2(G)FSK, ASK, OOK Frequency bands 300-348, 400-464, 779-928 Type Transmitter TX power (max) (dBm) 10 Data rate (max) (Mbps) 0.5 Rating Catalog Operating temperature range (°C) -40 to 85 Edge AI enabled No
VQFN (RGV) 16 16 mm² 4 x 4
  • Small Size
    • QLP 4-mm × 4-mm Package, 16 Pins
  • True Single Chip UHF RF Transmitter
  • Frequency Bands
    • 300 to 348 MHz
    • 400 to 464 MHz
    • 800 to 928 MHz
  • Programmable Data Rate Up to 500 kBaud
  • Low Current Consumption
  • Programmable Output Power Up to +10 dBm for
    All Supported Frequencies
  • Programmable Baseband Modulator
  • Ideal For Multi-channel Operation
  • Very Few External Components
    • Completely On-chip Frequency Synthesizer
    • No External Filters Needed
  • Configurable Packet Handling Hardware
  • Suitable for Frequency Hopping Systems Due to a
    Fast Settling Frequency Synthesizer
  • Optional Forward Error Correction with Interleaving
  • 64-byte TX Data FIFO
  • Suited for Systems Compliant with EN 300 220
    and FCC CFR Part 15
  • Many Powerful Digital Features Allow a High-
    performance RF system to be made Using an
    Inexpensive Microcontroller
  • Efficient SPI interface: All Registers Can be
    Programmed With One "Burst" Transfer
  • Integrated Analog Temperature Sensor
  • Lead-free “Green” Package
  • Flexible Support for Packet Oriented Systems
    • On-chip Support for Sync-Word Insertion,
      Flexible Packet Length and Automatic CRC
      Handling
  • OOK and Flexible ASK Shaping Supported
  • 2-FSK, GFSK and MSK Supported
  • Optional Automatic Whitening of Data
  • Support for Asynchronous Transparent Transmit
    Mode for Backwards Compatibility with Existing
    Radio Communication Protocols
  • Small Size
    • QLP 4-mm × 4-mm Package, 16 Pins
  • True Single Chip UHF RF Transmitter
  • Frequency Bands
    • 300 to 348 MHz
    • 400 to 464 MHz
    • 800 to 928 MHz
  • Programmable Data Rate Up to 500 kBaud
  • Low Current Consumption
  • Programmable Output Power Up to +10 dBm for
    All Supported Frequencies
  • Programmable Baseband Modulator
  • Ideal For Multi-channel Operation
  • Very Few External Components
    • Completely On-chip Frequency Synthesizer
    • No External Filters Needed
  • Configurable Packet Handling Hardware
  • Suitable for Frequency Hopping Systems Due to a
    Fast Settling Frequency Synthesizer
  • Optional Forward Error Correction with Interleaving
  • 64-byte TX Data FIFO
  • Suited for Systems Compliant with EN 300 220
    and FCC CFR Part 15
  • Many Powerful Digital Features Allow a High-
    performance RF system to be made Using an
    Inexpensive Microcontroller
  • Efficient SPI interface: All Registers Can be
    Programmed With One "Burst" Transfer
  • Integrated Analog Temperature Sensor
  • Lead-free “Green” Package
  • Flexible Support for Packet Oriented Systems
    • On-chip Support for Sync-Word Insertion,
      Flexible Packet Length and Automatic CRC
      Handling
  • OOK and Flexible ASK Shaping Supported
  • 2-FSK, GFSK and MSK Supported
  • Optional Automatic Whitening of Data
  • Support for Asynchronous Transparent Transmit
    Mode for Backwards Compatibility with Existing
    Radio Communication Protocols

The CC1150 is a true single-chip UHF transmitter designed for very low power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315-, 433-, 868-, and 915-MHz, but can easily be programmed for operation at other frequencies in the 300 to 348 MHz, 400 to 464 MHz and 800 to 928 MHz bands.

The RF transmitter is integrated with a highly configurable baseband modulator. The modulator supports various modulation formats and has a configurable data rate up to 500 kBaud. The CC1150 device provides extensive hardware support for packet handling, data buffering and burst transmissions.

The main operating parameters and the 64-byte transmit FIFO of CC1150 can be controlled via an SPI interface. In a typical system, the CC1150 device will be used together with a microcontroller and a few additional passive components.

CC1150 is part of the SmartRF™ technology platform based on 0.18-µm CMOS technology from Texas Instruments.

The CC1150 is a true single-chip UHF transmitter designed for very low power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315-, 433-, 868-, and 915-MHz, but can easily be programmed for operation at other frequencies in the 300 to 348 MHz, 400 to 464 MHz and 800 to 928 MHz bands.

The RF transmitter is integrated with a highly configurable baseband modulator. The modulator supports various modulation formats and has a configurable data rate up to 500 kBaud. The CC1150 device provides extensive hardware support for packet handling, data buffering and burst transmissions.

The main operating parameters and the 64-byte transmit FIFO of CC1150 can be controlled via an SPI interface. In a typical system, the CC1150 device will be used together with a microcontroller and a few additional passive components.

CC1150 is part of the SmartRF™ technology platform based on 0.18-µm CMOS technology from Texas Instruments.
filter 기타 Sub-1 GHz 트랜시버 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 유사한 기능
CC115L 활성 밸류 라인 Sub-1GHz 무선 트랜스미터 This product has lower performance and costs less.

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
26개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet CC1150 Low Power Sub-1 GHz RF Transmitter datasheet (Rev. B) PDF | HTML 2015/03/31
* Errata CC1150 SIlicon Errata (Rev. D) 2015/09/21
* Radiation & reliability report CC1150 Reliability report 2007/07/16
Application note DN035 -- Antenna Quick Guide (Rev. B) 2022/02/09
Application note Debugging Communication Range (Rev. A) PDF | HTML 2019/05/23
Application note DN507 -- FEC Decoding 2019/03/21
Application note CRC Implementation (Rev. E) PDF | HTML 2018/09/27
Application note AN098 - Layout Review Techniques for Low Power RF Designs (Rev. A) 2012/08/02
Application note DN025 -- Johanson Technology Matched Balun Filters (Rev. A) 2011/10/13
Application note DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C) 2011/08/30
Application note AN095 -- Continuous Data Streaming Applications - Using Serial Synchronous Mode (Rev. A) 2011/07/18
Application note AN058 -- Antenna Selection Guide (Rev. B) 2010/10/06
Application note DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary 2010/08/26
Application note DN006 -- CC11xx Settings for FCC15.247 Solutions (Rev. B) 2010/08/17
Application note DN500 -- Packet Transmission Basics (Rev. C) 2009/04/06
Application note AN069 -- Low Cost Long Range One Way Audio Communications at 900 MHz (Rev. B) 2009/03/24
Application note DN300 -- SmartRF04EB Troubleshooting (Rev. B) 2009/03/24
Application note DN400 -- Interfacing CC1100 - CC2500 with MSP430 (Rev. A) 2009/03/24
Application note DN501 -- PATABLE Access (Rev. B) 2009/03/24
Application note DN017 -- CC11xx 868/915 MHz RF Matching (Rev. A) 2008/03/31
Application note DN012 -- Programming Output Powers on CC1100 and CC1150 (Rev. A) 2008/01/02
Application note DN503 -- SPI Access (Rev. B) 2007/10/22
Application note DN504 -- FEC Implementation (Rev. A) 2007/10/22
Application note DN506 -- GDO Pin Usage (Rev. A) 2007/10/22
More literature CC1150 Material content 2007/07/16
More literature CC1150 RoHS Confirmation 2006/01/31

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

코드 예제 또는 데모

SWRC021 — CC1100 CC1101 CC1100E CC2500 Examples Libraries

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
다운로드
지원 소프트웨어

SWRC046 — SmartRF(TM) Studio 6.13.1

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
다운로드
계산 툴

SMARTRF-STUDIO-7 — SmartRF Studio

SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
다운로드 옵션
설계 툴

SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — SimpleLink™ CC1xxx 장치에 대한 하드웨어 설계 검토

SimpleLink™ 1GHz 미만 하드웨어 설계 검토 프로세스 시작하기:
  • 1단계: 검토를 요청하기 전에 기술 문서 및 설계, 해당 제품 페이지에서 사용 가능한 개발 리소스를 검토하는 것이 중요합니다(아래 CC1xxx 제품 페이지 링크 참조).
  • 2단계: 하드웨어 설계 검토 요청 양식을 다운로드해 작성합니다
  • 3단계: 작성한 하드웨어 설계 검토 요청 양식과 필요한 문서를 함께 connectivity-sub1ghz-hw-review@list.ti.com으로 이메일로 보냅니다

SimpleLink 하드웨어 설계 검토 프로세스는 설계를 검토하고 (...)

View Options
회로도

CC1150EM 315-433MHz design files 1.2

SWRR041.ZIP (414 KB)
다운로드
회로도

CC1150EM 868-915MHz design files 3.0 (Rev. A)

SWRR042A.ZIP (376 KB)
다운로드
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
VQFN (RGV) 16 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상