제품 상세 정보

CPU External MCU, External MPU Type MCU or MPU attach, Module Technology Bluetooth® LE, Wi-Fi Protocols Matter, Qualified against Bluetooth® Core 5.4, Wi-Fi 2.4 GHz Operating system Android, FreeRTOS, Linux, Zephyr RTOS Certifications CE, FCC, ISED, MIC, Wi-Fi CERTIFIED Chip Throughput UDP (max) (Mbps) 65 Features 2M PHY, 802.11ax, AP, COEX, Coded PHY, Extended advertising, LE Secure Connections, STA Edge AI enabled No Security Secure communication, Secure firmware & software update Rating Catalog Operating temperature range (°C) -40 to 85
CPU External MCU, External MPU Type MCU or MPU attach, Module Technology Bluetooth® LE, Wi-Fi Protocols Matter, Qualified against Bluetooth® Core 5.4, Wi-Fi 2.4 GHz Operating system Android, FreeRTOS, Linux, Zephyr RTOS Certifications CE, FCC, ISED, MIC, Wi-Fi CERTIFIED Chip Throughput UDP (max) (Mbps) 65 Features 2M PHY, 802.11ax, AP, COEX, Coded PHY, Extended advertising, LE Secure Connections, STA Edge AI enabled No Security Secure communication, Secure firmware & software update Rating Catalog Operating temperature range (°C) -40 to 85
QFM (MOZ) 65 121 mm² (11 mm × 11 mm)

Key Features

  • Wi-Fi 6 (802.11ax)
  • Bluetooth Low Energy 5.4 in CC33x1MOD
  • Companion module to any processor or MCU host capable of running a TCP/IP stack
  • Integrated 2.4GHz PA for a complete wireless system with up to +18.4dBm output power
  • Operating temperature: –40°C to +85°C
  • Application throughput up to 50Mbps
  • Regulatory Certification
    • FCC: Z64-CC33SBMOD
    • IC/ISED: 451I-CC33SBMOD
    • ETSI/CE
    • MIC (TELEC): 201-250389 (Test Grade: 01), 201-250390 (Test Grade: 00)
  • Based on CC3301 QuickTrack Qualified chipset
  • Bluetooth Controller Subsystem Qualified
Extended Features

  • Wi-Fi 6
    • 2.4GHz, 20MHz, single spatial stream
    • MAC, baseband, and RF transceiver with support for IEEE 802.11 b/g/n/ax
    • Target wake time (TWT), OFDMA, MU-MIMO (downlink), Basic Service Set Coloring, and trigger-based transmission for improved efficiency
    • Hardware-based encryption and decryption supporting WPA2 and WPA3
    • Excellent interoperability
    • Support for 4-bit SDIO or SPI host interfaces
  • Bluetooth Low Energy 5.4
    • LE Coded PHYs (long range), LE 2M PHY (high speed), and Advertising Extension
    • Host controller interface (HCI) transport with an option for UART or shared SDIO
    • Internal coexistence mechanism with Wi-Fi to share the same RF chains and antenna
  • Enhanced Security
    • Secured host interface
    • Firmware authentication
    • Anti-rollback protection
  • Multirole support (for example, concurrent STA and AP) to connect with Wi-Fi devices on different RF channels (Wi-Fi networks)
  • Optional antenna diversity or selection
  • 3-wire or 1-wire PTA for external coexistence with additional 2.4GHz radios (for example, Thread or Zigbee)
  • Clock sources

    • 40MHz XTAL fast clock (Integrated into the module)
    • Internal slow clock or external 32.768kHz slow clock
  • Small package size
    • Easy to design with 65-pin, 11mm × 11mm LGA package, 0.65mm pitch

Key Features

  • Wi-Fi 6 (802.11ax)
  • Bluetooth Low Energy 5.4 in CC33x1MOD
  • Companion module to any processor or MCU host capable of running a TCP/IP stack
  • Integrated 2.4GHz PA for a complete wireless system with up to +18.4dBm output power
  • Operating temperature: –40°C to +85°C
  • Application throughput up to 50Mbps
  • Regulatory Certification
    • FCC: Z64-CC33SBMOD
    • IC/ISED: 451I-CC33SBMOD
    • ETSI/CE
    • MIC (TELEC): 201-250389 (Test Grade: 01), 201-250390 (Test Grade: 00)
  • Based on CC3301 QuickTrack Qualified chipset
  • Bluetooth Controller Subsystem Qualified
Extended Features

  • Wi-Fi 6
    • 2.4GHz, 20MHz, single spatial stream
    • MAC, baseband, and RF transceiver with support for IEEE 802.11 b/g/n/ax
    • Target wake time (TWT), OFDMA, MU-MIMO (downlink), Basic Service Set Coloring, and trigger-based transmission for improved efficiency
    • Hardware-based encryption and decryption supporting WPA2 and WPA3
    • Excellent interoperability
    • Support for 4-bit SDIO or SPI host interfaces
  • Bluetooth Low Energy 5.4
    • LE Coded PHYs (long range), LE 2M PHY (high speed), and Advertising Extension
    • Host controller interface (HCI) transport with an option for UART or shared SDIO
    • Internal coexistence mechanism with Wi-Fi to share the same RF chains and antenna
  • Enhanced Security
    • Secured host interface
    • Firmware authentication
    • Anti-rollback protection
  • Multirole support (for example, concurrent STA and AP) to connect with Wi-Fi devices on different RF channels (Wi-Fi networks)
  • Optional antenna diversity or selection
  • 3-wire or 1-wire PTA for external coexistence with additional 2.4GHz radios (for example, Thread or Zigbee)
  • Clock sources

    • 40MHz XTAL fast clock (Integrated into the module)
    • Internal slow clock or external 32.768kHz slow clock
  • Small package size
    • Easy to design with 65-pin, 11mm × 11mm LGA package, 0.65mm pitch

The SimpleLink™ Wi-Fi CC33xx family of devices is where affordability meets reliability, enabling engineers to connect more applications with confidence. CC330xMOD devices are certified modules designed to simplify hardware design and reduce time-to-market.

  • CC3300MOD: A 2.4GHz Wi-Fi 6 companion module
  • CC3301MOD: A 2.4GHz Wi-Fi 6 and Bluetooth Low Energy 5.4 companion module

The CC330xMOD offers the latest standards from Wi-Fi and BLE while maintaining compatibility with Wi-Fi 4 (802.11 b/g/n). These CC330xMOD devices are based on the 10th-generation connectivity combo chip from Texas Instruments. As such, the CC330xMOD is based on proven technology. These modules are an excellent choice to use in cost-sensitive embedded applications with a Linux or RTOS host running TCP/IP. CC330xMOD brings the efficiency of Wi-Fi 6 to embedded device applications for the Internet of Things (IoT).

The SimpleLink™ Wi-Fi CC33xx family of devices is where affordability meets reliability, enabling engineers to connect more applications with confidence. CC330xMOD devices are certified modules designed to simplify hardware design and reduce time-to-market.

  • CC3300MOD: A 2.4GHz Wi-Fi 6 companion module
  • CC3301MOD: A 2.4GHz Wi-Fi 6 and Bluetooth Low Energy 5.4 companion module

The CC330xMOD offers the latest standards from Wi-Fi and BLE while maintaining compatibility with Wi-Fi 4 (802.11 b/g/n). These CC330xMOD devices are based on the 10th-generation connectivity combo chip from Texas Instruments. As such, the CC330xMOD is based on proven technology. These modules are an excellent choice to use in cost-sensitive embedded applications with a Linux or RTOS host running TCP/IP. CC330xMOD brings the efficiency of Wi-Fi 6 to embedded device applications for the Internet of Things (IoT).

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
신규 CC3351MOD 활성 SimpleLink™ 이중 대역(2.4GHz 및 5GHz) Wi-Fi® 6 및 Bluetooth® 저에너지 컴패니언 모듈 Alternative with 5GHz capabailty
신규 CC3300MOD 활성 SimpleLink™ Wi-Fi 6 컴패니언 모듈 Wi-Fi only variant

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
10개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 CC330xMOD SimpleLink™ Wi-Fi 6 and Bluetooth® Low Energy Companion Module datasheet (Rev. A) PDF | HTML 2025. 8. 12
사용 설명서 CC33xx Hardware Integration User's Guide (Rev. B) PDF | HTML 2026. 6. 17
인증서 Module Certification Request Form (Change in ID / Change in Multiple Listing) (Rev. A) 2026. 5. 29
사용 설명서 WFA QuickTrack Control Application With CC33xx User's Guide (Rev. A) PDF | HTML 2024. 7. 22
사용 설명서 CC33xx WLAN Features User's Guide (Rev. B) PDF | HTML 2024. 4. 15
애플리케이션 노트 SimpleLink CC33xx Security Features (Rev. A) PDF | HTML 2024. 2. 2
기술 문서 How little-known capabilities of Wi-Fi®︎ 6 help connect IoT devices with confidence PDF | HTML 2024. 1. 2
애플리케이션 노트 CC33xx Production Line Guide (Rev. A) PDF | HTML 2023. 11. 16
애플리케이션 노트 SimpleLink CC33xx Host Interfaces PDF | HTML 2023. 10. 2
Application brief Development Platform for a Smart, Connected AC Level 2 EV Charging Station PDF | HTML 2023. 7. 11

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

BP-CC3301MOD — SimpleLink™ CC3301MOD Wi-Fi 6 및 Bluetooth® 저에너지 BoosterPack™ 플러그인 모듈

SimpleLink™ CC3301MOD Wi-Fi 6 및 Bluetooth® 저에너지 장치는 Linux® 또는 RTOS를 실행하는 MCU 호스트를 사용하여 임베디드 애플리케이션에서 경제적이고 안정적이며 안전한 연결을 지원합니다. CC3301MOD BoosterPack™ 플러그인 모듈(BP-CC3301MOD)은 TI LaunchPad 개발 키트 또는 프로세서 보드에 손쉽게 연결할 수 있는 테스트 및 개발 보드로, 소프트웨어 개발을 빠르게 지원합니다.

이 키트는 다음 3가지 구성으로 사용할 수 있습니다.

  1. MCU 및 RTOS 평가: (...)
사용 설명서: PDF | HTML
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
IDE, 구성, 컴파일러 또는 디버거

CCSTUDIO — Code Composer Studio integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

지원되는 제품 및 하드웨어
애플리케이션 소프트웨어 및 프레임워크

SIMPLELINK-CONNECT — SimpleLink Connect App for the SimpleLink Low Power SDKs

SimpleLink Connect 모바일 앱은 모바일 기기용 Bluetooth® 저에너지 애플리케이션의 다음 기능과 함께 작동합니다.

  • SIMPLELINK-LOWPOWER-SDK를 실행하는 CC23XX 장치
  • CC33XX-SOFTWARE를 실행하는 호스트에 연결된 CC33xx 장치

이 앱은 사용자가 iOS 또는 Android를 사용하여 자신의 모바일 앱을 빠르게 구축할 수 있는 기준을 제공합니다. 소스 코드가 제공되므로 쉽게 사용자 지정할 수 있습니다.

지원되는 제품 및 하드웨어
애플리케이션 소프트웨어 및 프레임워크

SIMPLELINK-WIFI-TOOLBOX — SimpleLink Wi-Fi Toolbox collection of tools to help development and testing of the CC33xx and CC35xxE Devices

이 Wi-Fi 툴박스 패키지는 호스트를 통해 WLAN/Bluetooth® Low Energy 펌웨어를 디버깅 및 모니터링하고, RF 검증 테스트를 수행하며, 규정 인증 테스트를 위한 사전 테스트를 실행하고, 하드웨어 및 소프트웨어 플랫폼 통합 문제를 디버깅하는 데 필요한 모든 기능을 제공합니다.

지원되는 제품 및 하드웨어
드라이버 또는 라이브러리

CC33XX-LINUX-MPU — CC33xx device driver source for MPUs running Linux OS.

CC33XX 디바이스는 Linux 및 RTOS 기반 시스템 모두에 적합한 싱글 및 듀얼 밴드 Wi-Fi 6 및 Bluetooth 저에너지 5.4 컴패니언 디바이스입니다. CC33XX-SOFTWARE는 CC3300, CC3301, CC3350 and CC3351 디바이스를 위한 Linux 또는 RTOS 환경에서 신속한 설정, 즉시 사용 가능한 경험 및 개발 가속화를 원활하게 하기 위한 소프트웨어 개발 소스 모음입니다.

지원되는 제품 및 하드웨어
드라이버 또는 라이브러리

CC33XX-LINUX-MPU-PORTS-SW — CC33XX-LINUX-MPU Ports to LTS kernels and other HW platforms

CC33XX 디바이스는 Linux 및 RTOS 기반 시스템 모두에 적합한 싱글 및 듀얼 밴드 Wi-Fi 6 및 Bluetooth 저에너지 5.4 컴패니언 디바이스입니다. CC33XX-SOFTWARE는 CC3300, CC3301, CC3350 and CC3351 디바이스를 위한 Linux 또는 RTOS 환경에서 신속한 설정, 즉시 사용 가능한 경험 및 개발 가속화를 원활하게 하기 위한 소프트웨어 개발 소스 모음입니다.

지원되는 제품 및 하드웨어
드라이버 또는 라이브러리

CC33XX-RTOS-MCU — CC33xx device driver for MCU and RTOS platforms

CC33XX 디바이스는 Linux 및 RTOS 기반 시스템 모두에 적합한 싱글 및 듀얼 밴드 Wi-Fi 6 및 Bluetooth 저에너지 5.4 컴패니언 디바이스입니다. CC33XX-SOFTWARE는 CC3300, CC3301, CC3350 and CC3351 디바이스를 위한 Linux 또는 RTOS 환경에서 신속한 설정, 즉시 사용 가능한 경험 및 개발 가속화를 원활하게 하기 위한 소프트웨어 개발 소스 모음입니다.

지원되는 제품 및 하드웨어
지원 소프트웨어

CC33XX-QUICKTRACK-CONTROL-TOOL — CC33XX QuickTrack 제어 앱은 Wi-Fi® 인증에 사용되는 Wi-Fi 자동화 테스트 툴입니다

CC33XX 디바이스는 Linux 및 RTOS 기반 시스템 모두에 적합한 싱글 및 듀얼 밴드 Wi-Fi 6 및 Bluetooth 저에너지 5.4 컴패니언 디바이스입니다. CC33XX-SOFTWARE는 CC3300, CC3301, CC3350 and CC3351 디바이스를 위한 Linux 또는 RTOS 환경에서 신속한 설정, 즉시 사용 가능한 경험 및 개발 가속화를 원활하게 하기 위한 소프트웨어 개발 소스 모음입니다.

지원되는 제품 및 하드웨어
인증

SIMPLELINK-CC33XX-REPORTS — Reports: CC33xx Regulatory Certification

CC3XXX 인증 지원을 찾고 계십니까? SIMPLELINK-CC3XXX-CERTIFCATION은 CC31XX, CC32XX 및 CC33XX 제품의 성공적인 인증을 위한 관련 정보와 지원을 제공합니다. 이 페이지에서는 칩 다운 솔루션을 사용한 설계를 위한 TI의 모듈에 대한 최신 인증 보고서와 평가 보드를 확인할 수 있습니다.

지원되는 제품 및 하드웨어
설계 툴

CC33XX-DESIGN-TOOLS — Design resources for CC33xx and CC33xxMOD Devices

Design resources for CC33xx devices including design files and design checklists
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
QFM (MOZ) 65 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상