CDCE913-Q1
- Qualified for automotive applications
- AEC-Q100 qualified with the following results:
- Device temperature grades
- Grade 1 For CDCE913-Q1: –40°C to +125°C ambient operating temperature
- Grade 3 For CDCEL913-Q1: –40°C to +85°C ambient operating temperature
- Device HBM ESD classification level H2
- Device CDM ESD classification level C6
- Device temperature grades
- Functional Safety-Capable
- In-system programmability and EEPROM
- Serial programmable volatile register
- Nonvolatile EEPROM to store customer settings
- Flexible input clocking concept
- External crystal: 8MHz to 32MHz
- On-chip VCXO: pull range ±150ppm
- Single-ended LVCMOS up to 160MHz
- Free selectable output frequency up to 230MHz
- Low-noise PLL core
- PLL loop filter components integrated
- Low period jitter (typical 50ps)
- Separate output supply pins:
- CDCE913-Q1: 3.3V and 2.5V
- CDCEL913-Q1: 1.8V
- Flexible clock driver
- Three user-definable control inputs [S0, S1, S2], for example, SSC selection, frequency switching, output enable, or power down
- Generates highly accurate clocks for video, audio, USB, IEEE1394, RFID, Bluetooth, WLAN, Ethernet, and GPS
- Generates common clock frequencies used with TI- DaVinci™, OMAP™, DSPs
- Programmable SSC modulation
- Enables 0-PPM clock generation
- 1.8V device power supply
- Packaged in TSSOP
- Development and programming kit for easy PLL design and programming (TI Pro-Clock™)
The CDCE913-Q1 and CDCEL913-Q1 devices are modular, phase-locked loop (PLL)-based programmable clock synthesizers. These devices provide flexible and programmable options, such as output clocks, input signals, and control pins, so that the user can configure the CDCE913-Q1 and CDCEL913-Q1 for their own specifications.
The CDCE913-Q1 and CDCEL913-Q1 generate up to three output clocks from a single input frequency to enable both board space and cost savings. Additionally, with multiple outputs, the clock generator can replace multiple crystals with one clock generator. This makes the device well-suited for head unit and telematics applications in infotainment and camera systems in ADAS, as these platforms are evolving into smaller and more cost effective systems.
Also, each output can be programmed in-system for any clock frequency up to 230MHz through the integrated, configurable PLL. The PLL also supports spread-spectrum clocking (SSC) with programmable down and center spread. This provides better electromagnetic interference (EMI) performance to enable customers to pass industry standards such as CISPR-25.
Customization of frequency programming and SSC are accessed using three, user-defined control pins. This eliminates the need to use an additional interface to control the clock. Specific power-up and power-down sequences can also be defined to the user’s needs.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
CDCE913PERF-EVM — CDCE913 성능 평가 모듈
The CDCE913Perf-Evaluation Module allows the verification of the functionality and performance of CDCE913 and CDCEL913 with the options of crystal and 1.8 V LVCMOS inputs. The outputs can be connected to the Oscilloscope directly with SMA cables.
CDCEL9XXPROGEVM — CDCE(L)949 제품군 EEPROM 프로그래밍 보드
The clock generator CDCE(L)949 family has integrated EEPROM that allows the default frequency settings to be saved upon start up. CDCEL9XXPROGEVM is a programming board that allows a fast programming of prototyping samples or small production quantities. It applies to all 8 devices in the family: (...)
CLOCK-TREE-ARCHITECT — 클록 트리 아키텍트 프로그래밍 소프트웨어
클록 트리 아키텍트는 시스템 요구 사항에 따라 클록 트리 솔루션을 생성하여 설계 프로세스를 간소화하는 클록 트리 합성 툴입니다. 이 툴은 광범위한 클로킹 제품 데이터베이스에서 데이터를 가져와 시스템 수준의 다중 칩 클로킹 솔루션을 생성합니다.
TIDA-01425 — 이더넷 및 CAN을 지원하는 오토모티브 독립형 게이트웨이 레퍼런스 디자인
TIDA-01425는 게이트웨이 애플리케이션의 대역폭과 처리 성능을 높이는 데 중점을 둔 차량용 게이트웨이를 위한 서브시스템 레퍼런스 설계입니다. 이 설계는 대역폭을 늘리기 위해 이더넷 물리 계층 트랜시버(PHY)를 구현하고 차량용 프로세서를 통해 처리 능력을 향상시켜 차량용 게이트웨이가 더 빠른 속도로 더 많은 데이터를 전달할 수 있도록 합니다. 또한 설계 프로세스를 간소화하기 위해 차량 요구 사항 및 배기가스 사양을 염두에 두고 선택한 최대 전력 트리, CAN PHY 및 구성 요소를 갖춘 완전한 차량용 게이트웨이 설계를 위한 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TSSOP (PW) | 14 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.