DRV5056-Q1
- Qualified for automotive applications
- AEC-Q100 qualified with the following results:
- Device temperature grade 0: –40°C to 150°C ambient operating temperature range
- Device HBM ESD classification level 2
- Device CDM ESD classification level C4B
- Functional Safety-Capable
- Unipolar linear hall effect magnetic sensor
- Operates from 3.3-V and 5-V power supplies
- Analog output with 0.6-V quiescent offset:
- Maximizes voltage swing for high accuracy
- Magnetic sensitivity options (at VCC = 5 V):
- A1: 200 mV/mT, 20-mT range
- A2: 100 mV/mT, 39-mT range
- A3: 50 mV/mT, 79-mT range
- A4: 25 mV/mT, 158-mT range
- Fast 20-kHz sensing bandwidth
- Low-noise output with ±1-mA drive
- Compensation for magnet temperature drift
- Standard industry packages:
- Surface-mount SOT-23
- Through-hole TO-92
The DRV5056-Q1 is a linear Hall-effect sensor that responds proportionally to flux density of a magnetic south pole. The device can be used for accurate position sensing in a wide range of applications.
Featuring a unipolar magnetic response, the analog output drives 0.6 V when no magnetic field is present, and increases when a south magnetic pole is applied. This response maximizes the output dynamic range in applications that sense one magnetic pole. Four sensitivity options further maximize the output swing based on the required sensing range.
The device operates from 3.3-V or 5-V power supplies. Magnetic flux perpendicular to the top of the package is sensed, and the two package options provide different sensing directions.
The device uses a ratiometric architecture that can minimize error from VCC tolerance when the external analog-to-digital converter (ADC) uses the same VCC for its reference. Additionally, the device features magnet temperature compensation to counteract how magnets drift for linear performance across a wide –40°C to +150°C temperature range.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DRV5056-Q1 Automotive Unipolar Ratiometric Linear Hall-Effect Sensor datasheet (Rev. B) | PDF | HTML | 2024. 12. 17 | |
| 기능 안전 정보 | DRV5056-Q1 Functional Safety FIT Rate, FMD and Pin FMA | PDF | HTML | 2024. 12. 17 | ||
| Application brief | Introduction to TI Magnetic Sense Simulator Features | PDF | HTML | 2023. 12. 5 | ||
| 사용 설명서 | Texas Instruments' Magnetic Sense Simulator User's Guide | PDF | HTML | 2023. 12. 4 | ||
| 애플리케이션 노트 | Linear Hall-Effect Sensor Angle Measurement Theory, Implementation... (Rev. B) | PDF | HTML | 2021. 11. 5 | ||
| 기술 문서 | Intro to linear Hall effect sensors: Achieve contactless accurate position sensing | PDF | HTML | 2018. 9. 6 | ||
| Application brief | Overview Using Linear Hall Effect Sensors to Measure (Rev. A) | 2018. 8. 22 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DRV5055-5057EVM — DRV5055, DRV5056 및 DRV5057 선형 홀 효과 센서 평가 모듈
HALL-ADAPTER-EVM — 홀 센서 분리 어댑터 평가 모듈
TI-MAGNETIC-SENSE-SIMULATOR — TI Magnetic sensing simulation tool
HALL-PROXIMITY-DESIGN — Magnetic Sensing Proximity Tool
HALL-PROXIMITY-DESIGN은 자석 및 홀(Hall) 효과 센서 시스템을 위한 신속한 반복 설계를 도와주는 소프트웨어 도구입니다.
SBAC231 — DRV5056 Distance Measurement Tool
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TO-92 (LPG) | 3 | Ultra Librarian |
| SOT-23 (DBZ) | 3 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.