DRV8714-Q1
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, TA
- Multi-channel half-bridge gate drivers
- Pin to pin 4 and 8 half-bridge driver variants
- 4.9V to 37V (40V abs. max) operating range
- 4 PWM inputs with output mapping
- Tripler charge pump for 100% PWM
- Half-bridge, H-bridge, and SPI control modes
- Smart multi-stage gate drive architecture
- Adjustable slew rate control
- Adaptive propagation delay control
- 50µA to 62mA peak source current output
- 50µA to 62mA peak sink current output
- Integrated dead-time handshaking
- 2x wide common mode current shunt amplifiers
- Supports inline, high-side, or low-side
- Adjustable gain settings (10, 20, 40, 80V/V)
- Multiple interface options available
- SPI: Detailed configuration and diagnostics
- H/W: Simplified control and less MCU pins
- Compact VQFN packages with wettable flanks
- Integrated protection features
- Dedicated driver disable pin (DRVOFF)
- Low IQ, sleep mode motor braking (BRAKE)
- Supply and regulator voltage monitors
- MOSFET VDS overcurrent monitors
- MOSFET VGS gate fault monitors
- Charge pump for reverse polarity MOSFET
- Offline open load and short circuit diagnostics
- Device thermal warning and shutdown
- Window watchdog timer
- Fault condition interrupt pin (nFAULT)
The DRV871x-Q1 family of devices are highly integrated, multi-channel gate drivers intended for driving multiple motors or loads. The devices integrate either 4 (DRV8714-Q1) or 8 (DRV8718-Q1) half-bridge gate drivers, driver power supplies, current shunt amplifiers, and protection monitors reducing total system complexity, size, and cost.
A smart gate drive architecture manages dead time to prevent shoot-through, controls slew rate to decrease electromagnetic interference (EMI), and optimizes propagation delay for enhanced performance.
Input modes are provided for independent half-bridge or H-bridge control. Four PWM inputs can be multiplexed between the different drivers in combination with SPI control.
Wide common mode shunt amplifiers provide inline current sensing to continuously measure motor current even during recirculating windows. The amplifier can be used in low-side or high-side sense configurations if inline sensing is not required.
The devices provide an array of protection features to promote robust system operation. These include under and overvoltage monitors, VDS overcurrent and VGS gate fault monitors for the external MOSFETs, offline open load and short circuit diagnostics, and internal thermal warning and shutdown protection.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
비교 대상 장치와 유사한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DRV8714H-Q1EVM — 하드웨어 구성을 지원하는 4채널 스마트 게이트 드라이버용 DRV8714H-Q1 평가 모듈
DRV8714H-Q1 평가 모듈(EVM)을 사용하면 인라인 전류 감지를 지원하는 DRV8714H-Q1 4채널 게이트 드라이버를 간편하게 평가할 수 있습니다. 이 EVM의 디바이스는 간소화된 하드웨어 인터페이스가 적용된 40핀 6mm x 6mm RHA 패키지의 한 버전입니다. 이 디바이스는 4.9V부터 40V DC까지 폭넓은 공급 입력 범위를 수용합니다.
DRV8714H-Q1 스마트 게이트 드라이브 아키텍처는 데드 타임을 최적화하여 슈스루 조건을 방지하고 슬루율을 제어합니다. PWM 입력 4개를 사용해 할당된 출력에 대한 PWM (...)
DRV8714S-Q1EVM — SPI 구성을 지원하는 4채널 스마트 게이트 드라이버용 DRV8714S-Q1 평가 모듈
DRV8714S-Q1 평가 모듈(EVM)을 사용하면 인라인 전류 감지와 오프라인 진단을 지원하는 DRV8714S-Q1 4채널 게이트 드라이버를 간편하게 평가할 수 있습니다. 이 EVM에 제공되는 장치는 SPI 인터페이스를 지원하는 56핀 8mm x 8mm RVJ 패키지 변형으로, 4.9V ~ 40V DC의 넓은 공급 입력 범위를 지원합니다.
DRV8714S-Q1 스마트 게이트 드라이브 아키텍처는 데드 타임을 최적화하여 슈스루 조건을 방지하고 슬루율을 제어합니다. PWM 입력 4개를 사용해 할당된 출력에 대한 PWM 주파수 및 듀티 (...)
STK-3P-STK1000 — STK-3P-STK1000 키트와 MSPM0G35xx를 사용하는 애플리케이션 예제
STK-3P-STK1000 애플리케이션 솔루션 TI MSPM0G3519 고성능 MCU 및 DRV8316 모터 드라이버를 기반으로 차량용 애플리케이션을 위해 설계되었으며, 가볍고 안정적인 CAN/LIN 프로토콜 스택을 통합하여 최소한의 리소스 소비로 효율적인 차량 내 네트워크 통신을 달성합니다. 또한 이 소프트웨어에는 고효율, 저잡음 정밀 모터 제어를 제공하는 FOC(자속 기준 제어) 기반 모터 드라이브 알고리즘이 포함되어 있습니다. A/B 파티션 펌웨어 관리를 특징으로 하는 이 플랫폼은 안전한 OTA(over-the-air) (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RHA) | 40 | Ultra Librarian |
| HTQFP (PHP) | 48 | Ultra Librarian |
| VQFN (RVJ) | 56 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.