홈 전력 관리 DC/DC 스위칭 레귤레이터 DC/DC 컨버터
홈
전력 관리
DC/DC 스위칭 레귤레이터
DC/DC 컨버터

LM2588

활성

4V~40V, 5A 스텝업 와이드 VIN 플라이백 레귤레이터(주파수 동기화 지원)

지금 주문하기
데이터 시트

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
LM5158 활성 3A, 85V, 2.2MHz 와이드 VIN 부스트, 플라이백 및 SEPIC 컨버터, 듀얼 랜덤 확산 스펙트럼 지원 Newer device with higher Vout capability and higher switch current

LM2588

활성
지금 주문하기

제품 상세 정보

Rating Catalog Topology Boost, Flyback, Forward, SEPIC Vin (max) (V) 40 Vin (min) (V) 4 Vout (max) (V) 60 Vout (min) (V) 1.23 Switch current limit (typ) (A) 6.5 Features Enable, Frequency synchronization, Nonsynchronous rectification Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.011 Duty cycle (max) (%) 98
Rating Catalog Topology Boost, Flyback, Forward, SEPIC Vin (max) (V) 40 Vin (min) (V) 4 Vout (max) (V) 60 Vout (min) (V) 1.23 Switch current limit (typ) (A) 6.5 Features Enable, Frequency synchronization, Nonsynchronous rectification Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.011 Duty cycle (max) (%) 98
TO-220 (NDZ) 7 82.6008 mm² (10.16 mm × 8.13 mm) TO-263 (KTW) 7 153.924 mm² (10.1 mm × 15.24 mm)
  • Requires Few External Components
  • Family of Standard Inductors and Transformers
  • NPN Output Switches 5 A, Can Stand Off 65 V
  • Wide Input Voltage Range: 4 V to 40 V
  • Adjustable Switching Frequency: 100 kHz to 200 kHz
  • External Shutdown Capability
  • Draws Less Than 60 µA When Shut Down
  • Frequency Synchronization
  • Current-mode Operation for Improved Transient Response, Line Regulation, and Current Limit
  • Internal Soft-start Function Reduces In-rush Current During Start-up
  • Output Transistor Protected by Current Limit, Undervoltage Lockout, and Thermal Shutdown
  • System Output Voltage Tolerance of ±4% Max Over Line and Load Conditions
  • Create a Custom Design Using the LM2588With the WEBENCH® Power Designer
  • Requires Few External Components
  • Family of Standard Inductors and Transformers
  • NPN Output Switches 5 A, Can Stand Off 65 V
  • Wide Input Voltage Range: 4 V to 40 V
  • Adjustable Switching Frequency: 100 kHz to 200 kHz
  • External Shutdown Capability
  • Draws Less Than 60 µA When Shut Down
  • Frequency Synchronization
  • Current-mode Operation for Improved Transient Response, Line Regulation, and Current Limit
  • Internal Soft-start Function Reduces In-rush Current During Start-up
  • Output Transistor Protected by Current Limit, Undervoltage Lockout, and Thermal Shutdown
  • System Output Voltage Tolerance of ±4% Max Over Line and Load Conditions
  • Create a Custom Design Using the LM2588With the WEBENCH® Power Designer

The LM2588 series of regulators are monolithic integrated circuits specifically designed for flyback, step-up (boost), and forward converter applications. The device is available in 4 different output voltage versions: 3.3 V, 5 V, 12 V, and adjustable.

Requiring a minimum number of external components, these regulators are cost effective, and simple to use. Included in this data sheet are typical circuits of boost and flyback regulators. Also listed are selector guides for diodes and capacitors and a family of standard inductors and flyback transformers designed to work with these switching regulators.

The power switch is a 5-A NPN device that can stand-off 65 V. Protecting the power switch are current and thermal limiting circuits, and an undervoltage lockout circuit. This IC contains an adjustable frequency oscillator that can be programmed up to 200 kHz. The oscillator can also be synchronized with other devices, so that multiple devices can operate at the same switching frequency.

Other features include soft start mode to reduce in-rush current during start up, and current mode control for improved rejection of input voltage and output load transients and cycle-by-cycle current limiting. The device also has a shutdown pin, so that it can be turned off externally. An output voltage tolerance of ±4%, within specified input voltages and output load conditions, is ensured for the power supply system.

The LM2588 series of regulators are monolithic integrated circuits specifically designed for flyback, step-up (boost), and forward converter applications. The device is available in 4 different output voltage versions: 3.3 V, 5 V, 12 V, and adjustable.

Requiring a minimum number of external components, these regulators are cost effective, and simple to use. Included in this data sheet are typical circuits of boost and flyback regulators. Also listed are selector guides for diodes and capacitors and a family of standard inductors and flyback transformers designed to work with these switching regulators.

The power switch is a 5-A NPN device that can stand-off 65 V. Protecting the power switch are current and thermal limiting circuits, and an undervoltage lockout circuit. This IC contains an adjustable frequency oscillator that can be programmed up to 200 kHz. The oscillator can also be synchronized with other devices, so that multiple devices can operate at the same switching frequency.

Other features include soft start mode to reduce in-rush current during start up, and current mode control for improved rejection of input voltage and output load transients and cycle-by-cycle current limiting. The device also has a shutdown pin, so that it can be turned off externally. An output voltage tolerance of ±4%, within specified input voltages and output load conditions, is ensured for the power supply system.
filter 기타 DC/DC 컨버터 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
21개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 LM2588 5-A Flyback Regulator With Shutdown datasheet (Rev. E) PDF | HTML 2019. 6. 11
애플리케이션 노트 Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 2024. 3. 25
애플리케이션 노트 스트컨버터의 전력계 기본 계산 (Rev. D) PDF | HTML Download English Version (Rev.D) 2022. 11. 21
선택 가이드 Power Management Guide 2018 (Rev. R) 2018. 6. 25
애플리케이션 노트 Inverted SEPIC Made SIMPLE 2015. 7. 31
애플리케이션 노트 Softstart Using Constant Current Constant Voltage Approach 2015. 7. 24
애플리케이션 노트 Negative Input to Positive Output made SIMPLE 2015. 7. 9
애플리케이션 노트 Working With Boost Converters 2015. 6. 15
애플리케이션 노트 AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 2013. 4. 24
애플리케이션 노트 AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A) 2013. 4. 23
애플리케이션 노트 AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 2013. 4. 23
애플리케이션 노트 AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C) 2013. 4. 23
애플리케이션 노트 AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C) 2013. 4. 23
애플리케이션 노트 AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013. 4. 23
애플리케이션 노트 AN-1082 Adjust or Synchronize LM2586/88 Switching Frequency (Rev. B) 2013. 4. 23
애플리케이션 노트 AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B) 2013. 4. 23
애플리케이션 노트 Simple Techniques Minimize Cross-Coupling in Distributed Power Systems 2007. 3. 21
애플리케이션 노트 Input and Output Capacitor Selection 2005. 9. 19
추가 자료 SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005. 7. 12
애플리케이션 노트 AN-643 EMI/RFI Board Design (Rev. B) 2004. 5. 3
애플리케이션 노트 Understanding Boost Power Stages In Switchmode Power Supplies 1999. 3. 4

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

계산 툴

FLYBUCK-FLYBACK-DESIGN-CALC — Flybuck / Flyback Calculator

이 툴은 전원 공급 장치 엔지니어가 사양에 따라 올바른 절연 DC-DC 토폴로지를 선택하는 데 도움이 됩니다. 선택한 토폴로지에 따라 계산기는 설계에 적합한 IC도 추천합니다.

지원되는 제품 및 하드웨어
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
TO-220 (NDZ) 7 Ultra Librarian
TO-263 (KTW) 7 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상