LM3464
- Wide Input Voltage Range
- 12V-80V (LM3464)
- 12V-95V (LM3464A)
- Dynamic Headroom Control Ensures Maximum Efficiency
- 4 Output Channels With Individual Current Regulation
- High Channel to Channel Accuracy
- Digital PWM/Analog Dimming Control Interface
- Resistor Programmable Dimming Frequency and Minimum Duty Cycle (Analog Dimming Mode)
- Direct Interface to Thermal Sensor
- Fault Detection
- Over Temperature Protection
- Thermal Shutdown
- Under Voltage Lockout
- Thermal Enhanced TSSOP-28 Package
All trademarks are the property of their respective owners.
The LM3464/64A is a 4-channel high voltage current regulator that provides a simple solution for LED lighting applications. The LM3464/64A provides four individual current regulator channels and works in conjunction with external N-channel MOSFETs and sense resistors to give accurate driving current for every LED string. Additionally, the Dynamic Headroom Control (DHC) output can be interfaced to the external power supply to adjust the LED supply voltage to the lowest level that is adequate to maintain all the string currents in regulation, yielding the optimal overall efficiency.
Digital PWM or analog voltage signals can be used to control the duty cycle of the all the channels. When analog control is used, the dimming frequency can be programmed via an external capacitor. A minimum duty cycle control is provided in the conditions that the analog dimming is configured as thermal feedback.
Protection features include VIN under-voltage lock-out, LED open/short circuit and over-temperature fault signaling to the system controller.
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | LM3464/4A LED Driver w/Dynamic Headroom Control & Thermal Control Interfaces datasheet (Rev. F) | 2013/05/01 | |
| White paper | Common LED Functions and LED Driver Design Considerations | 2020/09/21 | ||
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 | ||
| Application note | AN-1656 Design Challenges of Switching LED Drivers (Rev. A) | 2013/05/03 | ||
| Application note | AN-2102 LM3464 and LM5021 DHC 25W Reference Designs (Rev. A) | 2013/05/01 | ||
| User guide | AN-2071 LM3464A 4 Channel LED Driver Evaluation Board (Rev. C) | 2011/06/03 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM3464EVAL — 4채널 LED 드라이버 평가 모듈
The LM3464 is a linear LED driver with Dynamic Headroom Control (DHC) technology designed to drive four serial high power / high brightness LED strings. Four individual linear current regulators with low-side N-channel MOSFETs realize regulations of LED currents. The DHC optimizes system efficiency (...)
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| HTSSOP (PWP) | 28 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.