LM3648
- 1.5-A LED Current Source Programmability
- Accurate and Programmable LED Current Range from 1.954 mA to 1.5 A
- Torch Currents up to 500 mA (LM3648TT)
- Flash Timeout Values up to 1.6 Seconds (LM3648TT)
- Optimized Flash LED Current During Low Battery Conditions (IVFM)
- > 85% Efficiency in Torch Mode (at 100 mA) and Flash Mode (at 1 A to 1.5 A)
- Grounded Cathode LED Operation for Improved Thermal Management
- Small Solution Size: < 16 mm2
- Hardware Strobe Enable (STROBE)
- Synchronization Input for RF Power Amplifier Pulse Events (TX)
- Hardware Torch Enable (TORCH/TEMP)
- Remote NTC Monitoring (TORCH/TEMP)
- 400-kHz I2C-Compatible Interface
- LM3648 (I2C Address = 0x63)
The LM3648 is an LED flash driver that provides a high level of adjustability within a small solution size. The LM3648 utilizes a 2-MHz or 4-MHz fixed-frequency synchronous boost converter to provide power to the 1.5-A constant current LED source. An adaptive regulation method ensures the current source remains in regulation and maximizes efficiency.
Features of the LM3648 are controlled via an I2C-compatible interface. These features include: hardware flash and hardware torch pins (STROBE and TORCH/TEMP), a TX interrupt, and an NTC thermistor monitor. The device offers 64 programmable currents in Flash and 128 levels in Movie Mode (Torch) condition.
The 2-MHz or 4-MHz switching frequency options, overvoltage protection (OVP), and adjustable current limit allow for the use of tiny, low-profile inductors and (10-µF) ceramic capacitors. The device operates over a –40°C to +85°C ambient temperature range.
For all available packages, see the orderable addendum at the end of the data sheet.기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | LM3648 Synchronous Boost LED Flash Driver with 1.5-A High-Side Current Source datasheet (Rev. D) | PDF | HTML | 2016/11/18 |
| Application note | No Boost Inductor Design with LM364x for Long-Time Focusing in Camera Module | PDF | HTML | 2022/02/16 | |
| White paper | Common LED Functions and LED Driver Design Considerations | 2020/09/21 | ||
| Application note | LED Flash-Protection Features | 2017/08/23 | ||
| Application note | Using Flash LED Drivers for Infrared (IR) LED Applications | 2017/03/20 | ||
| Application note | Using the LM3643/4/8 in an Inductorless and/or Simplified PCB Routing Configurat | 2016/10/11 | ||
| Technical article | Shrink your LED flash solution | PDF | HTML | 2015/12/10 | |
| EVM User's guide | Using the LM3648EVM Evaluation Module | 2015/01/26 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM3648EVM — LM3648EVM 1.5A 고압측 전류 소스를 지원하는 동기 부스트 LED 플래시 드라이버
The LM3648EVM aids in evaluation of the LM3648 Synchronous Boost LED Flash Driver W/ 1.5A High-Side Current Source. The 2/4 MHz synchronous boost provides power to the controllable high side current sourcs. The current source can provide a current up to 1.5A with 64 programmable levels (...)
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| DSBGA (YFF) | 12 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.