LM4873
- Input Mux Control and Two Separate Inputs Per Channel
- Stereo Headphone Amplifier Mode
- “Click and Pop” Suppression Circuitry
- Thermal Shutdown Protection Circuitry
- PCB Area-Saving DSBGA and Thin DSBGA Packages
- TSSOP and HTSSOP and WQFN Packages
Key Specifications
- PO at 1% THD+N
- LM4873LQ, 3Ω, 4Ω Loads 2.4W (typ), 2.1 W (typ)
- LM4873MTE-1, 3Ω, 4Ω loads 2.4W (typ), 2.1 W (typ)
- LM4873IBL, 8Ω Load 1.1 W (typ)
- LM4873MTE, 4Ω 1.9 W (typ)
- LM4873, 8Ω 1.1 W (typ)
- Single-Ended Mode THD+N at 75 mW Into 32Ω 0.5 % (max)
- Shutdown Current 0.7 µA (typ)
- Supply Voltage Range 2 to 5.5 V
All trademarks are the property of their respective owners.
The LM4873 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 2.1W to a 4Ω load or 2.4W to a 3Ω load with less than 1.0% THD+N (see Notes below). In addition, the headphone input pin allows the amplifiers to operate in single-ended mode when driving stereo headphones. A MUX control pin allows selection between the two stereo sets of amplifier inputs. The MUX control can also be used to select two different closed-loop responses.
Boomer audio power amplifiers were designed specifically to provide high quality output power from a surface mount package while requiring few external components. To simplify audio system design, the LM4873 combines dual bridge speaker amplifiers and stereo headphone amplifiers on one chip.
The LM4873 features an externally controlled, low-power consumption shutdown mode, a stereo headphone amplifier mode, and thermal shutdown protection. It also utilizes circuitry to reduce “clicks and pops” during device turn-on.
Note: An LM4873MTE-1, LM4873MTE, or LM4873LQ that has been properly mounted to a circuit board will deliver 2.1W into 4Ω. The other package options for the LM4873 will deliver 1.1W into 8Ω. See the sections for further information concerning the LM4873MTE-1, LM4873MTE, and the LM4873LQ.
Note: An LM4873MTE-1, LM4873MTE, or LM4873LQ that has been properly mounted to a circuit board and forced-air cooled will deliver 2.4W into 3Ω.
기술 문서
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | LM4873 Dual 2.1W Audio Amplifier Plus Stereo Headphone Function datasheet (Rev. E) | 2013/05/02 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
패키지 | 핀 | 다운로드 |
---|---|---|
HTSSOP (PWP) | 20 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치