LM5035C

활성

향상된 최대 듀티 사이클을 지원하는 하프 브리지 및 5V SyncFET 드라이브 출력 통합 PWM 컨트롤러

지금 주문하기

데이터 시트

document-pdfAcrobat LM5035C PWM Controller With Integrated Half-Bridge and SyncFET Drivers datasheet (Rev. D) (영어) PDF | HTML

LM5035C

활성

데이터 시트

지금 주문하기

제품 상세 정보

Topology

Half bridge, Push pull

Control mode

Feedforward

Features

Current limiting, High-voltage startup, Multi-topology, Pre-bias startup, Synchronization pin

Duty cycle (max) (%)

50

Topology

Half bridge, Push pull

Control mode

Feedforward

Features

Current limiting, High-voltage startup, Multi-topology, Pre-bias startup, Synchronization pin

Duty cycle (max) (%)

50

HTSSOP (PWP)

20

41.6 mm² 6.5 x 6.4

WQFN (NHZ)

24

20 mm² 5 x 4

105-V and 2-A Half-Bridge Gate Drivers
Synchronous Rectifier Control Outputs With Programmable Delays
Reduced Dead Time Between High and Low-Side Drive for Higher Maximum Duty Cycle.
High Voltage (105 V) Start-Up Regulator
Voltage Mode Control With Line Feedforward and Volt Second Limiting
Resistor Programmed, 2-MHz Capable Oscillator
Programmable Line Undervoltage Lockout and Overvoltage Protection
Internal Thermal Shutdown Protection
Adjustable Soft Start
Versatile Dual Mode Overcurrent Protection With Hiccup Delay Timer
Cycle-by-Cycle Overcurrent Protection
Direct Opto-coupler Interface
Logic Level Synchronous Rectifier Drives
5-V Reference Output
Packages:
- HTSSOP-20 (Thermally Enhanced)
- WQFN-24 (4mm × 5mm)

105-V and 2-A Half-Bridge Gate Drivers
Synchronous Rectifier Control Outputs With Programmable Delays
Reduced Dead Time Between High and Low-Side Drive for Higher Maximum Duty Cycle.
High Voltage (105 V) Start-Up Regulator
Voltage Mode Control With Line Feedforward and Volt Second Limiting
Resistor Programmed, 2-MHz Capable Oscillator
Programmable Line Undervoltage Lockout and Overvoltage Protection
Internal Thermal Shutdown Protection
Adjustable Soft Start
Versatile Dual Mode Overcurrent Protection With Hiccup Delay Timer
Cycle-by-Cycle Overcurrent Protection
Direct Opto-coupler Interface
Logic Level Synchronous Rectifier Drives
5-V Reference Output
Packages:
- HTSSOP-20 (Thermally Enhanced)
- WQFN-24 (4mm × 5mm)

The LM5035C half-bridge controller and gate driver contains all of the features necessary to implement half-bridge topology power converters using voltage mode control with line voltage feedforward.

The LM5035C is a functional variant of the LM5035B half-bridge PWM controller. The amplitude of the SR1 and SR2 waveforms are 5 V instead of the V_CC level. Also, the soft-stop function is disabled in the LM5035C.

The LM5035, LM5035A, LM5035B, and LM5035C include a floating high-side gate driver, which is capable of operating with supply voltages up to 105 V. Both the high-side and low-side gate drivers are capable of 2-A peak. An internal high-voltage start-up regulator is included, along with programmable line undervoltage lockout (UVLO) and overvoltage protection (OVP). The oscillator is programmed with a single resistor to frequencies up to 2 MHz. The oscillator can also be synchronized to an external clock. A current sense input and a programmable timer provide cycle-by-cycle current limit and adjustable hiccup mode overload protection. The differences between LM5035, LM5035A, LM5035B, and LM5035C are summarized in the Device Comparison Table.

The LM5035C half-bridge controller and gate driver contains all of the features necessary to implement half-bridge topology power converters using voltage mode control with line voltage feedforward.

The LM5035C is a functional variant of the LM5035B half-bridge PWM controller. The amplitude of the SR1 and SR2 waveforms are 5 V instead of the V_CC level. Also, the soft-stop function is disabled in the LM5035C.

The LM5035, LM5035A, LM5035B, and LM5035C include a floating high-side gate driver, which is capable of operating with supply voltages up to 105 V. Both the high-side and low-side gate drivers are capable of 2-A peak. An internal high-voltage start-up regulator is included, along with programmable line undervoltage lockout (UVLO) and overvoltage protection (OVP). The oscillator is programmed with a single resistor to frequencies up to 2 MHz. The oscillator can also be synchronized to an external clock. A current sense input and a programmable timer provide cycle-by-cycle current limit and adjustable hiccup mode overload protection. The differences between LM5035, LM5035A, LM5035B, and LM5035C are summarized in the Device Comparison Table.

filter

기타 AC/DC controllers 찾기

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.

1개 모두 보기

상위 문서	유형	직함	형식 옵션	날짜
*	Data sheet	LM5035C PWM Controller With Integrated Half-Bridge and SyncFET Drivers datasheet (Rev. D)	PDF \| HTML	2016/03/23

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LM5035CEVAL — LM5035C용 평가 보드

LM5035C 평가 보드는 LM5035C 컨트롤러를 평가하도록 하프 브리지 토폴로지에 기반을 둔 완전한 기능의 전력 컨버터를 설계 엔지니어에게 제공하기 위해 설계되었습니다. LM5035C는 LM5035B 하프 브리지 PWM 컨트롤러에서 기능적으로 변경된 버전입니다. SR 제어 신호의 진폭은 VCC 레벨 대신 5V입니다. 이 평가 보드는 업계 표준 쿼터 브릭 풋프린트로 제공됩니다.

사용 설명서: PDF