LM723JAN-SP
- 150 mA Output Current without External Pass Transistor
- Output Currents in Excess of 10A Possible by Adding External Transistors
- Input Voltage 40V Max
- Output Voltage Adjustable from 2V to 37V
- Can be Used as Either a Linear or a Switching Regulator
All trademarks are the property of their respective owners.
The LM723 is a voltage regulator designed primarily for series regulator applications. By itself, it will supply output currents up to 150 mA; but external transistors can be added to provide any desired load current. The circuit features extremely low standby current drain, and provision is made for either linear or foldback current limiting.
The LM723 is also useful in a wide range of other applications such as a shunt regulator, a current regulator or a temperature controller.
TI에서 제공하는 제한된 설계 지원
이 제품을 사용하는 기존 프로젝트에는 TI의 설계 지원이 제한되어 있습니다. 가능한 경우 이 페이지에서 관련 자료, 툴 및 소프트웨어를 확인할 수 있습니다. 이 제품을 사용하는 기존 설계에는 TI의 설계 지원이 제한되어 있습니다. TI E2E™ 지원 포럼에서 제한된 설계 지원을 요청하십시오.
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | LM723JAN Voltage Regulator datasheet (Rev. A) | 2013/03/25 | |
| Selection guide | TI Space Products (Rev. L) | 2026/03/27 | ||
| Application note | Hermetic Package Reflow Profiles, Termination Finishes, and Lead Trim and Form (Rev. A) | PDF | HTML | 2025/11/05 | |
| Application brief | DLA Approved Optimizations for QML Products (Rev. C) | PDF | HTML | 2025/06/17 | |
| Application note | Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. B) | PDF | HTML | 2025/06/10 | |
| More literature | TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. B) | 2025/02/20 | ||
| Application note | Single-Event Effects Confidence Interval Calculations (Rev. A) | PDF | HTML | 2022/10/19 | |
| Application note | DLA Standard Microcircuit Drawings (SMD) and JAN Part Numbers Primer | 2020/08/21 | ||
| E-book | Radiation Handbook for Electronics (Rev. A) | 2019/05/21 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| CDIP (J) | 14 | Ultra Librarian |
| TO-CAN (LME) | 10 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.