제품 상세 정보

Local sensor accuracy (max) 2 Type Local Operating temperature range (°C) -55 to 125 Supply voltage (min) (V) 2.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features ALERT, UL recognized Supply current (max) (µA) 500 Temp resolution (max) (Bits) 9 Remote channels (#) 0 Addresses 8 Rating Catalog
Local sensor accuracy (max) 2 Type Local Operating temperature range (°C) -55 to 125 Supply voltage (min) (V) 2.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features ALERT, UL recognized Supply current (max) (µA) 500 Temp resolution (max) (Bits) 9 Remote channels (#) 0 Addresses 8 Rating Catalog
SOIC (D) 8 29.4 mm² 4.9 x 6 VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • No External Components Required
  • Shutdown Mode to Minimize Power Consumption
  • Up to Eight LM75As can be Connected to a Single Bus
  • Power up Defaults Permit Stand-Alone Operation as Thermostat
  • Key Specifications:
    • Supply Voltage
      • LM75A: 2.7 V to 5.5 V
    • Supply Current
      • Operating: 280 µA (Typical)
      • Shutdown: 4 µA (Typical)
    • Temperature Accuracy
      • 25°C to 100°C: ±2°C (Max)
      • 55°C to 125°C: ±3°C (Max)
  • No External Components Required
  • Shutdown Mode to Minimize Power Consumption
  • Up to Eight LM75As can be Connected to a Single Bus
  • Power up Defaults Permit Stand-Alone Operation as Thermostat
  • Key Specifications:
    • Supply Voltage
      • LM75A: 2.7 V to 5.5 V
    • Supply Current
      • Operating: 280 µA (Typical)
      • Shutdown: 4 µA (Typical)
    • Temperature Accuracy
      • 25°C to 100°C: ±2°C (Max)
      • 55°C to 125°C: ±3°C (Max)

The LM75A is an industry-standard digital temperature sensor with an integrated sigma-delta analog-to-digital converter (ADC) and I2C interface. The LM75A provides 9-bit digital temperature readings with an accuracy of ±2°C from –25°C to 100°C and ±3°C over –55°C to 125°C.

The LM75A operates with a single supply from 2.7 V to 5.5 V. Communication is accomplished over a 2-wire interface which operates up to 400 kHz. The LM75A has three address pins, allowing up to eight LM75A devices to operate on the same 2-wire bus. The LM75A has a dedicated overtemperature output (O.S.) with programmable limit and hysteresis. This output has programmable fault tolerance, which lets the user to define the number of consecutive error conditions that must occur before O.S. is activated. The wide temperature and supply range and I2C interface make the LM75A ideal for a number of applications including base stations, electronic test equipment, office electronics, personal computers, and any other system in which thermal management is critical to performance. The LM75A is available in an SOIC-8 package and an VSSOP-8 package.

The LM75A is an industry-standard digital temperature sensor with an integrated sigma-delta analog-to-digital converter (ADC) and I2C interface. The LM75A provides 9-bit digital temperature readings with an accuracy of ±2°C from –25°C to 100°C and ±3°C over –55°C to 125°C.

The LM75A operates with a single supply from 2.7 V to 5.5 V. Communication is accomplished over a 2-wire interface which operates up to 400 kHz. The LM75A has three address pins, allowing up to eight LM75A devices to operate on the same 2-wire bus. The LM75A has a dedicated overtemperature output (O.S.) with programmable limit and hysteresis. This output has programmable fault tolerance, which lets the user to define the number of consecutive error conditions that must occur before O.S. is activated. The wide temperature and supply range and I2C interface make the LM75A ideal for a number of applications including base stations, electronic test equipment, office electronics, personal computers, and any other system in which thermal management is critical to performance. The LM75A is available in an SOIC-8 package and an VSSOP-8 package.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품
TMP1075 활성 업계 표준 LM75/TMP75로 성능을 업그레이드하는 1°C I²C 온도 센서 This product is a digital temperature sensor with improved accuracy (±1°C) and lower max current consumption (4µA)
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
신규 TMP110 미리 보기 소형 X2SON 패키지의 알림을 지원하는 ±1.0°C 정확도 I²C 온도 센서 Device for cost-optimized designs, with improved accuracy (±1.0°C | max), similar register map, wider VCC range (1.14 to 5.5V), in a smaller X2SON-5 package (0.8 × 0.8mm)

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기7
유형 직함 날짜
* Data sheet LM75A Digital Temperature Sensor and Thermal Watchdog With Two-Wire Interface datasheet (Rev. P) PDF | HTML 2014/12/30
Application note LM75B and TMP1075 Industry-Standard Devices: Design Guidelines and Spec Comparison (Rev. A) PDF | HTML 2024/03/07
Application note Temperature sensors: PCB guidelines for surface mount devices (Rev. A) 2019/01/18
Application note Applying I2C-Compatible Temperature Sensors in Systems With Slow Clock Edges (Rev. A) 2013/05/06
User guide LM75A User’s Guide 2013/01/17
User guide LM75AEB User’s Guide (Rev. A) 2012/08/24
Application note Tiny Temperature Sensors for Remote Systems 2003/02/17

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

드라이버 또는 라이브러리

LM75SW-LINUX — I2C 온도 센서용 Linux 드라이버

The Linux driver support LM75 compatible Temperature Sensors. The Linux driver supports communication through the I2C bus and interfaces with the Hardware Monitoring sub-system.
Linux Mainline Status

Available in Linux Main line: Yes
Available through git.ti.com: N/A

Supported Devices:
  • LM75A
  • TMP100
  • TMP101
  • (...)
지원 소프트웨어

SENSOREVAL Eval Board Software For Hardware Monitors And Digital Temperature Sensors

SensorEval
SensorEval software supports the latest TI temperature sensor and hardware monitor evaluation boards via USB interface. It also allows access to sensors mounted directly on motherboards that support Intel chip sets.

  • Download SensorEval Software and Manual
  • Windows XP support is offered for (...)
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
디지털 온도 센서
LM63 팬 제어를 지원하는 1개의 원격 및 로컬 온도 센서 LM64 팬 제어 및 5 GPIO를 지원하는 1 원격 및 로컬 온도 센서 LM71 SPI 인터페이스를 지원하는 ±1.5°C 온도 센서 LM71-Q1 SPI 인터페이스를 갖춘 오토모티브 등급 ±1.5°C 온도 센서 LM73 I2C/SMBus 인터페이스를 지원하는 ±1°C 온도 센서 LM75A 2C 업계 표준 온도 센서, I2C/SMBus 인터페이스 LM86 SMBus 인터페이스를 지원하는 ±0.75°C 원격 및 로컬 온도 센서 LM89 SMBus 인터페이스 및 버스 공유용 2개 주소를 갖춘 ±0.75°C 원격 및 로컬 온도 센터 LM90 SMBus 인터페이스를 지원하는 원격 및 로컬 온도 센서 LM93 하드웨어 모니터링 및 16 전원 공급 전압 모니터링을 지원하는 2 원격, 1 로컬 온도 센서 LM95010 SensorPath 인터페이스를 지원하는 ±2°C 온도 센서 LM95071 SPI 인터페이스를 지원하는 ±1°C 온도 센서 LM95172-Q1 200°C 온도를 견디고 SPI 인터페이스를 지원하는 오토모티브 등급 ±1°C 온도 센서 LM95214 SMBus 인터페이스를 지원하는 ±2°C 쿼드 원격 및 로컬 온도 센서 LM95221 베타 보상 기능 및 SMBus, I2C 인터페이스를 지원하는 ±3°C 듀얼 원격 및 로컬 온도 센서 LM95231 TruTherm 기술과 SMBus 인터페이스를 지원하는 듀얼 원격 및 로컬 온도 센서 LM95233 TruTherm 기술과 SMBus 인터페이스를 지원하는 ±2°C 듀얼 원격 및 로컬 온도 센서 LM95234 TruTherm 기술 및 SMBus 인터페이스를 지원하는 ±2°C 쿼드 원격 및 로컬 온도 센서 LM95235 65/90nm 다이오드용 베타 보상, SMBus를 지원하는 ±0.75°C 원격 및 로컬 온도 센서 LM95235-Q1 TruTherm 기술 및 SMBus를 지원하는 차량용 등급, ±2°C 원격 및 로컬 온도 센서 LM95241 베타 보상 기능 및 SMBus, I2C 인터페이스를 지원하는 ±1.25°C 듀얼 원격 및 로컬 온도 센서 LM95245 45nm 다이오드용 베타 보상, SMBus를 지원하는 ±0.75°C 원격 및 로컬 온도 센서 LM96000 팬 제어를 지원하고 6개의 전원 공급 장치 전압 모니터가 있는 하드웨어 모니터 LM96080 팬 속도 및 전원 공급 전압 모니터링을 지원하는 1 로컬 온도 센서 LM96163 베타 보상 및 팬 제어를 제공하는 1 원격 및 로컬 온도 센서 LM99 TruTherm 기술과 SMBus 인터페이스를 지원하는 원격 및 로컬 온도 센서
정밀 ADC
ADC128D818 12비트, 82SPS, 8채널 델타 시그마 ADC(온도 센서, 내부/외부 전압 레퍼런스 및 I2C 인터페이스 포함)
시뮬레이션 모델

LM75A IBIS Model

SNOM549.ZIP (33 KB) - IBIS Model
패키지 다운로드
SOIC (D) 8 옵션 보기
VSSOP (DGK) 8 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상