LMX2571-EP
- VID#: V62/21613-01XE
- -55 °C to +125 °C Operating Temperature
- Any Frequency From 10 MHz to 1344 MHz
- Low Phase Noise and Spurs
- –123 dBc/Hz at 12.5-kHz Offset at 480 MHz
- –145 dBc/Hz at 1-MHz Offset at 480 MHz
- Normalized PLL Noise Floor of –231 dBc/Hz
- Spurious Better Than –75 dBc/Hz
- New FastLock to Reduce Lock Time
- A Novel Technique to Remove Integer Boundary Spurs
- Integrated 5-V Charge Pump and Output Divider for External VCO Operation
- 2-, 4-, and 8-Level or Arbitrary Level Direct Digital FSK Modulation
- One TX/RX Output or Two Fanout Outputs
- Low Current Consumption
- 39-mA Typical Synthesizer Mode (Internal VCO)
- 9-mA Typical PLL Mode (External VCO)
- 24-Bit Fractional-N Delta Sigma Modulator
- Functional Differences between LMX2571 vs LMX2571-EP
- LMX2571-EP has no TrCtl Pin
- LMX2571-EP has no OSCin* pin, Differential Mode, or Crystal Mode
The LMX2571-EP device is a low-power, high-performance, wideband PLLatinum™ RF synthesizer that integrates a delta-sigma fractional N PLL, multiple core voltage-controlled oscillator (VCO), programmable output dividers and two output buffers. The VCO cores work up to 5.376 GHz resulting in continuous output frequency range of 10 MHz to 1344 MHz.
This synthesizer can also be used with an external VCO. To that end, a dedicated 5-V charge pump and an output divider are available for this configuration.
A unique programmable multiplier is also incorporated to help improve spurs, allowing the system to use every channel even if it falls on an integer boundary.
The output has an integrated SPDT switch that can be used as a transmit and receive switch in FDD radio application. Both outputs can also be turned on to provide 2 outputs at the same time.
The LMX2571-EP supports direct digital FSK modulation through programming or pins. Discrete level FSK, pulse shaping FSK, and analog FM modulation are supported.
A new FastLock technique can be used allowing the user to step from one frequency to the next in less than 1.5 ms even when an external VCO is used with a narrow band loop filter.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
비교 대상 장치와 유사한 기능.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | LMX2571-EP Low-Power, High-Performance PLLatinum RF Synthesizer With FSK Modulation datasheet (Rev. B) | PDF | HTML | 2022. 6. 1 | ||
| 애플리케이션 노트 | Practical Clocking Considerations That Give Your Next High-Speed Converter Design an Edge (Rev. A) | PDF | HTML | 2025. 4. 11 | |||
| Application brief | Compilation of RF Synthesizer Resources | PDF | HTML | 2024. 10. 22 | |||
| 기술 문서 | How to implement FM modulation | PDF | HTML | 2017. 8. 3 | |||
| 애플리케이션 노트 | Frequency Shift Keying with LMX2571 | 2017. 5. 30 | ||||
| 애플리케이션 노트 | LMX2571 Using a Programmable Input Multiplier to Minimize Integer Boundary Spurs | PDF | HTML | 2016. 1. 12 | |||
| 기술 문서 | Timing is Everything: Improving integer boundary spurs in fractional PLL synthesiz | PDF | HTML | 2015. 8. 5 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
텍사스 인스트루먼트 클록 및 신시사이저(TICS) Pro 소프트웨어는 다음 접두사를 사용하여 제품 번호의 평가 모듈(EVM)을 프로그래밍하는 데 사용됩니다. CDC, LMK 및 LMX. 이러한 제품에는 위상 동기 루프 및 전압 제어 오실레이터(PLL+VCO), 신시사이저 및 클로킹 디바이스가 포함되어 있습니다.
CLOCK-TREE-ARCHITECT — 클록 트리 아키텍트 프로그래밍 소프트웨어
클록 트리 아키텍트는 시스템 요구 사항에 따라 클록 트리 솔루션을 생성하여 설계 프로세스를 간소화하는 클록 트리 합성 툴입니다. 이 툴은 광범위한 클로킹 제품 데이터베이스에서 데이터를 가져와 시스템 수준의 다중 칩 클로킹 솔루션을 생성합니다.
PLLATINUMSIM-SW — PLL 루프 필터, 위상 잡음, 잠금 시간, 스퍼 시뮬레이션 툴
PLLATINUMSIM-SW는 사용자가 LMX 계열의 위상 고정 루프(PLL) 및 신시사이저를 포함하는 PLLatinum™ 집적 회로의 상세한 설계 및 시뮬레이션을 만들 수 있는 시뮬레이션 툴입니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RHH) | 36 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.