LMX5453
LMX5453 마이크로 모듈 통합 Bluetooth 2.0 베이스밴드 컨트롤러 및 라디오
LMX5453
- eSCO
- eSCO over USB HCI transport
- Enhanced scatternet
- Interlaced scan
- Flushing
- Audio PCM slave mode support
- Generic PCM configuration
- Compliant with the Bluetooth 2.0 Core Specification
- Better than –80 dBm input sensitivity
- Class 2 operation
- Low power consumption:
- Accepts external clock or crystal input:
- Clocking option 12/13 MHz with PLL bypass mode for
power reduction - 10-20 MHz external clock or crystal network
- Secondary 32.768 kHz oscillator for low-power modes
- Advanced power management features
- Clocking option 12/13 MHz with PLL bypass mode for
- High integration:
- Implemented in 0.18 µm CMOS technology
- RF includes on-chip antenna filter and switch
- On-chip firmware with complete HCI
- Embedded ROM (200K) and Patch RAM (16.6K) memory
- Up to 7 Asynchronous Connection Less (ACL) links
- Support for two simultaneous voice or Extended
Synchronous Connection Oriented (eSCO) and
Synchronous Connection Oriented (SCO) and
links. - Enhanced scatternet
- Interlaced scan
- Flushing
- Audio PCM slave mode support
- Generic PCM configuration
- Fractional-N Sigma/Delta modulator
- Operating voltage range 2.5–3.6V
- I/O voltage range 1.6–3.6V
- 60-pad micro-module BGA package (6.1 mm × 9.1 mm × 1.2 mm)
The LMX5453 is a drop in replacement for the LMX5452.
The LMX5453 has new features added:
The LMX5453 is a highly integrated Bluetooth 2.0 compliant solution. The integrated baseband controller and 2.4 GHz radio combine to form a complete, small form-factor (6.1 mm × 9.1 mm × 1.2 mm) Bluetooth node.
The on-chip memory, ROM, and Patch RAM provide lowest cost and minimize design risk with the flexibility of firmware upgrades.
The firmware supplied in the on-chip ROM supports a complete Bluetooth Link Manager and HCI with communication through a UART or USB interface. This firmware features point-to-point and point-to-multipoint link management, supporting data rates up to 723 kbps.
The radio employs an integrated antenna filter and switch to minimize the number of external components.
The radio has a heterodyne receiver architecture with a low intermediate frequency (IF), which enables the IF filters to be integrated on-chip. The transmitter uses direct IQ-modulation with Gaussian-filtered bit-stream data, a voltage-controlled oscillator (VCO) buffer, and a power amplifier.
The LMX5453 module is lead free and RoHS (Restriction of Hazardous Substances) compliant. For more information on those quality standards, please visit our green compliance website at ** http://www.national.com/quality/green/
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | LMX5453 Micro-Module Integrated Bluetooth 2.0 Baseband Controller and Radio datasheet (Rev. D) | 2014/01/24 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치