전원 관리 선형 및 저손실(LDO) 레귤레이터

LP8340

활성

1A, 10V, 저 IQ, 저손실 전압 레귤레이터

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TLV767 활성 조정 가능 및 고정 출력, 1A, 16V, 양극 전압 저손실(LDO) 선형 레귤레이터 Higher input voltage range

제품 상세 정보

Output options Adjustable Output Iout (max) (A) 1 Vin (max) (V) 10 Vin (min) (V) 2.7 Vout (max) (V) 9.3 Vout (min) (V) 1.25 Noise (µVrms) 250 Iq (typ) (mA) 0.019 Thermal resistance θJA (°C/W) 70 Rating Catalog Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Foldback Overcurrent protection Accuracy (%) 2 PSRR at 100 KHz (dB) 10 Dropout voltage (Vdo) (typ) (mV) 540 Operating temperature range (°C) 0 to 125
Output options Adjustable Output Iout (max) (A) 1 Vin (max) (V) 10 Vin (min) (V) 2.7 Vout (max) (V) 9.3 Vout (min) (V) 1.25 Noise (µVrms) 250 Iq (typ) (mA) 0.019 Thermal resistance θJA (°C/W) 70 Rating Catalog Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Foldback Overcurrent protection Accuracy (%) 2 PSRR at 100 KHz (dB) 10 Dropout voltage (Vdo) (typ) (mV) 540 Operating temperature range (°C) 0 to 125
WSON (NGD) 6 9.6068 mm² 2.92 x 3.29
  • ±1.5% Typical VOUT Tolerance
  • 420mV Typical Dropout @ 1.0A (VO = 5V)
  • Wide Operating Range 2.7V to 10V
  • Internal 1.0A PMOS Output Transistor
  • 19µA Typical Quiescent Current
  • Thermal Overload Limiting
  • Foldback Current Limiting
  • Zener Trimmed Bandgap Reference
  • Space Saving WSON package
  • Temperature Range
    • LP8340C 0°C to 125°C
    • LP8340I −40°C to 125°C

All trademarks are the property of their respective owners.

  • ±1.5% Typical VOUT Tolerance
  • 420mV Typical Dropout @ 1.0A (VO = 5V)
  • Wide Operating Range 2.7V to 10V
  • Internal 1.0A PMOS Output Transistor
  • 19µA Typical Quiescent Current
  • Thermal Overload Limiting
  • Foldback Current Limiting
  • Zener Trimmed Bandgap Reference
  • Space Saving WSON package
  • Temperature Range
    • LP8340C 0°C to 125°C
    • LP8340I −40°C to 125°C

All trademarks are the property of their respective owners.

The LP8340 low-dropout CMOS linear regulator is available in 5V, 3.3V, 2.5V, 1.8V and adjustable output versions. Packaged in the 6ld WSON package and 3ld PFM. The LP8340 can deliver up to 1.0A output current.

Typical dropout voltage is 420mV at 1.0A for the 5.0V version, 540mV at 1.0A for the 3.3V version, 670mV at 1.0A for the 2.5V version and 680mV at 800mA for the 1.8V version.

The LP8340 includes a zener trimmed bandgap voltage reference, foldback current limiting and thermal overload limiting.

The LP8340 features a PMOS output transistor which unlike PNP type low dropout regulators requires no base drive current. This allows the device ground current to remain less than 50µA over operating temperature, supply voltage and irrespective of the load current.

The LP8340 low-dropout CMOS linear regulator is available in 5V, 3.3V, 2.5V, 1.8V and adjustable output versions. Packaged in the 6ld WSON package and 3ld PFM. The LP8340 can deliver up to 1.0A output current.

Typical dropout voltage is 420mV at 1.0A for the 5.0V version, 540mV at 1.0A for the 3.3V version, 670mV at 1.0A for the 2.5V version and 680mV at 800mA for the 1.8V version.

The LP8340 includes a zener trimmed bandgap voltage reference, foldback current limiting and thermal overload limiting.

The LP8340 features a PMOS output transistor which unlike PNP type low dropout regulators requires no base drive current. This allows the device ground current to remain less than 50µA over operating temperature, supply voltage and irrespective of the load current.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기1
유형 직함 날짜
* Data sheet LP8340 Low Dropout, Low IQ, 1.0A CMOS Linear Regulator datasheet (Rev. D) 2013/04/02

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

시뮬레이션 모델

LP8340-ADJ PSpice Transient Model

SNVMAQ3.ZIP (67 KB) - PSpice Model
시뮬레이션 모델

LP8340-ADJ Unencrypted PSpice Transient Model (Rev. A)

SNVMAQ2A.ZIP (2 KB) - PSpice Model
패키지 다운로드
WSON (NGD) 6 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상