MUX809-Q1
- AEC-Q100 qualified for automotive applications
- Device temperature grade 1: –40°C to 125°C ambient operating temperature
- High supply voltage capable:
- Dual supply: ±10V to ±50V
- Single supply: 10V to 100V
- Asymmetric dual supply operation
-
Consistent parametrics across supply voltages
- Latch-up immune
- Low crosstalk: –110dB
- Removes need for additional logic rail (VL)
- 1.8V Logic capable
- Fail-safe logic: up to 48V independent of supply
- Integrated pull-down resistor on logic pins
- Bidirectional signal path
- Break-before-make switching
- Wide operating temperature TA: –40°C to 125°C
- Industry-standard TSSOP and smaller WQFN packages
The MUX808-Q1 and MUX809-Q1 are modern high voltage capable analog multiplexers in 8:1 (single ended) and 4:1 (differential) configurations. The devices work well with dual supplies, a single supply, or asymmetric supplies up to a maximum supply voltage of 100V. The MUX80x-Q1 devices provide consistent analog parametric performance across the entire supply voltage range. The MUX808-Q1 and MUX809-Q1 support bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins.
All logic inputs support logic levels of 1.8V, 3.3V, 5V and can be connected as high as 48V, allowing for system flexibility with control signal voltage. Fail-safe logic circuitry allows voltages on the logic pins to be applied before the supply pin, protecting the device from potential damage.
The device family provides latch-up immunity, preventing undesirable high current events between parasitic structures within the device. A latch-up condition typically continues until the power supply rails are turned off and can lead to device failure. The latch-up immunity feature allows this family of multiplexers to be used in harsh environments.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | MUX80X-Q1 100V, Flat RON , Single 8:1 and Dual 4:1 Multiplexers with Latch-Up Immunity and 1.8V Logic datasheet | PDF | HTML | 2026/03/05 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TMUX-24PW-EVM — 16, 20, 24핀 PW 얇은 수축 소형 아웃라인 패키지(TSSOP)용 TMUX 일반 평가 모듈
TMUX-24PW-EVM 평가 모듈(EVM)을 사용하면 16, 20 또는 24핀 TSSOP 패키지(PW)를 사용하고 고전압 작동에 맞게 정격 조정된 TI의 TMUX 제품 라인의 빠른 프로토타이핑 및 DC 특성화가 가능합니다.
TMUXRUM-RRPEVM — 16핀 RUM 및 RRP QFN(Quad-Flatpack No-Lead) 패키지용 TMUX 일반 평가 모듈
TMUXRUM-RRPEVM을 사용하면 16핀 RUM 또는 RRP 패키지(QFN)를 사용하고 고전압 작동에 맞게 정격 조정된 TI의 TMUX 제품 라인의 빠른 프로토타이핑 및 DC 특성화가 가능합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TSSOP (PW) | 16 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치