이 제품의 최신 버전이 있습니다
PCM5121
- Register-Selectable Audio-Processing Functions up to 48-kHz
fS
- Dynamic Range Control (DRC)
- Equalization (EQ)
- Filtering
- DAC Functionality to 384-kHz fS
- Market-Leading Low Out-of-Band Noise
- Selectable Digital-Filter Latency and Performance
- No DC-Blocking Capacitors Required
- Integrated Negative Charge Pump
- Intelligent Muting System; Soft Up or Down Ramp and Analog Mute for 120-dB Mute SNR
- Integrated High-Performance Audio PLL With BCK Reference to Generate SCK Internally
- Accepts 16-, 20-, 24-, and 32-Bit Audio Data
- PCM Data Formats: I2S, Left-Justified, Right-Justified, TDM / DSP
- SPI or I2C Control
- Software or Hardware Configuration
- Automatic Power-Save Mode When LRCK and BCK are Deactivated
- 1.8-V or 3.3-V Failsafe LVCMOS Digital Inputs
- Single Supply
Operation:
- 3.3-V Analog, 1.8-V or 3.3-V Digital
- Integrated Power-On Reset
- Small28-Pin Package
The PCM512x devices are a family of monolithic CMOS-integrated circuits that include a stereo digital-to-analog converter and additional support circuitry in a small TSSOP package. The PCM512x uses the latest generation of TI’s advanced segment-DAC architecture to achieve excellent dynamic performance and improved tolerance to clock jitter.
Members of the PCM512x family integrate preset audio processing functions with programmable coefficients, allowing developers to change the characteristics of the interpolation filter, speaker EQ, dynamic range controls, and average volume control in their products.
The PCM512x provides 2.1-VRMS ground-centered outputs, allowing designers to eliminate DC-blocking capacitors on the output, as well as external muting circuits traditionally associated with single supply line drivers.
The integrated line driver surpasses all other charge-pump-based line drivers by supporting loads down to 1 kΩ. By supporting loads down to 1 kΩ, the PCM512x can essentially drive up to 10 products in parallel (LCD TV, DVDR, AV receivers, and so forth).
The integrated PLL on the device removes the requirement for a system clock (commonly known as master clock), allowing a 3-wire I2S connection, along with reducing system EMI.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | PCM512x 2-VRMS DirectPath™, 112-dB and 106-dB Audio Stereo DACs With 32-Bit, 384-kHz PCM Interface datasheet (Rev. C) | PDF | HTML | 2018. 10. 25 | |
| 애플리케이션 노트 | A Low Noise, Low Distortion Design for Antialiasing and Anti-Imaging Filters | 2000. 9. 27 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PCM5122EVM-U — PCM5122 평가 모듈
PCM5142EVM-U는 Microsoft Windows™ 운영 체제를 실행하는 개인용 컴퓨터에서 사용할 수 있는 완전한 기능을 갖춘 평가 키트입니다. 이 EVM을 PurePath™ Studio와 함께 사용하여 PCM5142 및 PCM5141의 고정 기능 프로세싱 및 mini-DSP 프로세싱 기능을 활용할 수 있습니다. 필요한 평가 소프트웨어는 PCM5122 또는 PCM5141 제품 폴더에서 온라인으로 확인할 수 있습니다. PCM5142EVM은 TI(텍사스 인스트루먼트)의 EVM 폼 팩터로, 장치 성능과 작동 특성을 직접 평가할 (...)
PUREPATHSTUDIO — PurePath™ Studio graphical development environment
PurePath™ Studio 그래픽 개발 환경은 miniDSP/오디오 처리 기능으로 오디오 제품을 위한 소프트웨어 개발을 간소화할 수 있도록 특별히 설계된, 강력하고 사용이 편리한 툴입니다.
GDE를 사용하면 이러한 장치가 다양한 휴대형 오디오 프로세싱 애플리케이션의 프로세싱 요구 사항을 지원하도록 프로그래밍할 수 있습니다. 프로그래밍은 로우 레벨 및 하이레벨 오디오 프로세싱 구성 요소 라이브러리를 사용하여 그래픽으로 이루어집니다. GDE 오디오 컴포넌트 라이브러리에는 디지털 볼륨 컨트롤, 믹서, 멀티플렉서, 이퀄라이제이션, 톤 (...)
PCM5XXX-DRIVERS — PCM5xxx DAC 제품군 Linux 드라이버 지원
Linux 드라이버는 오디오 스테레오 디지털-아날로그 컨버터(DAC)의 PCM51xx 디바이스 제품군을 지원하며, I2C 및 SPI를 통한 통신, Linux 커널의 ASOC 프레임워크와의 레지스터를 지원합니다. 아래의 "써드파티로 이동" 버튼을 사용하면 git.kernal.org 에서 해당 드라이버를 다운로드할 수 있습니다.
Linux 메인 라인 상태
Linux 메인 라인에서 사용 가능: 예
git.ti.com에서 구입 가능: 해당 없음
Linux 소스 파일
이 장치와 연계된 파일:
- sound/soc/codecs/pcm5102a.c
- (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TSSOP (PW) | 28 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.