TAD5212
- DAC performance:
- DAC to Line Out Dynamic Range: 119 dB
- DAC to HP Out Dynamic Range: 115 dB
- THD+N: –95 dB
- Head Phone/Line Out output voltage:
- Differential, 2-VRMS full-scale
- Single-ended, 1-VRMS full-scale
- DAC sample Rates (fs) = 8KHz to 768KHz
- Analog Input to Output By-pass
- Battery Protection
- Signal Distortion Limiter
- Thermal Foldback
- Low Latency Filter Selection
- Programmable HPF and Biquad Filters
- I2C & SPI Control Interface
- Audio Serial Interface
- Format: TDM, I2S or Left Justified
- Word Length: 16,20,24 or 32 Bits
- Programmable PLL for Flexible Clocking
- Low Power Modes
- TBD mW for Playback
- Single Supply Operation: 1.8V or 3.3V
- I/O Supply Operation: 1.2V or 1.8V or 3.3V
The TAD5212 is a high performanceStereo 2VRMS DAC. The TAD5212 supports both differential and Single Ended input and output. DAC Output can be configured for either Line Out or Head Phone Load. TAD5212 can drive upto TBD mW into a Headphone Load. The TAD5212 integrates programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency filter modes, and allows for sample rates up to 768 kHz. The TAD5212 supports Analog Input to Output Bypass option. Data from Analog-In and Digital-In can be mixed inside the device as well. The TAD5212 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C or SPI. These integrated high-performance features, along with a single supply operation, make TAD5212 an excellent choice for space-constrained audio applications.
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TAD5212 High-performance stereo audio DAC with 119 dB dynamic range datasheet | PDF | HTML | 2023/12/21 |
| Application note | Headset Detection for TAx52xx Family | PDF | HTML | 2024/04/11 | |
| Product overview | Audio ADC, DAC, and CODEC for Professional Audio and Music Applications | PDF | HTML | 2024/02/13 | |
| Application note | TAx5x1x Synchronous Sample Rate Conversion | PDF | HTML | 2023/12/19 | |
| Application note | DAC Swings and Common Mode Settings in AC Coupled and DC Coupled DAC | PDF | HTML | 2023/11/10 | |
| Application note | Clocking Configuration of Device and Flexible Clocking For TAx5x1x Family | PDF | HTML | 2023/11/08 | |
| Application note | Clock Error Configuration, Detection, and Modes Supported in TAx5x1x Family | PDF | HTML | 2023/11/07 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TAD5212EVM-K — TAD5212 평가 모듈
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| VQFN (RGE) | 24 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.