PTH08080W
- Up to 2.25-A Output Current at 85°C
- 4.5-V to 18-V Input Voltage Range
- Wide-Output Voltage Adjust (0.9 V to 5.5 V)
- Efficiencies Up To 93%
- On/Off Inhibit
- Undervoltage Lockout (UVLO)
- Output Overcurrent Protection (Nonlatching, Auto-Reset)
- Overtemperature Protection
- Ambient Temperature Range: –40°C to 85°C
- Surface-Mount Package
- Safety Agency Approvals: UL/CUL 60950, EN60950
The PTH08080W is a highly integrated, low-cost switching regulator module that delivers up to 2.25 A of output current. The PTH08080W sources output current at a much higher efficiency than a TO-220 linear regulator IC, thereby eliminating the need for a heat sink. Its small size (0.5 × 0.6 in) and flexible operation creates value for a variety of applications.
The input voltage range of the PTH08080W is from 4.5 V to 18 V, allowing operation from either a 5-V or 12-V input bus. Using state-of-the-art switched-mode power-conversion technology, the PTH08080W can step down to voltages as low as 0.9 V from a 5-V input bus, with less than 1 W of power dissipation. The output voltage can be adjusted to any voltage over the range, 0.9 V to 5.5 V, using a single external resistor. Operating features include an undervoltage lockout (UVLO), on/off inhibit, overcurrent protection, and overtemperature protection. Target applications include telecommunications, test and measurement applications, and high-end consumer products. This product is available in both through-hole and surface-mount package options, including tape and reel.
기술 자료
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | 2.25-A Wide-Input Adjustable Switching Regulator datasheet (Rev. D) | 2013/10/23 | |
Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 | ||
Technical article | Pile on to a charger – my EV needs power | PDF | HTML | 2016/12/20 | |
Application note | High-Temperatures Soldering Requirements for Plug-in Power, Surface-Mount Pdts (Rev. A) | 2009/08/13 | ||
Analog Design Journal | New power modules improve surface-mount manufacturability | 2005/07/14 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TIEVM-HV-1PH-DCAC — 전압 소스 및 그리드 연결 모드를 지원하는 단상 인버터 개발 키트
TIDM-1000 — C2000 MCU를 사용하는 Vienna 정류기 기반 3상 역률 보정 레퍼런스 디자인
TIDM-1001 — C2000™ MCU를 사용하는 2상 인터리브 LLC 공진 컨버터 레퍼런스 디자인
TIDM-HV-1PH-DCAC — 전압 소스 및 그리드 연결 모드를 지원하는 단상 인버터 레퍼런스 설계
TIDM-SOLAR-DCDC — MPPT(Maximum Power Point Tracking)가 지원되는 C2000™ MCU 태양광 DC/DC 컨버터
TIDM-02000 — C2000™ 실시간 MCU를 사용하는 피크 전류 모드 제어 위상 전환 풀 브리지 레퍼런스 설계
TIDM-SOLARUINV — MPPT 지원 그리드 연결 태양광 마이크로 인버터
TIDM-BIDIR-400-12 — 양방향 400V/12V DC/DC 컨버터 레퍼런스 디자인
TIDM-MINI-DC — 소형 AMI 네트워크의 인프라 비용 절감을 위한 데이터 콘센트레이터 레퍼런스 디자인
TIDM-RGB-LED — C2000™ MCU 기반의 멀티 스트링 RGB LED 조명 드라이버
TIDM-SMARTMETERBOARD3 — 스마트 전기 계량기 개발 플랫폼(SMB)
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
DIPMODULE (EUF) | 5 | Ultra Librarian |
DIPMODULE (EUG) | 5 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치