홈 무선 연결 기타 무선 제품
홈
무선 연결
기타 무선 제품

RF430F5978

활성

무선 주파수 코어 및 저주파 인터페이스가 포함된 RF430F59xx MSP430 SoC

지금 주문하기
데이터 시트
사용자 가이드

RF430F5978

활성
데이터 시트 지금 주문하기

제품 상세 정보

Frequency range 134.2 kHz, Sub-1-GHz Standard Proprietary (Sub-1 GHz and low frequency) Operating temperature range (°C) -40 to 85 Rating Catalog Transmission principle 2-FSK, 2-GFSK, ASK, HDX - FSK, MSK, OOK
Frequency range 134.2 kHz, Sub-1-GHz Standard Proprietary (Sub-1 GHz and low frequency) Operating temperature range (°C) -40 to 85 Rating Catalog Transmission principle 2-FSK, 2-GFSK, ASK, HDX - FSK, MSK, OOK
VQFN (RGC) 64 81 mm² 9 x 9
  • True System-In-Package Based On MSP430 Microcontroller With Sub-1-GHz Transceiver System-On-Chip (SoC) and Additional 3D LF Wake-up and Transponder Interface
  • Wide Supply Voltage Range: 3.6 V Down To 1.8 V
  • Ultra-Low Power Consumption
    • CPU Active Mode (AM): 160 µA/MHz
    • Standby Mode (LPM3 Real-Time Clock [RTC] Mode): 2.0 µA
    • Off Mode (LPM4 RAM Retention): 1.0 µA
    • Radio in Receive: 15 mA, 250 kbps, 915 MHz
  • MSP430 System and Peripherals
    • 16-Bit RISC Architecture, Extended Memory, up to 20-MHz System Clock
    • Wake up From Standby Mode in Less Than 6 µs
    • Flexible Power-Management System With SVS and Brownout
    • Unified Clock System With FLL
    • 16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers
    • 16-Bit Timer TA1, Timer_A With Three Capture/Compare Registers
    • Hardware RTC
    • Two Universal Serial Communication Interfaces (USCIs)
      • USCI_A0 Supports UART, IrDA, SPI
      • USCI_B0 Supports I2C, SPI
    • 12-Bit Analog-to-Digital Converter (ADC) With Internal Reference, Sample-and-Hold, and Autoscan Features
    • Comparator
    • 128-Bit AES Security Encryption and Decryption Coprocessor
    • 32-Bit Hardware Multiplier
    • 3-Channel Internal DMA
    • Serial Onboard Programming, No External Programming Voltage Needed
    • Embedded Emulation Module (EEM)
  • High-Performance Sub-1-GHz Radio Frequency (RF) Transceiver Core
    • Same as in CC1101
    • Wide Supply Voltage Range: 2 V to 3.6 V
    • Frequency Bands: 300 MHz to 348 MHz, 389 MHz to 464 MHz, and 779 MHz to 928 MHz
    • Programmable Data Rate From 0.6 kBaud to 500 kBaud
    • High Sensitivity (–117 dBm at 0.6 kBaud, –111 dBm at 1.2 kBaud, 315 MHz, 1% Packet Error Rate)
    • Excellent Receiver Selectivity and Blocking Performance
    • Programmable Output Power up to +12 dBm for All Supported Frequencies
    • 2-FSK, 2-GFSK, and MSK Supported as Well as OOK and Flexible ASK Shaping
    • Flexible Support for Packet-Oriented Systems: On-Chip Support for Sync Word Detection, Address Check, Flexible Packet Length, and Automatic CRC Handling
    • Support for Automatic Clear Channel Assessment (CCA) Before Transmitting (for Listen-Before-Talk Systems)
    • Digital RSSI Output
    • Suited for Systems Targeting Compliance With EN 300 220 (Europe) and FCC CFR Part 15 (US)
    • Suited for Systems Targeting Compliance With Wireless M-Bus Standard EN 13757-4:2005
    • Support for Asynchronous and Synchronous Serial Receive and Transmit Mode for Backward Compatibility With Existing Radio Communication Protocols
  • High-Performance Low-Frequency (LF) Interface
    • 3D Wake-up Receiver
      • Low Standby Current Consumption: 4.4 µA
      • Regular Sensitivity Mode: 3.7 mVpp → Approximate 3-m Wake Range
      • High Sensitivity Mode: 0.5 mVpp → Approximate 6-m Wake Range
      • Low Sensitivity Variation
      • Digital RSSI, 72 dB, 8-Bit Logarithmic
      • Two Independent Wake Patterns, 0-Bit to 24-Bit Length
      • Dedicated Sensitivity Levels for Both Wake Patterns
      • Integrated LF Bit Stream Data Decoding and Digital Data Output
    • AES-128 Hardware Encryption Coprocessor
    • Resonant Frequency: 134.2 kHz
      • Embedded Resonant Trimming for All Three Resonant Circuits
    • 3D Transponder Interface
      • Transponder Read Range up to 4 in (10 cm), Power Received From LF RF Field
      • Half-Duplex (HDX) Communication Protocol
      • Selectable Challenge/Response Length: 32/32, 64/64, or 96/64 Bit
      • Mutual Authentication For All Commands With 32-Bit Reader Signature
      • Burst Read Mode
      • Anticollision Encryption
    • EEPROM Memory Size of 2048 Bytes
      • Available User EEPROM is 1776 Bytes
      • Encryption Keys 4 × 128 Bits
      • Configurable Page Types for Selective Access Grant
      • All Pages Lockable (No Reprogramming Possible)
    • Switch Interface With up to Eight Inputs
  • True System-In-Package Based On MSP430 Microcontroller With Sub-1-GHz Transceiver System-On-Chip (SoC) and Additional 3D LF Wake-up and Transponder Interface
  • Wide Supply Voltage Range: 3.6 V Down To 1.8 V
  • Ultra-Low Power Consumption
    • CPU Active Mode (AM): 160 µA/MHz
    • Standby Mode (LPM3 Real-Time Clock [RTC] Mode): 2.0 µA
    • Off Mode (LPM4 RAM Retention): 1.0 µA
    • Radio in Receive: 15 mA, 250 kbps, 915 MHz
  • MSP430 System and Peripherals
    • 16-Bit RISC Architecture, Extended Memory, up to 20-MHz System Clock
    • Wake up From Standby Mode in Less Than 6 µs
    • Flexible Power-Management System With SVS and Brownout
    • Unified Clock System With FLL
    • 16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers
    • 16-Bit Timer TA1, Timer_A With Three Capture/Compare Registers
    • Hardware RTC
    • Two Universal Serial Communication Interfaces (USCIs)
      • USCI_A0 Supports UART, IrDA, SPI
      • USCI_B0 Supports I2C, SPI
    • 12-Bit Analog-to-Digital Converter (ADC) With Internal Reference, Sample-and-Hold, and Autoscan Features
    • Comparator
    • 128-Bit AES Security Encryption and Decryption Coprocessor
    • 32-Bit Hardware Multiplier
    • 3-Channel Internal DMA
    • Serial Onboard Programming, No External Programming Voltage Needed
    • Embedded Emulation Module (EEM)
  • High-Performance Sub-1-GHz Radio Frequency (RF) Transceiver Core
    • Same as in CC1101
    • Wide Supply Voltage Range: 2 V to 3.6 V
    • Frequency Bands: 300 MHz to 348 MHz, 389 MHz to 464 MHz, and 779 MHz to 928 MHz
    • Programmable Data Rate From 0.6 kBaud to 500 kBaud
    • High Sensitivity (–117 dBm at 0.6 kBaud, –111 dBm at 1.2 kBaud, 315 MHz, 1% Packet Error Rate)
    • Excellent Receiver Selectivity and Blocking Performance
    • Programmable Output Power up to +12 dBm for All Supported Frequencies
    • 2-FSK, 2-GFSK, and MSK Supported as Well as OOK and Flexible ASK Shaping
    • Flexible Support for Packet-Oriented Systems: On-Chip Support for Sync Word Detection, Address Check, Flexible Packet Length, and Automatic CRC Handling
    • Support for Automatic Clear Channel Assessment (CCA) Before Transmitting (for Listen-Before-Talk Systems)
    • Digital RSSI Output
    • Suited for Systems Targeting Compliance With EN 300 220 (Europe) and FCC CFR Part 15 (US)
    • Suited for Systems Targeting Compliance With Wireless M-Bus Standard EN 13757-4:2005
    • Support for Asynchronous and Synchronous Serial Receive and Transmit Mode for Backward Compatibility With Existing Radio Communication Protocols
  • High-Performance Low-Frequency (LF) Interface
    • 3D Wake-up Receiver
      • Low Standby Current Consumption: 4.4 µA
      • Regular Sensitivity Mode: 3.7 mVpp → Approximate 3-m Wake Range
      • High Sensitivity Mode: 0.5 mVpp → Approximate 6-m Wake Range
      • Low Sensitivity Variation
      • Digital RSSI, 72 dB, 8-Bit Logarithmic
      • Two Independent Wake Patterns, 0-Bit to 24-Bit Length
      • Dedicated Sensitivity Levels for Both Wake Patterns
      • Integrated LF Bit Stream Data Decoding and Digital Data Output
    • AES-128 Hardware Encryption Coprocessor
    • Resonant Frequency: 134.2 kHz
      • Embedded Resonant Trimming for All Three Resonant Circuits
    • 3D Transponder Interface
      • Transponder Read Range up to 4 in (10 cm), Power Received From LF RF Field
      • Half-Duplex (HDX) Communication Protocol
      • Selectable Challenge/Response Length: 32/32, 64/64, or 96/64 Bit
      • Mutual Authentication For All Commands With 32-Bit Reader Signature
      • Burst Read Mode
      • Anticollision Encryption
    • EEPROM Memory Size of 2048 Bytes
      • Available User EEPROM is 1776 Bytes
      • Encryption Keys 4 × 128 Bits
      • Configurable Page Types for Selective Access Grant
      • All Pages Lockable (No Reprogramming Possible)
    • Switch Interface With up to Eight Inputs

The TI RF430F5978 system-in-package adds a 3D low-frequency (LF) wake-up and transponder interface to the CC430 ultra-low-power microcontroller system-on-chip (SoC) with integrated sub-1-GHz RF transceiver. This architecture allows activation and deactivation of the device in a dedicated and well-defined area "on-demand" to achieve extended battery life for the whole system. The embedded LF transponder interface is always functional even without battery supply and offers the highest level of security through its 128-bit AES encryption for challenge/response and mutual authentication. The embedded LF transponder interface also adds 2KB of programmable EEPROM memory to the system.

The CC430 ultra-low-power microcontroller system-on-chip (SoC) combines the CC1101 sub-1-GHz RF transceiver with the powerful MSP430 16-bit RISC CPU. Sixteen-bit registers and constant generators contribute to maximum code efficiency. The RF430F5978 device features the MSP430 CPUXV2, 32KB of in-system programmable flash memory, 4KB of RAM, two 16-bit timers, a high-performance 12-bit ADC with six external inputs plus internal temperature and battery sensors, a comparator, two USCIs, a 128-bit AES security accelerator, a hardware multiplier, DMA, and an RTC module with alarm capabilities.

The RF430F5978 provides a tight integration between the microcontroller core, its peripherals, software, and the integrated sub-1-GHz RF transceiver and 3D LF transceiver for wake-up and transponder interface, making these solutions easy to use while improving performance.

For complete module descriptions, see the (SLAU378).

The TI RF430F5978 system-in-package adds a 3D low-frequency (LF) wake-up and transponder interface to the CC430 ultra-low-power microcontroller system-on-chip (SoC) with integrated sub-1-GHz RF transceiver. This architecture allows activation and deactivation of the device in a dedicated and well-defined area "on-demand" to achieve extended battery life for the whole system. The embedded LF transponder interface is always functional even without battery supply and offers the highest level of security through its 128-bit AES encryption for challenge/response and mutual authentication. The embedded LF transponder interface also adds 2KB of programmable EEPROM memory to the system.

The CC430 ultra-low-power microcontroller system-on-chip (SoC) combines the CC1101 sub-1-GHz RF transceiver with the powerful MSP430 16-bit RISC CPU. Sixteen-bit registers and constant generators contribute to maximum code efficiency. The RF430F5978 device features the MSP430 CPUXV2, 32KB of in-system programmable flash memory, 4KB of RAM, two 16-bit timers, a high-performance 12-bit ADC with six external inputs plus internal temperature and battery sensors, a comparator, two USCIs, a 128-bit AES security accelerator, a hardware multiplier, DMA, and an RTC module with alarm capabilities.

The RF430F5978 provides a tight integration between the microcontroller core, its peripherals, software, and the integrated sub-1-GHz RF transceiver and 3D LF transceiver for wake-up and transponder interface, making these solutions easy to use while improving performance.

For complete module descriptions, see the (SLAU378).
filter 기타 기타 무선 제품 찾기
다운로드 스크립트와 함께 비디오 보기 비디오
TI에서 제공하는 제한된 설계 지원

이 제품을 사용하는 기존 프로젝트에는 TI의 설계 지원이 제한되어 있습니다. 가능한 경우 이 페이지에서 관련 자료, 툴 및 소프트웨어를 확인할 수 있습니다. 이 제품을 사용하는 기존 설계에는 TI의 설계 지원이 제한되어 있습니다. TI E2E™ 지원 포럼에서 제한된 설계 지원을 요청하십시오.

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
3개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet RF430F5978 MSP430™ System-in-Package With Sub-1-GHz Transceiver and 3D LF Wake-up and Transponder Interface datasheet (Rev. A) PDF | HTML 2015/10/28
* User guide RF430F59xx Family User's Guide 2012/08/06
White paper Navigating your way through the RFID jungle 2014/02/20

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

디버그 프로브

LB-3P-TRACE32-WIRELESS — 무선 연결용 Lauterbach TRACE32® 디버그 시스템

Lauterbach의 TRACE32® 툴은 개발자가 다양한 종류의 TI 무선 연결 칩을 분석, 최적화 및 인증할 수 있도록 하는 첨단 하드웨어 및 소프트웨어 구성 요소 제품군입니다. 세계적으로 유명한 임베디드 시스템용 디버그 솔루션은 초기 사전 실리콘 개발부터 현장의 제품 인증 및 문제 해결에 이르기까지 다음을 포함하는 모든 개발 단계를 위한 완벽한 솔루션입니다.   전체 온칩 중단점 지원, 런타임 메모리 액세스, 플래시 프로그래밍 및 벤치마크 카운터. 모든 것이 스크립팅이 가능하므로 개발자는 동일한 테스트 시퀀스를 계속해서 (...)

발송: Lauterbach GmbH
View Options
하드웨어 프로그래밍 도구

MSP-FET — MSP MCU 프로그래머 및 디버거

MSP-FET는 디버그 프로브라고도 하는 강력한 에뮬레이션 개발 도구로, 사용자가 MSP 저전력 마이크로컨트롤러(MCU)에서 신속하게 개발을 시작할 수 있게 해줍니다.

JTAG 및 SBW 인터페이스 모두에서 프로그래밍과 실시간 디버깅을 지원합니다. 또한 MSP-FET는 컴퓨터 USB 인터페이스와 MSP UART 간의 백채널 UART 연결도 제공합니다. 이를 통해 MSP 프로그래머는 MSP와 컴퓨터에서 실행되는 단자 간에 직렬로 통신하는 편리한 방법을 사용할 수 있습니다. 또한 UART 및 I2C 통신 프로토콜을 통해 (...)

사용 설명서: PDF | HTML
TI.com에서 구매할 수 없음
소프트웨어 개발 키트(SDK)

MSP430-SDK — MSPWare for MSP430 Microcontrollers

MSP430-SDK is a collection of resources that help users to write effective code for MSP430 microcontrollers (MCUs). These resources support ALL MSP430 microcontrollers. As one user mentioned, “It’s essentially everything developers need to become MSP430 microcontroller experts!”

This collection of (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
찾아보기 다운로드 옵션
드라이버 또는 라이브러리

MSP-GRLIB — MSP Graphics Library

The MSP Graphics Library is a royalty-free set of graphics primitives for displaying images or creating graphical user interfaces (GUIs) on MSP430 and MSP432 microcontroller-based boards that use a graphical display. The graphics library consists of two functional layers: 1) the display driver (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
찾아보기 다운로드 옵션
드라이버 또는 라이브러리

MSP-IQMATHLIB — Fixed Point Math Library for MSP

The Texas Instruments® MSP IQmath and Qmath Libraries are a collection of highly optimized and high-precision mathematical functions for C programmers to seamlessly port a floating-point algorithm into fixed-point code on MSP430 and MSP432 devices. These routines are typically used in (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
다운로드 옵션
평가 모듈(EVM)용 GUI

SLRC001 — RF430F5978EVM Software

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
다운로드
IDE, 구성, 컴파일러 또는 디버거

IAR-KICKSTART — IAR Embedded Workbench

IAR Embedded Workbench는 선택한 대상 마이크로컨트롤러를 위한 임베디드 애플리케이션을 빌드하고 디버깅하는 데 사용되는 완전한 개발 툴 체인을 제공합니다. 포함된 IAR C/C++ 컴파일러는 애플리케이션에 매우 최적화된 코드를 생성합니다. C-SPY 디버거는 복잡한 코드 및 데이터 중단점을 지원하는 소스 및 분해 수준 디버깅이 가능한 완전 통합된 디버거입니다.

주요 구성 요소:

  • 프로젝트 관리 툴과 편집기가 포함된 통합 개발 환경입니다.
  • 고도로 최적화된 C 및 C++ 컴파일러.
  • 다중 파일 컴파일 지원.
  • 런타임 라이브러리.
  • 링커 (...)
발송: IAR Systems
사용 설명서: PDF
View Options
IDE, 구성, 컴파일러 또는 디버거

MSP430-GCC-OPENSOURCE — GCC - Open Source Compiler for MSP Microcontrollers

MSP430™ GCC open source package is a complete debugger and open source C/C++ compiler toolchain for building and debugging embedded applications based on MSP430 microcontrollers. This compiler supports all MSP430 devices without code size limitations. This compiler can be used standalone from the (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
다운로드 옵션
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
VQFN (RGC) 64 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상