SN54LS323
- Multiplexed Inputs/Outputs Provide Improved Bit Density
- Four Modes of Operation:
- Hold (Store)
- Shift Left
- Shift Right
- Load Data
- Operates with Outputs Enabled or at High Z
- 3-State Outputs Drive Bus Lines Directly
- Can Be Cascaded for N-Bit Word Lengths
- Typical Power Dissipation … 175 mW
- Exceptionally Stable Shift (Clock) Frequency … 25 MHz
- Applications:
- Stacked or Push-Down Registers,
- Buffer Storage, and
- Accumulator Registers
- SN54LS299 and SN74LS299 Are Similar But Have Direct Overriding Clear
These Low-Power Schottky eight-bit universal registers feature multiplexed inputs/outputs to achieve full eight-bit data handling in a single 20-pin package. Two function-select inputs and two output-control inputs can be used to choose the modes of operation listed in the function table. Synchronous parallel loading is accomplished by taking both function-select lines, S0 and S1, high. This places the three-state outputs in a high-impedance state, which permits data that is applied on the input/output lines to be clocked into the register. Reading out of the register can be accomplished while the outputs are enabled in any mode. The clear function is synchronous, and a low level at the clear input clears the register on the next low-to-high transition of the clock.
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | 8-Bit Universal Shift/Storage Registers datasheet | 1988/03/01 | |
| Application note | Power-Up Behavior of Clocked Devices (Rev. B) | PDF | HTML | 2022/12/15 | |
| Selection guide | Logic Guide (Rev. AB) | 2017/06/12 | ||
| Application note | Understanding and Interpreting Standard-Logic Data Sheets (Rev. C) | 2015/12/02 | ||
| User guide | LOGIC Pocket Data Book (Rev. B) | 2007/01/16 | ||
| Application note | Semiconductor Packing Material Electrostatic Discharge (ESD) Protection | 2004/07/08 | ||
| Application note | TI IBIS File Creation, Validation, and Distribution Processes | 2002/08/29 | ||
| Application note | Designing With Logic (Rev. C) | 1997/06/01 | ||
| Application note | Designing with the SN54/74LS123 (Rev. A) | 1997/03/01 | ||
| Application note | Input and Output Characteristics of Digital Integrated Circuits | 1996/10/01 | ||
| Application note | Live Insertion | 1996/10/01 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치