TAS5721
- Audio Input/Output
- 10 W x 2 into 8 Ω With PVDD = 24 V
- 8 W × 2 + 12 W × 1 into 8 Ω With PVDD = 24 V
- Supports 2.0, Single Device 2.1, and Mono Modes
- Supports 8-kHz to 48-kHz Sample Rate (LJ/RJ/I2S)
- Integrated DirectPath™ Headphone Amplifier and 2 VRMS Line Driver
- Audio/PWM Processing
- Independent Channel Volume Controls With 24-dB to Mute in 0.5 dB Steps
- Separate Dynamic Range Control for Satellite and Sub Channels
- 21 Programmable Biquads for Speaker EQ
- Programmable Two-Band Dynamic Range Control
- Support for 3D Effects
- General Features
- I2C™ Serial Control Interface Operational Without MCLK
- Configurable I2C Address (0x34 or 0x36)
- Automatic Sample Rate Detection
- Thermal and Short-Circuit Protection
- Wide PVDD Supply Range (4.5 V to 24 V)
The TAS5721 is an efficient, digital-input audio amplifier for driving 2.0 speaker systems configured as a bridge tied load (BTL), 2.1 systems with two satellite speakers and one subwoofer, or in PBTL systems driving a single speaker configured as a parallel bridge tied load (PBTL). One serial data input allows processing of up to two discrete audio channels and seamless integration to most digital audio processors and MPEG decoders. The device accepts a wide range of input data formats and sample rates. A fully programmable data path routes these channels to the internal speaker drivers.
The TAS5721 is a slave-only device, receiving all clocks from external sources. The TAS5721 operates with a PWM carrier frequency between a 384-kHz switching rate and a 288-KHz switching rate, depending on the input sample rate. Oversampling, combined with a fourth-order noise shaper, provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.
An integrated ground centered DirectPath™ combination headphone amplifier and 2VRMS line driver is integrated in the TAS5721.
추가 정보 요청
PurePath™ Console, TAS5721 GUI 및 기타 설계 리소스를 사용할 수 있습니다. 지금 요청
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | TAS5721 Digital Audio Power Amplifier With EQ, DRC, 2.1 Support, and Headphone/Line Driver datasheet (Rev. A) | PDF | HTML | 2016. 3. 31 | ||
| 애플리케이션 노트 | Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) | 2019. 8. 26 | ||||
| 애플리케이션 노트 | AN-1849 An Audio Amplifier Power Supply Design (Rev. C) | 2019. 6. 27 | ||||
| 애플리케이션 노트 | AN-1737 Managing EMI in Class D Audio Applications (Rev. A) | 2013. 5. 1 | ||||
| EVM User's guide | TAS5721-TAS5723EVM User's Guide | 2012. 6. 22 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TAS5721EVM — TAS5721 평가 모듈
The TAS5721EVM demonstrates the TAS5721xx / TAS5723xx / TAS5729xx devices from Texas Instruments. The TAS5721 / TAS5723 / TAS5729 combine a high-performance PWM processor with a class-D audio power amplifier. This EVM can be configured with two single-ended speakers with a BTL subwoofers (2.1) with (...)
TAS571XSW-LINUX — TAS571X용 Linux 드라이버
The Linux driver supports the TAS571x family of Digital input stereo amplifiers. The Linux driver supports communication through the I2C bus and interfaces with the Linux DAI (Digital Audio Interface) class.
Linux Mainline StatusAvailable in Linux Main line: Yes
Available through git.ti.com: N/A
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTSSOP (DCA) | 48 | Ultra Librarian |