TAS6682-Q1
- AEC-Q100 qualified for automotive applications
- Temperature grade 1: –40°C to +125°C, TA
- General operation
- 4.5V to 45V supply voltage, 50V load dump
- Support for 1.8V and 3.3V I/O
- I2C control with eight address options
- < 2W idle power loss at 14.4V, <8uA max VBAT+PVDD shutdown loss
- Integrated DSP processing
- Class-H supply voltage control
- Thermal monitoring and foldback
- Clip detection, PVDD monitoring and foldback
- Output current sensing by channel via I2S/TDM
- No need for external circuitry
- Real-time load diagnostics
- Monitor output conditions while playing audio
- Real-time temperature monitor for each channel
- Open load, shorted load detection
- DC and AC standby load diagnostics
- Audio inputs
- 1-2 channel I2S or 2-8 channel TDM input
- Input sample rates: 44.1, 48, 96, 192kHz
- Low latency < 100us at 96k sample rate
- Audio outputs
- 2-channel bridge-tied load (BTL), configurable 1-channel parallel BTL (PBTL)
- 384kHz to 2MHz configurable output switching frequency
- Up to 13A channel output current
- 400VA peak BTL output power
- 118W (45V, 8Ω, 1% THD+N, BTL)
- 218W (45V, 4Ω, 1% THD+N, BTL)
- Audio performance
- THD+N 0.03% (8Ω, 1W, 1kHz)
- 111dB SNR
- 37µV (14.4V), 80µV (45V) output noise
- Protection
- Output short protection
- DC offset, undervoltage, and overvoltage
- Configurable overtemperature warning and individual channel shutdown
- I2C temperature and supply voltage readout
- Easily meets CISPR25L5 EMC specification
- Advanced spread-spectrum
The TAS6682-Q1 is a two-channel, digital-input, high-voltage, Class-D audio amplifier that supports up to 45V supply voltage. Combined with up to 13A output current, this device delivers maximum output power and high fidelity audio in high and low impedance loads. The device provides two channels at 118W (45V, 8Ω, 1% THD+N, BTL) and 218W (45V, 4Ω, 1% THD+N, BTL).
The TAS6682-Q1 integrates DC and AC load diagnostics to determine the status of the connected loads before enabling the output stage. During audio playback, the status can be monitored through the output current sense and temperature of each channel which is available for each channel, and reports the measurement to a host processor through TDM with minimal delay. The device monitors the output load condition while playing audio using real-time load diagnostics which operate independently from the host and audio input.
To optimize system efficiency, the integrated DSP of the TAS6682-Q1 enables Class-H envelope tracking control, eliminating the need for complex tracking software and making local boost voltage control possible without an external microcontroller.
The TAS6682-Q1 device features an additional low-latency signal path for each channel, providing up to 70% faster signal processing at 48kHz and support an audio signal path latency of < 100us at 96kHz sample rate, which enables time-sensitive active noise cancellation (ANC), road noise cancellation (RNC) applications.
The TAS6682-Q1 is offered in a 64-pin QFP package with the exposed thermal pad up, pin-to-pin, and software compatible with TAS6684A-Q1.
전체 데이터 시트 및 기타 설계 리소스가 제공됩니다. 지금 요청
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TAS6682-Q1 45V, 13A, Digital Input 2-Channel Automotive Class-D Audio Amplifier With Current Sense and Real-time Load Diagnostics datasheet | PDF | HTML | 2026. 8. 20 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TAS6682-Q1-DESIGN — TAS6682-Q1 documents
TAS6682Q1EVM-DOC-CERT — TAS6682Q1EVM EU Declaration of Conformity (DoC)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTQFP (PHD) | 64 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.