전원 관리 LED 드라이버 LED 디스플레이 드라이버

TLC6948

활성

48 멀티플렉싱을 사용한 16채널, 16비트 ES-PWM 정전류 LED 드라이버

제품 상세 정보

Features Fault Detection, LED Open Detection, PWM LED Driver, Pre-Charge FET, SRAM, Thermal shutdown Analog dimming steps 128 Data transfer rate (typ) (MHz) 33 Ch to ch accuracy (typ) (±%) 1.5 Rating Catalog Operating temperature range (°C) -40 to 85
Features Fault Detection, LED Open Detection, PWM LED Driver, Pre-Charge FET, SRAM, Thermal shutdown Analog dimming steps 128 Data transfer rate (typ) (MHz) 33 Ch to ch accuracy (typ) (±%) 1.5 Rating Catalog Operating temperature range (°C) -40 to 85
SSOP (DBQ) 24 51.9 mm² 8.65 x 6 VQFN (RGE) 24 16 mm² 4 x 4
  • Power Supply Voltage Ranges
    • VCC Voltage Range: 3 V to 5.5 V
    • VLED Voltage Range: Up to VCC + 0.3 V
  • 16 Constant-Current-Sink Channels
    • 0.3 mA to 25 mA (3 V ≤ VCC ≤ 5.5 V)
    • Channel Current Deviation: ±1% (typical)
    • Device Current Deviation: ±1% (typical)
    • Low Knee Voltage: 0.3 V (typical) at 10 mA
  • 7-Bit (128 Steps) Global Brightness Control (BC)
  • 16-Bit (65,536 Steps) Enhanced Spectrum PWM Grayscale Control
  • Built-In Memory Supports 32 Multiplexing for TLC6946 and 48 Multiplexing for TLC6948
  • LED Display Performance Enhancement
    • Low-Grayscale Uniformity Improvement
    • Low-Grayscale Coupling Issue Elimination
    • Ghosting Removal and Caterpillar Elimination
  • High-Speed Serial-Data Interface
    • Data-Shift Clock: 33 MHz (maximum)
    • Grayscale Control Clock: 33 MHz (maximum)
    • Supports Dual-Edge Grayscale Control
  • Diagnostics and Protection
    • LED-Open Detection (LOD)
    • IREF Resistor Short Protection (ISP)
    • Thermal Shutdown (TSD)
  • Smart Power-Save Mode
  • Power Supply Voltage Ranges
    • VCC Voltage Range: 3 V to 5.5 V
    • VLED Voltage Range: Up to VCC + 0.3 V
  • 16 Constant-Current-Sink Channels
    • 0.3 mA to 25 mA (3 V ≤ VCC ≤ 5.5 V)
    • Channel Current Deviation: ±1% (typical)
    • Device Current Deviation: ±1% (typical)
    • Low Knee Voltage: 0.3 V (typical) at 10 mA
  • 7-Bit (128 Steps) Global Brightness Control (BC)
  • 16-Bit (65,536 Steps) Enhanced Spectrum PWM Grayscale Control
  • Built-In Memory Supports 32 Multiplexing for TLC6946 and 48 Multiplexing for TLC6948
  • LED Display Performance Enhancement
    • Low-Grayscale Uniformity Improvement
    • Low-Grayscale Coupling Issue Elimination
    • Ghosting Removal and Caterpillar Elimination
  • High-Speed Serial-Data Interface
    • Data-Shift Clock: 33 MHz (maximum)
    • Grayscale Control Clock: 33 MHz (maximum)
    • Supports Dual-Edge Grayscale Control
  • Diagnostics and Protection
    • LED-Open Detection (LOD)
    • IREF Resistor Short Protection (ISP)
    • Thermal Shutdown (TSD)
  • Smart Power-Save Mode

In high-density, fine-pitch LED panel applications, the performance demand for multi-channel LED drivers is increasing to achieve high multiplexing, high PWM resolution, and high refresh rates. To meet strict display quality requirements, the LED drivers must have the ability to solve various issues in different LED-matrix application scenarios.

The TLC694x device is a 16-channel, constant-current-sink LED driver. Each channel has an individually adjustable 65,536 steps of PWM grayscale control. The maximum constant-current value of all 16 channels is set by a single external resistor with 128 steps of global brightness control from 0.3 mA to 25 mA.

The TLC694x device integrates enhanced circuits to solve the various display issues in fine-pitch LED display applications: the low-grayscale uniformity issue, coupling issue, ghosting issue, and caterpillar issue.

The TLC694x device features an LED-open detection function, and the error detection results can be read via a serial data interface port. Thermal shutdown and IREF resistor short protection ensure a higher system reliability. The TLC694x device also has an smart power-save mode that sets the total current consumption to 1 mA (typical) when all outputs are off.

In high-density, fine-pitch LED panel applications, the performance demand for multi-channel LED drivers is increasing to achieve high multiplexing, high PWM resolution, and high refresh rates. To meet strict display quality requirements, the LED drivers must have the ability to solve various issues in different LED-matrix application scenarios.

The TLC694x device is a 16-channel, constant-current-sink LED driver. Each channel has an individually adjustable 65,536 steps of PWM grayscale control. The maximum constant-current value of all 16 channels is set by a single external resistor with 128 steps of global brightness control from 0.3 mA to 25 mA.

The TLC694x device integrates enhanced circuits to solve the various display issues in fine-pitch LED display applications: the low-grayscale uniformity issue, coupling issue, ghosting issue, and caterpillar issue.

The TLC694x device features an LED-open detection function, and the error detection results can be read via a serial data interface port. Thermal shutdown and IREF resistor short protection ensure a higher system reliability. The TLC694x device also has an smart power-save mode that sets the total current consumption to 1 mA (typical) when all outputs are off.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기4
유형 직함 날짜
* Data sheet TLC694x 16-Channel 32-, 48-Multiplexing 16-Bit ES-PWM Constant-Current LED Driver datasheet (Rev. A) PDF | HTML 2019/01/07
White paper Common LED Functions and LED Driver Design Considerations 2020/09/21
User guide Using the TLC694x VQFN Evaluation Module 2019/02/15
EVM User's guide TLC6946 Evaluation Module User's Guide 2018/05/24

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

BOOSTXL-TLC6946EVM — TLC6946 16채널 32-멀티플렉싱 16비트 ES-PWM 정전류 LED 드라이버 평가 모듈

The TLC6946 evaluation module (BOOSTXL-TLC6946EVM) is a reference for engineering demonstration and evaluation of the TLC6946 16-channel 32-multiplexing 16-bit ES-PWM constant-current LED driver. The BOOSTXL-TLC6946EVM uses three TLC6946 devices to drive 16 RGB LEDs, each device controlling one (...)
사용 설명서: PDF
TI.com에서 구매할 수 없습니다
평가 보드

BOOSTXL-TLC6948EVM — TLC694x 16채널 32-, 48-멀티플렉싱 16비트 ES-PWM 정전류 LED 드라이버 평가 모듈

The TLC694x evaluation module (BOOSTXL-TLC6948EVM) is a reference for engineering demonstration and evaluation of the TLC694x 16-channel 32-,  48-multiplexing 16-bit ES-PWM constant-current LED driver with QFN package. The BOOSTXL-TLC6948EVM uses three TLC694x VQFN package devices to drive 16 (...)
사용 설명서: PDF
TI.com에서 구매할 수 없습니다
시뮬레이션 모델

TLC6948 Unencrypted PSpice Transient Model Package (Rev. B)

SLVMCX9B.ZIP (146 KB) - PSpice Model
시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
패키지 다운로드
SSOP (DBQ) 24 옵션 보기
VQFN (RGE) 24 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상