이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TLV320ADC3120 활성 스테레오 채널 768kHz Burr-Brown™ 오디오 아날로그-디지털 컨버터(ADC), 106dB SNR 지원 Improved SNR

제품 상세 정보

Number of ADC channels 2 Analog inputs 2 Digital audio interface DSP, I2S, L, PCM, R, TDM Control interface I2C Sampling rate (max) (kHz) 96 ADC SNR (typ) (dB) 92 Rating Catalog Analog outputs 4 Operating temperature range (°C) -40 to 85
Number of ADC channels 2 Analog inputs 2 Digital audio interface DSP, I2S, L, PCM, R, TDM Control interface I2C Sampling rate (max) (kHz) 96 ADC SNR (typ) (dB) 92 Rating Catalog Analog outputs 4 Operating temperature range (°C) -40 to 85
VQFN (RGE) 24 16 mm² 4 x 4
  • Stereo Audio ADC:
    • 92-dBA Signal-to-Noise Ratio
    • Supports ADC Sample Rates From 8 kHz to 96 kHz
  • Flexible Digital Filtering With Programmable Coefficients and Built-In Processing Blocks:
    • Low-Latency IIR Filters for Voice
    • Linear Phase FIR Filters for Audio
    • Up to 5 Additional Programmable Bi-Quad Filters
    • Programmable High-Pass Filter
  • Four Audio Inputs With Configurable Automatic Gain Control (AGC):
    • Programmable in Single-Ended or Fully Differential Configurations
    • Optionally Tri-Stated for Easy Interoperability With Other Audio Devices
  • Low Power Consumption and Extensive Modular Power Control:
    • 6-mW Mono Record, 8-kHz
    • 11-mW Stereo Record, 8-kHz
    • 10-mW Mono Record, 48-kHz
    • 17-mW Stereo Record, 48-kHz
  • Programmable Microphone Bias
  • Programmable PLL for Clock Generation
  • I2C Control Bus
  • Audio Serial Data Bus Supports I2S, Left- and Right-Justified, DSP, PCM, and TDM Modes
  • Power Supplies:
    • Analog: 2.7 V to 3.6 V
    • Digital: Core: 1.65 V to 1.95 V,
      I/O: 1.1 V–3.6 V
  • Package: 4-mm × 4-mm, 24-Pin RGE (VQFN)
  • Stereo Audio ADC:
    • 92-dBA Signal-to-Noise Ratio
    • Supports ADC Sample Rates From 8 kHz to 96 kHz
  • Flexible Digital Filtering With Programmable Coefficients and Built-In Processing Blocks:
    • Low-Latency IIR Filters for Voice
    • Linear Phase FIR Filters for Audio
    • Up to 5 Additional Programmable Bi-Quad Filters
    • Programmable High-Pass Filter
  • Four Audio Inputs With Configurable Automatic Gain Control (AGC):
    • Programmable in Single-Ended or Fully Differential Configurations
    • Optionally Tri-Stated for Easy Interoperability With Other Audio Devices
  • Low Power Consumption and Extensive Modular Power Control:
    • 6-mW Mono Record, 8-kHz
    • 11-mW Stereo Record, 8-kHz
    • 10-mW Mono Record, 48-kHz
    • 17-mW Stereo Record, 48-kHz
  • Programmable Microphone Bias
  • Programmable PLL for Clock Generation
  • I2C Control Bus
  • Audio Serial Data Bus Supports I2S, Left- and Right-Justified, DSP, PCM, and TDM Modes
  • Power Supplies:
    • Analog: 2.7 V to 3.6 V
    • Digital: Core: 1.65 V to 1.95 V,
      I/O: 1.1 V–3.6 V
  • Package: 4-mm × 4-mm, 24-Pin RGE (VQFN)

The TLV320ADC3100 is a low-power, stereo audio analog-to-digital converter (ADC) supporting sampling rates from 8 kHz to 96 kHz with an integrated programmable-gain amplifier (PGA) providing up to 40-dB analog gain or automatic gain control (AGC). Front-end input coarse attenuation of 0 dB, –6 dB, or off, is also provided. The inputs are programmable in a combination of single-ended or fully differential configurations. Extensive register-based power control is available via an I2C interface, enabling mono or stereo recording. The TLV320ADC3100 integrates programable channel gain, digital volume control, a phase-locked loop (PLL), programmable biquad filters, and low latency filter modes. Pre-programmed built-in processing blocks (PRBs) that can be chosen based on the specific application needs, allows optimization of performance and power. Low power consumption coupled with its flexibility make the TLV320ADC3100 ideal for battery-powered portable equipment. The TLV320ADC3100 is form-factor and software compatible with the TLV320ADC3101.

The AGC programs to a wide range of attack (7 ms to 1.4 s) and decay (50 ms to 22.4 s) times. A programmable noise-gate function is included to avoid noise pumping. Low-latency interrupt identification register (IIR) filters optimized for voice and telephony are available, as well as linear-phase finite impulse response (FIR) filters optimized for audio. Programmable IIR filters are also available and can be used for sound equalization, or to remove noise components. The audio serial bus can be programmed to support I2S, left-justified, right-justified, digital signal processor (DSP), pulse code modulation (PCM), and time-division multiplexing (TDM) modes. The audio bus can be operated in either master or slave mode.

A programmable integrated PLL is included for flexible clock generation and provides support for all standard audio rates from a wide range of available MCLKs, varying from 512 kHz to 50 MHz, including the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.

The TLV320ADC3100 is a low-power, stereo audio analog-to-digital converter (ADC) supporting sampling rates from 8 kHz to 96 kHz with an integrated programmable-gain amplifier (PGA) providing up to 40-dB analog gain or automatic gain control (AGC). Front-end input coarse attenuation of 0 dB, –6 dB, or off, is also provided. The inputs are programmable in a combination of single-ended or fully differential configurations. Extensive register-based power control is available via an I2C interface, enabling mono or stereo recording. The TLV320ADC3100 integrates programable channel gain, digital volume control, a phase-locked loop (PLL), programmable biquad filters, and low latency filter modes. Pre-programmed built-in processing blocks (PRBs) that can be chosen based on the specific application needs, allows optimization of performance and power. Low power consumption coupled with its flexibility make the TLV320ADC3100 ideal for battery-powered portable equipment. The TLV320ADC3100 is form-factor and software compatible with the TLV320ADC3101.

The AGC programs to a wide range of attack (7 ms to 1.4 s) and decay (50 ms to 22.4 s) times. A programmable noise-gate function is included to avoid noise pumping. Low-latency interrupt identification register (IIR) filters optimized for voice and telephony are available, as well as linear-phase finite impulse response (FIR) filters optimized for audio. Programmable IIR filters are also available and can be used for sound equalization, or to remove noise components. The audio serial bus can be programmed to support I2S, left-justified, right-justified, digital signal processor (DSP), pulse code modulation (PCM), and time-division multiplexing (TDM) modes. The audio bus can be operated in either master or slave mode.

A programmable integrated PLL is included for flexible clock generation and provides support for all standard audio rates from a wide range of available MCLKs, varying from 512 kHz to 50 MHz, including the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기2
유형 직함 날짜
* Data sheet TLV320ADC3100 Low-Power Stereo ADC for Voice-Activated Systems and Portable Audio datasheet PDF | HTML 2018/03/28
EVM User's guide TLV320ADC3101EVM-K User's Guide (Rev. A) 2012/09/24

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TLV320ADC3101EVM-K — TLV320ADC3101 평가 모듈 및 USB 마더보드

The TLV320ADC3101EVM is in the Texas Instruments (TI) modular EVM form factor, which allows direct evaluation of the device performance and operating characteristics and eases software development and system prototyping. The TLV320ADC3101EVM-K is a complete evaluation/demonstration kit, which (...)

사용 설명서: PDF
TI.com에서 구매할 수 없습니다
드라이버 또는 라이브러리

TLV320ADC31XX-DRIVERS — TLV320ADC31XX ADC 제품군 Linux 드라이버 지원

These Linux drivers support our low-power audio CODECs in the TLV320AIC2x device family, and include both .c and .h files. The "Go to third party" buttons below will allow you to downlod the appropriate drivers from git.kernal.org.

Linux main line status
Available in Linux main line: Yes
Available (...)
지원 소프트웨어

SBAC293 TLV320ADC310x C Source Headers

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
오디오 ADC
TLV320ADC3100 음성 활성 시스템 및 휴대형 오디오를 위한 저전력 스테레오 아날로그-디지털 컨버터(ADC) TLV320ADC3101 디지털 마이크 지원 및 miniDSP를 지원하는 92dB SNR 저전력 스테레오 ADC
계산 툴

SLAR163 Audio CODEC/ADC PLL Calculator

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
오디오 코덱
TLV320AIC3007 통합 클래스-D 증폭기를 지원하는 저전력 스테레오 코덱 TLV320AIC3100 오디오 처리를 지원하는 저전력 오디오 코덱 및 모노 클래스-D 증폭기 TLV320AIC3101 6입력, 6출력, 스피커/HP 증폭기 및 향상된 디지털 효과를 지원하는 저전력 스테레오 코덱 TLV320AIC3104 저전력 스테레오 코덱(6 입력, 6 출력, HP 증폭기 및 고급 디지털 효과 포함) TLV320AIC3104-Q1 6개의 오디오 입력 핀과 6개의 오디오 출력 드라이버를 지원하는 차량용 저전력 스테레오 오디오 코덱 TLV320AIC3105 저전력 스테레오 코덱(6 입력, 6 출력, HP 증폭기 및 고급 디지털 효과 포함) TLV320AIC3106 저전력 스테레오 코덱, 입력 10개, 출력 7개, 헤드폰 증폭기 및 고급 디지털 효과 TLV320AIC3106-Q1 차량용 저전력 스테레오 코덱 - 헤드폰 증폭기와 고급 디지털 효과 지원 TLV320AIC3107 통합 모노 클래스-D 증폭기를 지원하는 저전력 스테레오 코덱 TLV320AIC3109-Q1 오토모티브 저전력 96kHz 모노 오디오 코덱 TLV320AIC3110 1.3W 스테레오 클래스-D 스피커 증폭기를 지원하는 저전력 오디오 코덱 TLV320AIC3111 임베디드 miniDSP 및 스테레오 클래스-D 스피커 증폭기를 지원하는 저전력 오디오 코덱 TLV320AIC3120 miniDSP 및 2.5W 모노 클래스-D 스피커 증폭기를 지원하는 저전력 오디오 코덱 TLV320AIC3204 PowerTune™ 기술을 지원하는 초저전력 스테레오 오디오 코덱 TLV320AIC3206 DirectPath™ HP 증폭기를 지원하는 초저전력 스테레오 코덱 TLV320AIC3253 miniDSP 및 스테레오 디지털 마이크 입력을 지원하는 초저전력 스테레오 오디오 코덱 TLV320AIC3254 프로그래머블 miniDSP를 사용한 초저전력 스테레오 오디오 코덱 TLV320AIC3254-Q1 miniDSP 및 PowerTune™ 기술을 지원하는 오토모티브 초저전력 스테레오 오디오 코덱 TLV320AIC3256 miniDSP 및 DirectPath™ HP 증폭기를 지원하는 초저전력 스테레오 코덱 TLV320AIC34 저전력 4채널 코덱
오디오 ADC
TLV320ADC3001 92dB SNR 저전력 스테레오 ADC(ADC3001) TLV320ADC3100 음성 활성 시스템 및 휴대형 오디오를 위한 저전력 스테레오 아날로그-디지털 컨버터(ADC) TLV320ADC3101 디지털 마이크 지원 및 miniDSP를 지원하는 92dB SNR 저전력 스테레오 ADC
시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
패키지 다운로드
VQFN (RGE) 24 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상