제품 상세 정보

Number of ADC channels 2 Number of DAC channels 2 Digital audio interface DSP, I2S, L&R, PCM, TDM Analog inputs 8 Analog outputs 7 Sampling rate (max) (kHz) 192 Rating Catalog Features MiniDSP, Mono Class-D amplifier, Stereo headphone amplifier ADC SNR (typ) (dB) 95 DAC SNR (typ) (dB) 105 Operating temperature range (°C) -40 to 85
Number of ADC channels 2 Number of DAC channels 2 Digital audio interface DSP, I2S, L&R, PCM, TDM Analog inputs 8 Analog outputs 7 Sampling rate (max) (kHz) 192 Rating Catalog Features MiniDSP, Mono Class-D amplifier, Stereo headphone amplifier ADC SNR (typ) (dB) 95 DAC SNR (typ) (dB) 105 Operating temperature range (°C) -40 to 85
VQFN (RGC) 64 81 mm² 9 x 9
  • 105dB SNR for Stereo Audio DAC to Differential
    Lineout
  • 95dB SNR for Stereo Line Input to Audio ADC
  • 8-192kHz Playback and Record
  • 24 mW output power from DirectPathTM
    Headphone Driver
  • 121 mW output power from Differential Receiver
    Output Driver
  • Class-D Speaker Driver with
    • 1.45 W (8Ω, 5V, 10% THDN)
    • 1.15 W (8Ω, 5V, 1% THDN)
  • Differential or Single-Ended Stereo Line
    Outputs
  • Eight Single-Ended or 4 Fully-Differential Analog
    Inputs
  • Analog Microphone Inputs, and Up to 4 Simultaneous
    Digital Microphone Channels
  • Extensive Signal Processing Options
  • Fully-programmable Enhanced miniDSP
  • Three Independent Digital Audio Serial Interfaces
    with Separate I/O Power Voltages
    • TDM and mono PCM support on all Audio Serial
      Interfaces (ASI)
    • 8-channel Input and Output on ASI 1
  • Programmable PLL, plus Low-Frequency Clocking
  • Programmable 12-Bit SAR ADC
  • SPI and I2C Control Interfaces
  • 105dB SNR for Stereo Audio DAC to Differential
    Lineout
  • 95dB SNR for Stereo Line Input to Audio ADC
  • 8-192kHz Playback and Record
  • 24 mW output power from DirectPathTM
    Headphone Driver
  • 121 mW output power from Differential Receiver
    Output Driver
  • Class-D Speaker Driver with
    • 1.45 W (8Ω, 5V, 10% THDN)
    • 1.15 W (8Ω, 5V, 1% THDN)
  • Differential or Single-Ended Stereo Line
    Outputs
  • Eight Single-Ended or 4 Fully-Differential Analog
    Inputs
  • Analog Microphone Inputs, and Up to 4 Simultaneous
    Digital Microphone Channels
  • Extensive Signal Processing Options
  • Fully-programmable Enhanced miniDSP
  • Three Independent Digital Audio Serial Interfaces
    with Separate I/O Power Voltages
    • TDM and mono PCM support on all Audio Serial
      Interfaces (ASI)
    • 8-channel Input and Output on ASI 1
  • Programmable PLL, plus Low-Frequency Clocking
  • Programmable 12-Bit SAR ADC
  • SPI and I2C Control Interfaces

The TLV320AIC3268 (AIC3268) provides users with an integrated method to implement an audio system with multiple digital and analog audio streams as sources, and multiple output devices such as high-powered audio amplifiers. The integrated miniDSP allows users to differentiate their products by enabling customization of signal processing on the audio streams. The low power consumption of this device is ideal for systems that are battery operated or that operate in a constrained power consumption environment.

The AIC3268 is an integrated, low-power, low-voltage stereo audio codec and also features four digital microphone inputs, plus programmable outputs, predefined and parameterizable signal processing blocks and an integrated PLL. Extensive register-based control of power, input and output channel configuration, gains, effects, terminal-multiplexing and clocks are included, allowing the device to be precisely targeted to its application.

The AIC3268 supports a range of applications from mono 8kHz voice to stereo 192kHz music, making it ideal for wide variety of low power battery-operated and consumer audio applications.

The TLV320AIC3268 (AIC3268) provides users with an integrated method to implement an audio system with multiple digital and analog audio streams as sources, and multiple output devices such as high-powered audio amplifiers. The integrated miniDSP allows users to differentiate their products by enabling customization of signal processing on the audio streams. The low power consumption of this device is ideal for systems that are battery operated or that operate in a constrained power consumption environment.

The AIC3268 is an integrated, low-power, low-voltage stereo audio codec and also features four digital microphone inputs, plus programmable outputs, predefined and parameterizable signal processing blocks and an integrated PLL. Extensive register-based control of power, input and output channel configuration, gains, effects, terminal-multiplexing and clocks are included, allowing the device to be precisely targeted to its application.

The AIC3268 supports a range of applications from mono 8kHz voice to stereo 192kHz music, making it ideal for wide variety of low power battery-operated and consumer audio applications.

다운로드 스크립트와 함께 비디오 보기 동영상
Information

추가 정보 요청

PurePath™ Console 2, TLV320AIC3268 GUI 및 기타 설계 리소스를 사용할 수 있습니다. 지금 요청

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TLV320AIC3263 활성 miniDSP, 클래스-D 스피커, DirectPath 헤드폰, 4개의 디지털 마이크를 지원하는 저전력 스테레오 오디오 코덱 Available in BGA package

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기11
유형 직함 날짜
* Data sheet TLV320AIC3268 Ultra Low Power Stereo Audio Codec datasheet (Rev. A) 2014/02/26
Application note Out-of-Band Noise Measurement Issues for Audio Devices (Rev. A) 2019/12/31
Application note Audio Serial Interface Configurations for Audio Codecs (Rev. A) 2019/06/27
Application note Common Noise Issues in Audio Codecs 2017/07/21
User guide TLV320AIC3268EVM-U Evaluation Module (Rev. A) 2014/02/25
Application note Using the MSP430 Launchpad as a Standalone I2C Host for Audio Products (Rev. A) 2013/10/28
Application note Audio Serial Interface Configurations for Audio Codecs 2010/09/22
Application note Solving Enumeration Errors in USB Audio DAC and CODEC Designs 2009/10/30
Application note Configuring I2S to Generate BCLK from Codec Devices & WCLK from McBSP Port 2009/07/08
Application note Using TLV320AIC3x Digital Audio Data Serial Interface w/TDM Support 2006/07/05
Application note How to Set the TSC/AIC EVM to Record & Playback Audio or Other Sound Through PC 2004/12/14

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

애플리케이션 소프트웨어 및 프레임워크

PUREPATHCONSOLE — 오디오 시스템 설계 및 개발을 위한 PurePath™ 콘솔 그래픽 개발 제품군

PurePath™ Console is a highly integrated and easy-to-use audio development suite designed specifically to simplify the evaluation, configuration and debug process associated with the development of audio products. Watch how easy it is to use the PurePath™ Console 3 software.
PurePath Console’s (...)
드라이버 또는 라이브러리

TLV320AIC32XX-DRIVERS — TLV320AIC32XX 코덱 제품군 Linux 드라이버 지원

These Linux drivers support our low-power audio CODECs in the TLV320AIC32xx device family, and include both .c and .h files. The "Go to third party" buttons below will allow you to downlod the appropriate drivers from git.kernal.org.

Linux main line status

Available in Linux main line: Yes
Available (...)

지원 소프트웨어

SLAC654 TLV320AIC3268 Scripts

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
오디오 코덱
TLV320AIC3268 TLV320AIC3268 초저전력 스테레오 오디오 코덱
시뮬레이션 모델

TLV320AIC3268 IBIS Model

SLAM201.ZIP (190 KB) - IBIS Model
시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
레퍼런스 디자인

TIDA-00403 — TLV320AIC3268 miniDSP 코덱을 사용한 초음파 거리 측정 레퍼런스 디자인

The TIDA-00403 reference design uses off-the-shelf EVMs for ultrasonic distance measurement solutions using algorithms within the TLV320AIC3268 miniDSP. In conjunction with TI’s PurePath Studio design suite, a robust and user configurable ultrasonic distance measurement system can be designed (...)
Design guide: PDF
회로도: PDF
패키지 다운로드
VQFN (RGC) 64 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상