The TLV320AIC34 device is a low-power four-channel audio codec with four-channel headphone amplifier, as well as multiple inputs and outputs programmable in single-ended or fully differential configurations. Extensive register-based power control is included, enabling four-channel 48-kHz DAC playback as low as 15 mW from a 3.3-V analog supply, making it ideal for portable battery-powered audio and telephony applications.
The record path of the TLV320AIC34 contains integrated microphone bias, digitally controlled four-channel microphone preamplifier, and automatic gain control (AGC), with mix or mux capability among the multiple analog inputs. Programmable filters are available during record which can remove audible noise that can occur during optical zooming in digital cameras. The playback path includes mix or mux capability from the four-channel DAC and selected inputs, through programmable volume controls, to the various outputs.
The TLV320AIC34 contains eight high-power output drivers as well as six line-level output drivers. The high-power output drivers are capable of driving a variety of load configurations, including up to eight channels of single-ended 16-Ω headphones using ac-coupling capacitors, or four channels in a capless output configuration. In addition, for codec A, pairs of drivers can be used to drive mono or stereo 8-Ω speakers directly in a BTL configuration at 500 mW per channel.
The four-channel audio DAC supports sampling rates from 8 kHz to 96 kHz and includes programmable digital filtering in each path for 3D, bass, treble, midrange effects, speaker equalization, and de-emphasis for 32-kHz, 44.1-kHz, and 48-kHz rates. The four-channel audio ADC supports sampling rates from 8 kHz to 96 kHz and is preceded by programmable gain amplifiers providing up to 59.5-dB analog gain for low-level microphone inputs. The TLV320AIC34 provides an extremely high range of programmability for both attack (8 to 1,408 ms) and for decay (0.05 to 22.4 seconds). This extended AGC range allows the AGC to be tuned for many types of applications.
For battery saving applications where neither analog nor digital signal processing is required, the device can be put in a special analog signal pass-through mode. This mode significantly reduces power consumption, as most of the device is powered down during this pass through operation.
The serial control bus supports normal-speed and fast I2C protocols, whereas the dual serial audio data busses are programmable for I2S, left- or right-justified, DSP, PCM, or TDM mode. Two highly programmable PLLs are included for flexible clock generation and support for all standard audio rates from a wide range of available MCLK_x frequencies, varying from 512 kHz to 50 MHz, with special attention paid to the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.
The TLV320AIC34 operates from an analog supply of 2.7 V to 3.6 V, a digital core supply of 1.65 V to 1.95 V, and a digital I/O supply of 1.1 V to 3.6 V. The device is available in a 6-mm × 6-mm, 87-ball NFBGA package.
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | TLV320AIC34 Four-Channel, Low-Power Audio Codec for Portable Audio and Telephony datasheet (Rev. B) | PDF | HTML | 2016/11/29 |
| User guide | Quick-Start Guide for TLV320AIC310xEVM Control (Rev. A) | PDF | HTML | 2022/03/15 | |
| Application note | Out-of-Band Noise Measurement Issues for Audio Devices (Rev. A) | 2019/12/31 | ||
| Application note | Audio Serial Interface Configurations for Audio Codecs (Rev. A) | 2019/06/27 | ||
| Application note | Common Noise Issues in Audio Codecs | 2017/07/21 | ||
| Application note | Using the MSP430 Launchpad as a Standalone I2C Host for Audio Products (Rev. A) | 2013/10/28 | ||
| Application note | Audio Serial Interface Configurations for Audio Codecs | 2010/09/22 | ||
| Application note | Solving Enumeration Errors in USB Audio DAC and CODEC Designs | 2009/10/30 | ||
| Application note | Configuring I2S to Generate BCLK from Codec Devices & WCLK from McBSP Port | 2009/07/08 | ||
| Product overview | TLV320AIC33/3106/34 Stereo Audio Converters | 2007/06/12 |
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TLV320AIC34 평가 모듈(EVM)은 모듈식 EVM 폼 팩터로, 장치 성능과 작동 특성을 직접 평가할 수 있고 소프트웨어 개발 및 시스템 프로토타입 제작을 용이하게 합니다. 이 EVM은 5-6K 인터페이스 평가 모듈(5-6KINTERFACE) 및 TI의 모듈식 EVM 형식을 지원하는 추가 타사 보드와 호환됩니다.
TLV320AIC34EVM-K는 USB-MODEVM 인터페이스 보드라고 하는 USB 기반 마더보드와 Microsoft® Windows® 운영 체제를 실행하는 개인용 컴퓨터에서 사용할 수 있는 평가 소프트웨어가 포함된 (...)
Available in Linux main line: Yes
Available through git.ti.com: N/A
(...)
COEFFICIENT-CALC (TIBQ) calculates the coefficients for the digital filter biquad transfer function implemented in TI audio codecs. The characteristics of the digital filter are adjusted by selecting a filter type and moving a control point within a window that shows the transfer function gain and (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| NFBGA (ZAS) | 87 | Ultra Librarian |
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.