홈 스위치 및 멀티플렉서 아날로그 스위치 및 멀티플렉서 프로토콜/버스 스위치 및 멀티플렉서
홈
스위치 및 멀티플렉서
아날로그 스위치 및 멀티플렉서
프로토콜/버스 스위치 및 멀티플렉서
신규

TMUXHS4446-Q1

미리 보기

차량용, USB-C 10Gbps 대체 모드 6x4 멀티플렉서/디멀티플렉서

지금 주문하기
데이터 시트

TMUXHS4446-Q1

미리 보기
데이터 시트 지금 주문하기

제품 상세 정보

Protocols DisplayPort, USB 3.2 Gen 1x2, USB 3.2 Gen 2x1, USB-C Configuration 4:6 Number of channels 1 USB speed (Mbps) 10000 Bandwidth (MHz) 9500 Ron (typ) (mΩ) 7000 Input/output voltage (min) (V) 0 Input/output voltage (max) (V) 3.6 Supply current (typ) (µA) 350 ESD HBM (typ) (kV) 2 Operating temperature range (°C) -40 to 125 Off isolation (typ) (dB) -60 OFF-state leakage current (max) (µA) 10 Turnoff time (disable) (max) (ns) 650 Turnon time (enable) (max) (ns) 620 Rating Catalog
Protocols DisplayPort, USB 3.2 Gen 1x2, USB 3.2 Gen 2x1, USB-C Configuration 4:6 Number of channels 1 USB speed (Mbps) 10000 Bandwidth (MHz) 9500 Ron (typ) (mΩ) 7000 Input/output voltage (min) (V) 0 Input/output voltage (max) (V) 3.6 Supply current (typ) (µA) 350 ESD HBM (typ) (kV) 2 Operating temperature range (°C) -40 to 125 Off isolation (typ) (dB) -60 OFF-state leakage current (max) (µA) 10 Turnoff time (disable) (max) (ns) 650 Turnon time (enable) (max) (ns) 620 Rating Catalog
WQFN (RET) 40 18 mm² (6 mm × 3 mm)
  • Passive bidirectional USB-C Alternate Mode Mux to switch between USB and DisplayPort signals
  • Supports USB 3.2 up to 10Gbps (Gen 2.0) and DisplayPort 2.1 up to 10Gbps per lane (UHBR10)
  • Compatible for Source/Host and Sink/Device applications
  • −3dB differential BW: 9.5GHz
  • Dynamic characteristics:
    • Insertion loss = −1.6dB at 5GHz
    • Return loss = −18dB at 5GHz
  • Supports common mode voltage (CMV) from 0V to 1.8V
  • Adaptive CMV tracking
  • 6V tolerant SBU pins to survive short-to-VBUS events
  • Can be configured through GPIO pins or I2C
  • Supports both 1.8V and 3.3V I2C
  • Single supply voltage VCC: 3.3V
  • Active power consumption: 340µA
  • Low standby power consumption: 0.5µA (pin mode)
  • Extended Automotive temperature: −40°C to 125°C
  • Available in 3mm × 6mm QFN package
  • Passive bidirectional USB-C Alternate Mode Mux to switch between USB and DisplayPort signals
  • Supports USB 3.2 up to 10Gbps (Gen 2.0) and DisplayPort 2.1 up to 10Gbps per lane (UHBR10)
  • Compatible for Source/Host and Sink/Device applications
  • −3dB differential BW: 9.5GHz
  • Dynamic characteristics:
    • Insertion loss = −1.6dB at 5GHz
    • Return loss = −18dB at 5GHz
  • Supports common mode voltage (CMV) from 0V to 1.8V
  • Adaptive CMV tracking
  • 6V tolerant SBU pins to survive short-to-VBUS events
  • Can be configured through GPIO pins or I2C
  • Supports both 1.8V and 3.3V I2C
  • Single supply voltage VCC: 3.3V
  • Active power consumption: 340µA
  • Low standby power consumption: 0.5µA (pin mode)
  • Extended Automotive temperature: −40°C to 125°C
  • Available in 3mm × 6mm QFN package

The TMUXHS4446-Q1 is a high-speed bidirectional passive crosspoint switch or crossbar (Xbar). This device is used to switch between USB 3.2 Gen2 SuperSpeed and DisplayPort 1.4/2.1 (up to 10Gbps UHBR10) signals over a USB Type-C also known as USB-C interface. The device also provides switching for the low-speed SBU signals that are used for DisplayPort auxiliary channels. The TMUXHS4446-Q1 supports differential signaling with a common mode voltage (CMV) range of 0V to 1.8V and a differential amplitude from 0V to 1800mVpp. Adaptive CMV tracking enables the channel through the device to remain unchanged for the entire common-mode voltage range.

The dynamic characteristics of the TMUXHS4446-Q1 allows high-speed switching with minimum attenuation to the signal eye diagrams, and very little added jitter. The silicon design of the device is optimized for excellent frequency response at a higher frequency spectrum of the signals. The silicon signal traces and switch network of the TMUXHS4446-Q1 are matched for best intra-pair skew performance.

The TMUXHS4446-Q1 has an extended industrial temperature range (−40°C to 125°C) designed for many rugged applications, including industrial and high reliability use cases.

The TMUXHS4446-Q1 is a high-speed bidirectional passive crosspoint switch or crossbar (Xbar). This device is used to switch between USB 3.2 Gen2 SuperSpeed and DisplayPort 1.4/2.1 (up to 10Gbps UHBR10) signals over a USB Type-C also known as USB-C interface. The device also provides switching for the low-speed SBU signals that are used for DisplayPort auxiliary channels. The TMUXHS4446-Q1 supports differential signaling with a common mode voltage (CMV) range of 0V to 1.8V and a differential amplitude from 0V to 1800mVpp. Adaptive CMV tracking enables the channel through the device to remain unchanged for the entire common-mode voltage range.

The dynamic characteristics of the TMUXHS4446-Q1 allows high-speed switching with minimum attenuation to the signal eye diagrams, and very little added jitter. The silicon design of the device is optimized for excellent frequency response at a higher frequency spectrum of the signals. The silicon signal traces and switch network of the TMUXHS4446-Q1 are matched for best intra-pair skew performance.

The TMUXHS4446-Q1 has an extended industrial temperature range (−40°C to 125°C) designed for many rugged applications, including industrial and high reliability use cases.
filter 기타 프로토콜/버스 스위치 및 멀티플렉서 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
1개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 TMUXHS4446-Q1 Automotive rated USB-C 10Gbps Alt Mode Crossbar Mux datasheet PDF | HTML 2026. 6. 19

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

패키지 핀 CAD 기호, 풋프린트 및 3D 모델
WQFN (RET) 40 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상