TPS22980

활성

Thunderbolt 호스트/주변 장치 전원 멀티플렉서

지금 주문하기

데이터 시트

document-pdfAcrobat 3.3-V to 18-V MUX With Overcurrent Limit datasheet (Rev. C) (영어)

TPS22980

활성

데이터 시트

지금 주문하기

제품 상세 정보

Number of input channels

2

IN1, IN2 input voltage (max) (V)

3.6, 19.8

IN1, IN2 input voltage (min) (V)

3, 4.5

IN1 output current (max) (A)

1.5

IN2 output current (max) (A)

1.5

Quiescent current (Iq) (µA)

150

Imax (A)

0.5

Rating

Catalog

Features

Adjustable current limit, Inrush current control, Reverse current blocking, Thermal shutdown

IN1 rDS(on) (typ) (mΩ)

250

IN2 rDS(on) (typ) (mΩ)

250

Operating temperature range (°C)

-40 to 85

FET

Internal

Device type

Power muxes

Function

Adjustable current limit, Reverse current blocking, Thermal shutdown

Number of input channels

2

IN1, IN2 input voltage (max) (V)

3.6, 19.8

IN1, IN2 input voltage (min) (V)

3, 4.5

IN1 output current (max) (A)

1.5

IN2 output current (max) (A)

1.5

Quiescent current (Iq) (µA)

150

Imax (A)

0.5

Rating

Catalog

Features

Adjustable current limit, Inrush current control, Reverse current blocking, Thermal shutdown

IN1 rDS(on) (typ) (mΩ)

250

IN2 rDS(on) (typ) (mΩ)

250

Operating temperature range (°C)

-40 to 85

FET

Internal

Device type

Power muxes

Function

Adjustable current limit, Reverse current blocking, Thermal shutdown

VQFN (RGP)

20

16 mm² (4 mm × 4 mm)

Powered From 3.3V
4.5V to 19.8V High Voltage Switch
3V to 3.6V Switch
Adjustable Current Limit
Thermal Shutdown
Make Before Break Switch
High Voltage Discharge Before Low Voltage Make
Reverse Current Blocking

Powered From 3.3V
4.5V to 19.8V High Voltage Switch
3V to 3.6V Switch
Adjustable Current Limit
Thermal Shutdown
Make Before Break Switch
High Voltage Discharge Before Low Voltage Make
Reverse Current Blocking

The TPS22980 is a current-limited power mux providing a connection to a peripheral device from either a low voltage supply (3.0V up to 3.6V) or a high voltage supply (5V up to 18V). The desired output is selected by digital control signals.

The high voltage (VHV) and low voltage (V3P3) switch current limits are set with external resistance. Once the current limit is reached, the TPS22980 will control the switch to maintain the current at the limit.

When the high voltage supply is not present, the TPS22980 will maintain the connection to the output from the low voltage supply. When a high voltage line and high voltage enable signal is detected by the device, the high voltage switch will be turned on in conjunction with the low voltage switch until a reverse current is detected by the low voltage switch. The low voltage switch is then disabled allowing a seamless transition from a low voltage to a high voltage supply with minimal drop and shoot-through current.

To prevent current backflow during a transition from a VHV connection to a V3P3 connection, the TPS22980 will break the VHV connection and discharge the output to approximately 3.3V. Once the output reaches 3.3V the device will connect V3P3 switch. If a load is present, the output will transition to 0V before returning to 3.3V.

The TPS22980 is available in a 4mm x 4mm x 1mm QFN package.

The TPS22980 is a current-limited power mux providing a connection to a peripheral device from either a low voltage supply (3.0V up to 3.6V) or a high voltage supply (5V up to 18V). The desired output is selected by digital control signals.

The high voltage (VHV) and low voltage (V3P3) switch current limits are set with external resistance. Once the current limit is reached, the TPS22980 will control the switch to maintain the current at the limit.

When the high voltage supply is not present, the TPS22980 will maintain the connection to the output from the low voltage supply. When a high voltage line and high voltage enable signal is detected by the device, the high voltage switch will be turned on in conjunction with the low voltage switch until a reverse current is detected by the low voltage switch. The low voltage switch is then disabled allowing a seamless transition from a low voltage to a high voltage supply with minimal drop and shoot-through current.

To prevent current backflow during a transition from a VHV connection to a V3P3 connection, the TPS22980 will break the VHV connection and discharge the output to approximately 3.3V. Once the output reaches 3.3V the device will connect V3P3 switch. If a load is present, the output will transition to 0V before returning to 3.3V.

The TPS22980 is available in a 4mm x 4mm x 1mm QFN package.

filter

기타 전원 멀티플렉서 찾기

다운로드 스크립트와 함께 비디오 보기 비디오