전력 관리 DC/DC 스위칭 레귤레이터 DC/DC 컨트롤러

TPS51113

활성

고전류 게이트 드라이버를 지원하는 4.5V~13.2V, 300kHz 동기형 벅 컨트롤러

제품 상세 정보

Rating Catalog Topology Buck Iout (max) (A) 20 Vin (max) (V) 13.2 Vin (min) (V) 4.5 Vout (max) (V) 8 Vout (min) (V) 0.8 Control mode Voltage mode Features Enable, Power good, Prebias startup Duty cycle (max) (%) 72 Iq (typ) (A) 0.006 Number of phases 1 Operating temperature range (°C) -40 to 85
Rating Catalog Topology Buck Iout (max) (A) 20 Vin (max) (V) 13.2 Vin (min) (V) 4.5 Vout (max) (V) 8 Vout (min) (V) 0.8 Control mode Voltage mode Features Enable, Power good, Prebias startup Duty cycle (max) (%) 72 Iq (typ) (A) 0.006 Number of phases 1 Operating temperature range (°C) -40 to 85
VSON (DRC) 10 9 mm² (3 mm × 3 mm)
  • Flexible Power Rails: 5 V to 12 V
  • Reference: 800 mV ± 0.8%
  • Voltage Mode Control
  • Support Pre-biased Startup
  • Programmable Overcurrent Protection with Low-Side RDS(on) Current Sensing
  • Fixed 300-kHz (TPS51113) and 600-kHz (TPS51163) Switching Frequency
  • UV/OV Protections and Power Good Indicator
  • Internal Soft-start
  • Integrated High-Current Drivers Powered by VDD
  • 10-Pin 3 × 3 SON Package
  • APPLICATIONS
    • Server and Desktop Computer Subsystem Power Supplies (MCH, IOCH, PCI, Termination)
    • Distributed Power Supplies
    • General DC-DC Converters

  • Flexible Power Rails: 5 V to 12 V
  • Reference: 800 mV ± 0.8%
  • Voltage Mode Control
  • Support Pre-biased Startup
  • Programmable Overcurrent Protection with Low-Side RDS(on) Current Sensing
  • Fixed 300-kHz (TPS51113) and 600-kHz (TPS51163) Switching Frequency
  • UV/OV Protections and Power Good Indicator
  • Internal Soft-start
  • Integrated High-Current Drivers Powered by VDD
  • 10-Pin 3 × 3 SON Package
  • APPLICATIONS
    • Server and Desktop Computer Subsystem Power Supplies (MCH, IOCH, PCI, Termination)
    • Distributed Power Supplies
    • General DC-DC Converters

The TPS51113 and TPS51163 are cost-optimized, feature rich, single-channel synchronous-buck controllers that operates from a single 4.5-V to 13.2-V supply and can convert an input voltage as low as 1.5 V.

The controller implements voltage mode control with a fixed 300-kHz (TPS51113) and 600-kHz (TPS51163) switching frequency. The overcurrent (OC) protection employs the low-side RDS(on) current sensing and has user-programmable threshold. The OC threshold is set by the resistor from LDRV_OC pin to GND. The resistor value is read when the over-current programming circuit applies 10 µA of current to the LDRV_OC pin during the calibration phase of the start-up sequence.

The TPS51113/TPS51163 also supports output pre-biased startup.

The strong gate drivers with low deadtime allow for the utilization of larger MOSFETs to achieve higher efficiency. An adaptive anti-cross conduction scheme is used to prevent shoot-through between the power FETs.

The TPS51113 and TPS51163 are cost-optimized, feature rich, single-channel synchronous-buck controllers that operates from a single 4.5-V to 13.2-V supply and can convert an input voltage as low as 1.5 V.

The controller implements voltage mode control with a fixed 300-kHz (TPS51113) and 600-kHz (TPS51163) switching frequency. The overcurrent (OC) protection employs the low-side RDS(on) current sensing and has user-programmable threshold. The OC threshold is set by the resistor from LDRV_OC pin to GND. The resistor value is read when the over-current programming circuit applies 10 µA of current to the LDRV_OC pin during the calibration phase of the start-up sequence.

The TPS51113/TPS51163 also supports output pre-biased startup.

The strong gate drivers with low deadtime allow for the utilization of larger MOSFETs to achieve higher efficiency. An adaptive anti-cross conduction scheme is used to prevent shoot-through between the power FETs.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
2개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 SINGLE SYNCHRONOUS BUCK CONTROLLER datasheet 2008. 7. 12
사용 설명서 TPS51113 Buck Controller Evaluation Module User's Guide (Rev. A) PDF | HTML 2022. 2. 1

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

시뮬레이션 모델

TPS51113 TINA-TI Start-up Reference Design (Rev. A)

SLIM231A.TSC (210 KB) - TINA-TI 레퍼런스 설계
지원되는 제품 및 하드웨어
시뮬레이션 모델

TPS51113 TINA-TI Steady State Reference Design (Rev. A)

SLIM232A.TSC (210 KB) - TINA-TI 레퍼런스 설계
지원되는 제품 및 하드웨어
시뮬레이션 모델

TPS51113 TINA-TI Transient Spice Model (Rev. A)

SLIM230A.ZIP (61 KB) - Tina-TI Spice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

TPS51113 Unencrypted PSpice Transient Model Package (Rev. A)

SLIM012A.ZIP (81 KB) - PSpice 모델
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
VSON (DRC) 10 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상