홈 전력 관리 DC/DC 스위칭 레귤레이터 DC/DC 컨버터
홈
전력 관리
DC/DC 스위칭 레귤레이터
DC/DC 컨버터
신규

TPS55285A

활성

I2C 인터페이스를 지원하는 22V 8A 벅-부스트 컨버터

지금 주문하기
데이터 시트

TPS55285A

활성
데이터 시트 지금 주문하기

제품 상세 정보

Rating Catalog Topology Buck-Boost Vin (max) (V) 22 Vin (min) (V) 2.4 Vout (max) (V) 22 Vout (min) (V) 0.8 Switch current limit (typ) (A) 8 Features Adjustable current limit, Dynamic voltage scaling, Enable, Frequency synchronization, I2C interface, Light-load efficiency, Load Disconnect, Output discharge, Spread Spectrum, Synchronous rectification, USB C/PD compatible, UVLO adjustable EMI features Frequency Dithering, Spread Spectrum Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00072 Duty cycle (max) (%) 100
Rating Catalog Topology Buck-Boost Vin (max) (V) 22 Vin (min) (V) 2.4 Vout (max) (V) 22 Vout (min) (V) 0.8 Switch current limit (typ) (A) 8 Features Adjustable current limit, Dynamic voltage scaling, Enable, Frequency synchronization, I2C interface, Light-load efficiency, Load Disconnect, Output discharge, Spread Spectrum, Synchronous rectification, USB C/PD compatible, UVLO adjustable EMI features Frequency Dithering, Spread Spectrum Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00072 Duty cycle (max) (%) 100
WQFN-HR (VAL) 15 8.75 mm² 3.5 x 2.5
  • Programmable power supply (PPS) support for USB power delivery (USB PD)
    • Wide input voltage range: 2.4V to 22V
    • Minimum input voltage for start-up: 3.0V
    • Programmable output voltage range: 0.8V to 22V with 10mV step
    • ±1% reference voltage accuracy
    • Adjustable output voltage compensation for voltage drop over the cable
    • Programmable output current limit up to 6.35A with 50mA step
  • High efficiency over entire load range
    • 92.0% efficiency at VIN = 20V, VOUT = 5V and IOUT = 5A
    • 95.7% efficiency at VIN = 12V, VOUT = 15V and IOUT = 5A
    • 92.3% efficiency at VIN = 12V, VOUT = 20V and IOUT = 3A
  • I2C programming
    • Output enable (OE) on and off
    • Slew rate of output voltage change
    • Switching frequency: 400kHz, 800kHz, 1.6MHz, 2.1MHz
    • Programmable PFM and FPWM mode at light load
    • Spread spectrum enable, disable
    • Output discharge enable, disable
  • Rich protection features
    • Input overvoltage protection
    • Output relative overvoltage protection
    • Hiccup mode for output short-circuit protection
    • Thermal shutdown protection
    • Average inductor current limit: 8A
  • Small design size
    • Four low RDS(ON) internal MOSFETs
    • Maximum switching frequency up to 2.1MHz
    • 2.5mm × 3.5mm HotRod™ WQFN package
  • Programmable power supply (PPS) support for USB power delivery (USB PD)
    • Wide input voltage range: 2.4V to 22V
    • Minimum input voltage for start-up: 3.0V
    • Programmable output voltage range: 0.8V to 22V with 10mV step
    • ±1% reference voltage accuracy
    • Adjustable output voltage compensation for voltage drop over the cable
    • Programmable output current limit up to 6.35A with 50mA step
  • High efficiency over entire load range
    • 92.0% efficiency at VIN = 20V, VOUT = 5V and IOUT = 5A
    • 95.7% efficiency at VIN = 12V, VOUT = 15V and IOUT = 5A
    • 92.3% efficiency at VIN = 12V, VOUT = 20V and IOUT = 3A
  • I2C programming
    • Output enable (OE) on and off
    • Slew rate of output voltage change
    • Switching frequency: 400kHz, 800kHz, 1.6MHz, 2.1MHz
    • Programmable PFM and FPWM mode at light load
    • Spread spectrum enable, disable
    • Output discharge enable, disable
  • Rich protection features
    • Input overvoltage protection
    • Output relative overvoltage protection
    • Hiccup mode for output short-circuit protection
    • Thermal shutdown protection
    • Average inductor current limit: 8A
  • Small design size
    • Four low RDS(ON) internal MOSFETs
    • Maximum switching frequency up to 2.1MHz
    • 2.5mm × 3.5mm HotRod™ WQFN package

The TPS55285A is a fully integrated, synchronous buck-boost converter that is designed for converting battery voltage, USB power delivery (USB PD) or adapter voltage into power supply rails. The TPS55285A integrates four 15mΩ MOSFETs to provide a high efficiency and small design size.

The TPS55285A has a wide input voltage range from 2.4V (3.0V rising) to 22V and is capable of outputting 0.8V to 22V voltage with 10mV step to support a variety of applications. The TPS55285A features 8A average inductor current limit and supplies up to 7A output current in buck mode. In boost mode, the device is able to deliver 60W from 12V input or 30W from 5V input.

Through the I2C interface, the output voltage of the TPS55285A is programmed dynamically. The default output voltage is 5V when the device is enabled. The I2C interface allows for configuration of slew rate of the output voltage change, switching frequency, forced PWM mode operation.

The TPS55285A offers input and output overvoltage protection, average inductor current limit, cycle-by-cycle peak current limit and output short circuit protection. The TPS55285A also allows for safe operating with output current limit without external output current sense resistor and hiccup mode protection in sustained overload conditions.

The TPS55285A is a fully integrated, synchronous buck-boost converter that is designed for converting battery voltage, USB power delivery (USB PD) or adapter voltage into power supply rails. The TPS55285A integrates four 15mΩ MOSFETs to provide a high efficiency and small design size.

The TPS55285A has a wide input voltage range from 2.4V (3.0V rising) to 22V and is capable of outputting 0.8V to 22V voltage with 10mV step to support a variety of applications. The TPS55285A features 8A average inductor current limit and supplies up to 7A output current in buck mode. In boost mode, the device is able to deliver 60W from 12V input or 30W from 5V input.

Through the I2C interface, the output voltage of the TPS55285A is programmed dynamically. The default output voltage is 5V when the device is enabled. The I2C interface allows for configuration of slew rate of the output voltage change, switching frequency, forced PWM mode operation.

The TPS55285A offers input and output overvoltage protection, average inductor current limit, cycle-by-cycle peak current limit and output short circuit protection. The TPS55285A also allows for safe operating with output current limit without external output current sense resistor and hiccup mode protection in sustained overload conditions.
filter 기타 DC/DC 컨버터 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
1개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet TPS55285A 22V, 8A, Buck-Boost Converter With I2 C Interface datasheet PDF | HTML 2026/07/06

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS552852EVM — TPS552852 평가 모듈

The TPS552852EVM helps to evaluate the behavior and performance of the TPS552852 at different input voltages, output voltages, and load conditions. This EVM is designed for 2.4V to 22V input voltage and 12V default output voltage applications. This EVM has test points for Vin, Vout, SW1, SW2, VCC, (...)
사용 설명서: PDF | HTML
TI.com에서 구매할 수 없음
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
WQFN-HR (VAL) 15 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상