TPS562211
- Input voltage: 4.2 V to 18 V
- Output voltage: 0.6 V to 7 V
- Up to 2-A continuous output current
- Minimum switching on time: 45 ns
- Maximum duty cycle: 98%
- High efficiency
- Integrated 66-mΩ and 33-mΩ MOSFETs
- Quiescent current 120-µA typical
- Highly flexible and easy to
use
- Selectable Eco-mode or FCCM operation
- Selectable power good indicator or external soft start
- Precise enable input
- High accuracy
- Reference voltage accuracy: ±1% (25°C)
- Switching frequency tolerance: ±8.5%
- Small solution size
- Internal compensation for ease of use
- SOT583 package
- Minimum external components
- Cycle-by-cycle current limit for both high-side and low-side MOSFETs
- Non-latched OVP, UVP, UVLO, and TSD protections
- Create a custom design using TPS562211 with the WEBENCH® Power Designer
The TPS562211 is a cost effective and highly flexible synchronous buck converter that provides selectable Eco-mode operation or FCCM (Force Continuous Conduction Mode) operation. A selectable Power-Good indicator or external soft start is also configurable through the MODE pin. Power sequencing is possible by correctly configuring Enable, Power-Good indicator, or external soft start. A wide input voltage range of 4.2 V to 18 V supports a wide variety of common input rails like 12 V and 15 V. It supports up to 2-A continuous output current at output voltages between 0.6 V and 7 V.
The device provides fast transient response with true fixed switching frequency through the use of the Advanced Emulated Current Mode (AECM) control topology. With internal smart loop bandwidth control, the device provides fast transient response over a wide output voltage range without the need for external compensation.
Cycle-by-cycle current limit on the high-side peak current protects the device in overload situations and is enhanced by a low-side valley current limit, which prevents current runaway. Hiccup mode would be triggered under overvoltage protection (OVP), undervoltage protection (UVP), UVLO protection, and thermal shutdown.
The device is available in 1.6-mm × 2.1-mm SOT583 package.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS562211 4.2-V to 18-V Input, 2-A Synchronous Buck Converter in SOT583 Package datasheet (Rev. A) | PDF | HTML | 2021. 8. 20 | |
| 애플리케이션 노트 | Transient Response Comparison of AECM with D-CAP2 and PCM Control | PDF | HTML | 2022. 12. 21 | ||
| 백서 | Achieving Fast Load-Transient Response and Low EMI with the AECM DC/DC Control (Rev. A) | PDF | HTML | 2022. 10. 24 | ||
| Application brief | Benefit from Highly Flexible and Easy to Use DC/DC Solution | PDF | HTML | 2022. 1. 24 | ||
| 인증서 | TPS562211EVM EU Declaration of Conformity (DoC) | 2020. 7. 29 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS562211EVM — 18V 입력, 2A 출력, 600kHz, 동기 벅 컨버터 SOT583 평가 모듈
PMP41017 — GaN 및 C2000™ MCU가 탑재된 3kW 2상 인터리브 하프 브리지 LLC 레퍼런스 설계
이 레퍼런스 설계는 LMG3422 및 F280039C 장치를 사용하는 3kW, 2상, 인터리브 하프 브리지 인덕터-인덕터-커패시터(LLC)입니다. 이 설계는 피크 효율 98.1%와 313W/in³의 전력 밀도를 달성할 수 있고 CRPS(Common Redundant Power Supply) 서버 전원 공급 장치의 출력단으로 사용 가능하며, 인터리빙 및 전류 균형 등 2개의 병렬 LLC 스테이지에 대한 제어 방법을 평가하는 데 사용할 수 있습니다.
PMP41037 — GaN 및 C2000을 지원하는 1KW, 800V~12V 직렬 하프 브리지 양방향 DCX 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-5X3 (DRL) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.