전력 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

TPS62902

활성

1.5mm × 2mm QFN 패키지의 3V~17V, 2A 고효율 및 저 IQ 벅 컨버터

제품 상세 정보

Rating Catalog Topology Buck Iout (max) (A) 2 Vin (max) (V) 17 Vin (min) (V) 3 Vout (max) (V) 5.5 Vout (min) (V) 0.4 Features Enable, Forced PWM, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable Control mode DCS-Control Switching frequency (min) (kHz) 1000 Switching frequency (max) (kHz) 2500 Operating temperature range (°C) -40 to 165 Iq (typ) (µA) 4 Duty cycle (max) (%) 100 Type Converter
Rating Catalog Topology Buck Iout (max) (A) 2 Vin (max) (V) 17 Vin (min) (V) 3 Vout (max) (V) 5.5 Vout (min) (V) 0.4 Features Enable, Forced PWM, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable Control mode DCS-Control Switching frequency (min) (kHz) 1000 Switching frequency (max) (kHz) 2500 Operating temperature range (°C) -40 to 165 Iq (typ) (µA) 4 Duty cycle (max) (%) 100 Type Converter
VQFN-HR (RPJ) 9 3 mm² 2 x 1.5
  • High efficiency for wide duty cycle and load range
    • I Q: 4 µA typical
    • Selectable switching frequency of 2.5 MHz and 1.0 MHz
    • R DS(ON): 62-mΩ high side, 22-mΩ low side
    • Automatic efficiency enhancement (AEE)
  • Small 1.5-mm × 2.0-mm VQFN package with 0.5-mm pitch
  • Up to 2-A continuous output current
  • ±0.9% feedback voltage accuracy across temp (-40°C to 150°C)
  • Configurable ouput voltage options:
    • V FB external divider: 0.6 V to 5.5 V
    • V SET internal divider: 16 options between 0.4 V and 5.5 V
  • DCS-Control™ topology with 100% mode
  • Highly flexible and easy to use
    • Optimized pinout for single-layer routing
    • Precise enable input
    • Forced PWM or auto power save mode
    • Power good output
    • Selectable active output discharge
    • Adjustable soft start and tracking
  • No external bootstrap capacitor required
  • Create a custom design using the TPS62902 using the WEBENCH Power Designer
  • High efficiency for wide duty cycle and load range
    • I Q: 4 µA typical
    • Selectable switching frequency of 2.5 MHz and 1.0 MHz
    • R DS(ON): 62-mΩ high side, 22-mΩ low side
    • Automatic efficiency enhancement (AEE)
  • Small 1.5-mm × 2.0-mm VQFN package with 0.5-mm pitch
  • Up to 2-A continuous output current
  • ±0.9% feedback voltage accuracy across temp (-40°C to 150°C)
  • Configurable ouput voltage options:
    • V FB external divider: 0.6 V to 5.5 V
    • V SET internal divider: 16 options between 0.4 V and 5.5 V
  • DCS-Control™ topology with 100% mode
  • Highly flexible and easy to use
    • Optimized pinout for single-layer routing
    • Precise enable input
    • Forced PWM or auto power save mode
    • Power good output
    • Selectable active output discharge
    • Adjustable soft start and tracking
  • No external bootstrap capacitor required
  • Create a custom design using the TPS62902 using the WEBENCH Power Designer

The TPS62902 is a highly-efficient, small, and flexible synchronous step-down DC-DC converter that is easy to use. A selectable switching frequency of 2.5 MHz or 1.0 MHz allows the use of small inductors and provides fast transient response. The device supports high V OUT accuracy of ± 1% with DCS-Control topology. The wide input voltage range of 3-V to 17-V supports a variety of nominal inputs, like 12-V supply rails, single-cell or multi-cell Li-Ion, and 5-V or 3.3-V rails.

The TPS62902 can automatically enter power save mode (if auto PFM/PWM is selected) at light loads to maintain high efficiency. Additionally, to provide high efficiency at very small loads, the device has a low typical quiescent current of 4 µA. AEE, if enabled, provides high efficiency across V IN, V OUT, and load current. The device includes a S-CONF/MODE input to set the internal/external divider, switching frequency, output voltage discharge, and automatic power save mode or forced PWM operation.

The device is available in small 9-pin VQFN package measuring 1.50 mm × 2.00 mm with 0.5-mm pitch.

The TPS62902 is a highly-efficient, small, and flexible synchronous step-down DC-DC converter that is easy to use. A selectable switching frequency of 2.5 MHz or 1.0 MHz allows the use of small inductors and provides fast transient response. The device supports high V OUT accuracy of ± 1% with DCS-Control topology. The wide input voltage range of 3-V to 17-V supports a variety of nominal inputs, like 12-V supply rails, single-cell or multi-cell Li-Ion, and 5-V or 3.3-V rails.

The TPS62902 can automatically enter power save mode (if auto PFM/PWM is selected) at light loads to maintain high efficiency. Additionally, to provide high efficiency at very small loads, the device has a low typical quiescent current of 4 µA. AEE, if enabled, provides high efficiency across V IN, V OUT, and load current. The device includes a S-CONF/MODE input to set the internal/external divider, switching frequency, output voltage discharge, and automatic power save mode or forced PWM operation.

The device is available in small 9-pin VQFN package measuring 1.50 mm × 2.00 mm with 0.5-mm pitch.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치보다 업그레이드된 기능을 지원하는 드롭인 대체품
TPS62901 활성 1.5mm × 2mm QFN 패키지의 3V~17V, 1A 고효율 및 저 IQ 벅 컨버터 Pin-to-pin 1-A output current
TPS62903 활성 1.5mm × 2mm QFN 패키지의 3V~17V, 3A 고효율 저 IQ 벅 컨버터 Pin-to-pin 3-A output current
비교 대상 장치와 유사한 기능
TPSM82902 활성 3V~17V, 2A 고효율, 저 IQ, 동기 벅 컨버터 모듈, 통합 인덕터 포함 Module version featuring an integrated inductor.

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
5개 모두 보기
유형 직함 날짜
* Data sheet TPS62902, 3-V to 17-V, High Efficiency and Low IQBuck Converter in 1.5-mm × 2-mm QFN Package datasheet (Rev. A) PDF | HTML 2023/11/06
Application note How to Best Use TPS62903 for a Given Application Requirement PDF | HTML 2021/08/13
Application note Comparison of TPS6290x vs. TPS621x0 PDF | HTML 2021/07/23
Application brief Multi-Function Pins for Easy Designing PDF | HTML 2021/07/07
Certificate TPS62902EVM-069 EU RoHS Declaration of Conformity (DoC) 2020/12/15

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS62902EVM-069 — 1.5mm x 2mm QFN 패키지의 17VIN, 2A, 저 IQ 벅 컨버터 평가 모듈

TPS62902EVM-069(BSR069-002) 평가 모듈(EVM)은 소형 1.5mm x 2mm QFN 패키지에서 TPS62902 2A 벅 컨버터의 평가를 용이하게 합니다. 이 EVM은 3V~17V의 입력 전압에서 1.8V 출력 전압을 출력합니다. TPS62902는 공장 및 건물 자동화, IP 네트워크 카메라, 산업용 PC, 데이터 센터 스위치, 서보 드라이브, 모바일 및 임베디드 컴퓨팅 및 12V의 입력 전압을 지원하는 모든 애플리케이션 또는 1~4셀 리튬 배터리 팩 등 다양한 산업용, 엔터프라이즈용 및 개인용 전자 제품에 (...)
사용 설명서: PDF | HTML
TI.com에서 구매 불가
시뮬레이션 모델

TPS62902 PSpice Transient Model

SLVMDO7.ZIP (239 KB) - PSpice Model
시뮬레이션 모델

TPS62902 SIMPLIS Transient and Average Model

SLVMDP2.ZIP (901 KB) - SIMPLIS Model
거버(Gerber) 파일

BSR069A Gerbers

SNVC242.ZIP (394 KB)
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN-HR (RPJ) 9 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상