TPS650006
- Step-Down Converters:
- VIN Range From 2.3 V to 6 V
- Spread Spectrum Clock (SSC) Generation for
Reduced EMI - 2.25-MHz Fixed Frequency Operation
- 600-mA or 1-A (TPS650061) Output Current
- Low Dropouts (LDOs):
- VIN Range From 1.6 V to 6 V
- Adjustable Output Voltage
- Up to 300-mA Output Current
- Separate Power Inputs and Enables
- Supply Voltage Supervisor (TPS65001)
- Manual Reset Input for Push Button
- Adjustable Reset Time
- Adjustable Reset Voltage
- 3-mm × 3-mm 16-Pin WQFN (TPS65000)
- 3-mm × 3-mm 20-Pin WQFN (TPS65001)
- APPLICATIONS
- Points-of-Load
- Embedded Processor Power
- Cell Phones
- Smart Phones
- PDAs
- Pocket PCs
- Portable Media Players
All other trademarks are the property of their respective owners
The TPS6500xx devices are single-chip power management (PWM) ICs for portable applications. Both devices combine a single step-down converter with two low-dropout (LDO) regulators. The step-down converter enters a low-power mode at light load for maximum efficiency across the widest possible range of load currents. For low-noise applications, the devices can be forced into fixed-frequency PWM through a pin. The step-down converter is small because of its small inductor and capacitors. The step-down converter has power good status output for sequencing. The LDOs can supply 300 mA and operate with an input voltage range from 1.6 V to 6 V. A step-down converter or main battery can power the LDOs directly. The step-down converter and the LDOs have separate voltage inputs that enable maximum design and sequencing flexibility.
The TPS65001 extends functionality by adding a supply voltage supervisor (SVS). To maximize the flexibility of the SVS, the reset voltage is set with two external resistors and the reset time is set by a small external capacitor. For external control, the SVS can use its active-low manual reset input to connect to a push button.
The TPS65000 is available in a 16-pin leadless package (3 mm × 3 mm QFN). The TPS65001 is available in a 20-pin leadless package (3 mm × 3 mm QFN).
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS6500xx 2.25-MHz Step-Down Converter With Dual Low Dropouts and Supply Voltage Supervisor datasheet (Rev. C) | PDF | HTML | 2015/09/30 |
| White paper | Power Management Solutions for Ultra-Low-Power 16-Bit MSP430 MCUs (Rev. D) | 2012/03/28 | ||
| User guide | Using the TPS650001/3/6 EVM 2.25 MHz Step-Down Converter with Dual LDO | 2010/03/01 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
EVMK2GX — 66AK2Gx 1GHz 평가 모듈
EVMK2GX("K2G"라고도 함) 1GHz EVM(평가 모듈)을 사용하면 개발자가 66AK2Gx 프로세서 제품군의 평가를 즉시 시작하고 오디오, 산업용 모터 제어, 스마트 그리드 보호 및 기타 고신뢰성, 실시간 컴퓨팅 집약적 애플리케이션의 개발을 가속화할 수 있습니다. 기존의 KeyStone 기반 SoC 장치와 마찬가지로 66AK2Gx는 DSP 및 Arm® 코어가 모두 시스템의 모든 메모리와 주변 장치를 마스터할 수 있습니다. 이 아키텍처는 DSP 중심 또는 Arm 중심의 시스템 설계를 달성할 수 있는 소프트웨어 유연성을 (...)
EVMK2GXS — 66AK2Gx(K2G) 1GHz 높은 보안 평가 모듈
개발자는 K2G 1GHz 높은 보안 평가 모듈(EVM)을 통해 높은 보안 개발 버전의 66AK2Gx 프로세서 프로그래밍을 평가 및 테스트하고 오디오 및 산업용 실시간 애플리케이션의 보안 부팅 제품 개발을 다음 단계를 가속화할 수 있습니다. 이 EVM은 Linux 및 TI-RTOS 운영 체제 모두의 프로세서 SDK에서 지원되며 EVMK2GX와 동일한 특징과 기능을 지원합니다.
참고: 이 EVM을 구매하고 소프트웨어에 액세스하려면 승인이 필요합니다. "지금 주문하기" 표의 요청 버튼을 사용하여 요청을 제출합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RTE) | 16 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.