TPS652170
- Charger and power path
- 2-A output current on power path
- Linear charger; 700-mA maximum charge current
- 20-V tolerant USB and AC inputs
- Thermal regulation, safety timers
- Temperature sense input
- Step-down converter (DCDC1, DCDC2,
DCDC3)
- Three step-down converter with integrated switching FETs
- 2.25-MHz fixed frequency operation
- Power-save mode at light-load current
- Output voltage accuracy in PWM mode ±2%
- 100% duty cycle for lowest dropout
- Typical 15-µA quiescent per converter
- Passive discharge to ground when disabled
- LDO regulators (LDO1, LDO2)
- Two adjustable LDOs
- LDO2 can be configured to track DCDC3
- Typical 15-µA quiescent current
- Load switches (LDO3, LDO4)
- Two independent load switches that can be configured as LDOs
- WLED driver
- Internally generated PWM for dimming control
- 38-V open-LED protection
- Supports two strings of up to 10 LEDs at 25 mA each
- Internal low-side current sinks
- Protection
- Undervoltage lockout and battery fault comparator
- Always-on push-button monitor
- Hardware reset pin
- Password protected I2C registers
- Interface
- I2C interface (address 0x24)
- Password-protected I2C registers
The TPS652170 is a single-chip power management IC (PMIC) specifically designed to power the AM335x ARM® Cortex®-A8 processor in portable and 5-V line-powered applications. The PMIC device provides a linear battery charger for single-cell Li-ion and Li-polymer batteries, dual-input power path, three step-down converters, four low-dropout (LDO) regulators, and a high-efficiency boost converter to power two strings of up to 10 LEDs each. The system can be supplied by any combination of USB port, 5-V AC adaptor, or Li-Ion battery. The device is characterized across a –40°C to +105°C temperature range which makes it suitable for industrial applications. Three high-efficiency 2.25-MHz step-down converters can providing the core voltage, memory, and I/O voltage for a system. The TPS652170 device comes in a 48-pin leadless package (6-mm × 6-mm VQFN) with a 0.4-mm pitch.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS652170 Programmable PMIC for Battery-Powered Systems datasheet | PDF | HTML | 2019. 6. 11 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BOOSTXL-TPS652170 — BOOSTXL - TPS652170 고객 프로그래밍 BoosterPack
TPS65217CEVM — TPS65217C 평가 모듈
The TPS65217CEVM is a fully assembled platform for evaluating the performance of the TPS65217C power management device.
IPG-UI — IPG-UI EVM GUI (Windows Installer)
IPG-UI GUI를 사용하여 여러 PMIC 디바이스를 구성하여 이러한 디바이스의 기능과 성능을 평가할 수 있습니다. 이 GUI는 웹 기반 기술을 사용하여 제작되었으며 USB2ANY 어댑터 보드를 사용하여 EVM 하드웨어와의 상호 작용을 지원합니다. USB2ANY 탐색기는 USB2ANY 어댑터 보드의 펌웨어를 필요한 버전(2.7.0.0 이상)으로 업데이트할 수 있도록 제공됩니다.
IPG-UI-LINUX — IPG-UI EVM GUI (Linux Installer)
IPG-UI GUI를 사용하여 여러 PMIC 디바이스를 구성하여 이러한 디바이스의 기능과 성능을 평가할 수 있습니다. 이 GUI는 웹 기반 기술을 사용하여 제작되었으며 USB2ANY 어댑터 보드를 사용하여 EVM 하드웨어와의 상호 작용을 지원합니다. USB2ANY 탐색기는 USB2ANY 어댑터 보드의 펌웨어를 필요한 버전(2.7.0.0 이상)으로 업데이트할 수 있도록 제공됩니다.
IPG-UI-OSX — IPG-UI EVM GUI (OSX Installer)
IPG-UI GUI를 사용하여 여러 PMIC 디바이스를 구성하여 이러한 디바이스의 기능과 성능을 평가할 수 있습니다. 이 GUI는 웹 기반 기술을 사용하여 제작되었으며 USB2ANY 어댑터 보드를 사용하여 EVM 하드웨어와의 상호 작용을 지원합니다. USB2ANY 탐색기는 USB2ANY 어댑터 보드의 펌웨어를 필요한 버전(2.7.0.0 이상)으로 업데이트할 수 있도록 제공됩니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RSL) | 48 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.