TPS7B7802-Q1
- Qualified for automotive applications
- AEC-Q100 qualified with the following results:
- Device temperature grade 1: –40°C to 125°C ambient operating temperature range
- Device HBM ESD classification 2
- Device CDM ESD classification C4B
- Single and dual-channel LDO with current sense and adjustable current-limit
- 4.5V to 40V wide input voltage range, 45V load dump
- Power switch mode when tying FB to GND
- 1.5V to 20V adjustable output voltage
- Up to 300mA output current per channel
- Adjustable current-limit with external resistor
- High accuracy current-sense to detect antenna open condition at low current without further calibration
- High power-supply rejection ratio: typical 73dB at 100Hz
- Integrated reverse-polarity protection, down to –40V and no need for external diode
- 500mV maximum dropout voltage at 100mA load
- Stable with output capacitor in 2.2µF to 100µF range (ESR 1mΩ to 5Ω)
- Integrated protection and diagnostics:
- Thermal shutdown
- Undervoltage lockout (UVLO)
- Short-circuit protection
- Reverse battery polarity protection
- Reverse-current protection
- Output short-to-battery protection
- Output inductive load clamp
- Multiplexing current sense between channels and devices
- Ability to distinguish all faults with current sense
- 16-pin HTSSOP PowerPAD™ package
The TPS7B770x-Q1 family of devices feature a single and dual, high-voltage low-dropout regulator (LDO) with current sensing, designed to operate with a wide input-voltage range from 4.5V to 40V (45V load dump protection). These devices provide power to the low-noise amplifiers of the active antenna through a coax cable with 300mA per channel current. Each channel also provides an adjustable output voltage from 1.5V to 20V.
These devices provide diagnostics through the current sense and error pins. To monitor the load current, a high-side current-sense circuitry provides a proportional analog output to the sensed load current. The accurate current sense allows detection of open, normal, and short-circuit conditions without the need for further calibration. Multiplex the current sense between channels and devices to save analog-to-digital converter (ADC) resources. Each channel also implements adjustable current limit with an external resistor.
An integrated reverse polarity diode eliminates the need for an external diode. These devices feature standard thermal shutdown, short-to-battery protection on the output, and reverse current protection. Each channel has internal inductive clamp protection on the output during inductive switch off.
These devices operate over a –40°C to +125°C ambient temperature range.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | TPS7B7802-Q1 Automotive, 500mA, Dual-Channel, Antenna LDO With I2 C Diagnostics datasheet | PDF | HTML | 2026/06/05 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RTJ) | 20 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.