데이터 시트
TPS7H3134-SP
이 정보를 표시할 수 없습니다. 제품 데이터 시트를 참조하십시오.
- Radiation performance:
- Radiation hardness assurance (RHA) up to a total ionizing dose (TID) of 100krad(Si)
- Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 75MeV-cm2/mg
- Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 75MeV-cm2/mg
- Wide supply IN voltage range (VIN): 3V to 14V
- Monitor up to 4 voltage rails with high accuracy:
- TPS7H3024: 2 OV + 2 UV or 2 window with push-pull RESETx
- TPS7H3134: 2 OV + 2 UV or 2 window with open-drain RESETx
- TPS7H3034: 4 UV or 4 OV with push-pull RESETx
- TPS7H3134: 4 UV or 4 OV with open-drain RESETx
- Monitor coherent processor execution using the watchdog timer
- Single resistor programmable global delay timer
- Programmable watchdog time-out
- Precision threshold voltage and hysteresis current:
- VTH_SENSEx of 599.7mV ± 1% across: voltage, temperature, and radiation (TID)
- IHYS_SENSEx of 24µA ± 3% across: voltage, temperature, and radiation (TID)
- Push-Pull outputs with programmable pull-up voltage from 1.6V to 7V
- Global RESETx pull-up domain (VPULL_UP1)
- Common PWRGD and WDO pull-up domain (VPULL_UP2)
- SR_UVLO input to reset all outputs
- Can also be used as configurable undervoltage lockout with an external resistor divider
- Available in military (–55°C to 125°C) temperature range
The TPS7H3xx4-SP is an integrated, 3V to 14V, four-channel radiation-hardened power-supply supervisor with watchdog. An accurate 599.7mV ± 1% threshold voltage and a 24µA ± 3% hysteresis current provide programmable monitoring voltages. A global programmable delay timer is programmed via a single resistor. Additionally, a PWRGD output is provided to monitor the global power tree status. The device also incorporates a positive edge detection watchdog timer to monitor an external processor for coherent execution. Faults can be detected and mitigated by the external controller, using the SR_UVLO input. The device is offered with push-pull and open-drain outputs types.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
1개 모두 보기 | 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | TPS7H3xx4-SP Radiation-Hardened, 14V, 4-Channel Supervisor With Watchdog Timer datasheet (Rev. B) | PDF | HTML | 2026/05/13 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
TPS7H3134EVM-CVAL — TPS7H3134-SP 평가 모듈
TPS7H3024EVM-CVAL, TPS7H3124EVM-CVAL, TPS7H3034EVM-CVAL 및 TPS7H3134EVM-CVAL은 단일 TPS7H3024-SP, TPS7H3124-SP, TPS7H3034-SP 또는 TPS7H3134-SP 통제기(세라믹 패키지)의 동작을 시연합니다. 이 보드들은 동일한 레이아웃을 사용하지만 BOM에 약간의 차이가 있으며 장착된 IC에 맞게 구성을 업데이트하는 한 상호 교환하여 사용할 수 있습니다. 이러한 보드를 통칭하여 TPS7H3xx4EVM-CVAL이라고 합니다.
시뮬레이션 툴
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| CFP (HFT) | 22 | Ultra Librarian |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치