전원 관리 AC/DC & DC/DC controllers (external FET)

UC1836

활성

고효율 레귤레이터 컨트롤러

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS7A47 활성 활성화를 지원하는 1A, 36V, 저잡음, 높은 PSRR, 저손실 전압 레귤레이터 Alternative product with enable, soft start and better accuracy

제품 상세 정보

Vin (min) (V) 6 Vin (max) (V) 40 Iout (max) (A) 2.5 Operating temperature range (°C) -55 to 125 Rating Military Vout (min) (V) 2.5 Vout (max) (V) 35 Iq (typ) (A) 0.0037
Vin (min) (V) 6 Vin (max) (V) 40 Iout (max) (A) 2.5 Operating temperature range (°C) -55 to 125 Rating Military Vout (min) (V) 2.5 Vout (max) (V) 35 Iq (typ) (A) 0.0037
CDIP (JG) 8 64.032 mm² 9.6 x 6.67
  • Complete Control for a High Current, Low Dropout, Linear Regulator
  • Fixed 5V or Adjustable Output Voltage
  • Accurate 2.5A Current Limiting with Foldback
  • Internal Current Sense Resistor
  • Remote Sense for Improved Load Regulation
  • External Shutdown
  • Under-Voltage Lockout and Reverse Voltage Protection
  • Thermal Shutdown Protection
  • 8 Pin Mini-Dip Package (Surface Mount also Available)
  • Complete Control for a High Current, Low Dropout, Linear Regulator
  • Fixed 5V or Adjustable Output Voltage
  • Accurate 2.5A Current Limiting with Foldback
  • Internal Current Sense Resistor
  • Remote Sense for Improved Load Regulation
  • External Shutdown
  • Under-Voltage Lockout and Reverse Voltage Protection
  • Thermal Shutdown Protection
  • 8 Pin Mini-Dip Package (Surface Mount also Available)

The UC1835/6 families of linear controllers are optimized for the design of low cost, low dropout, linear regulators. Using an external pass element, dropout voltages of less than 0.5V are readily obtained. These devices contain a high gain error amplifier, a 250mA output driver, and a precision reference. In addition, current sense with fold-back provides for a 2.5A peak output current dropping to less than 0.5A at short circuit.

These devices are available in fixed, 5V, (UC1835), or adjustable, (UC1836), versions. In the fixed 5 volt version, the only external parts required are an external pass element, an output capacitor, and a compensation capacitor. On the adjustable version the output voltage can be set anywhere from 2.5V to 35V with two external resistors.

Additional features of these devices include under-voltage lockout for predictable start-up, thermal shutdown and short circuit current limiting to protect the driver device. On the fixed voltage version, a reverse voltage comparator minimizes reverse load current in the event of a negative input to output differential.

The UC1835/6 families of linear controllers are optimized for the design of low cost, low dropout, linear regulators. Using an external pass element, dropout voltages of less than 0.5V are readily obtained. These devices contain a high gain error amplifier, a 250mA output driver, and a precision reference. In addition, current sense with fold-back provides for a 2.5A peak output current dropping to less than 0.5A at short circuit.

These devices are available in fixed, 5V, (UC1835), or adjustable, (UC1836), versions. In the fixed 5 volt version, the only external parts required are an external pass element, an output capacitor, and a compensation capacitor. On the adjustable version the output voltage can be set anywhere from 2.5V to 35V with two external resistors.

Additional features of these devices include under-voltage lockout for predictable start-up, thermal shutdown and short circuit current limiting to protect the driver device. On the fixed voltage version, a reverse voltage comparator minimizes reverse load current in the event of a negative input to output differential.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기5
유형 직함 날짜
* Data sheet High Efficiency Regulator Controller datasheet 1999/09/05
* SMD UC1836 SMD 5962-90650 2016/06/21
Application note LDO Noise Demystified (Rev. B) PDF | HTML 2020/08/18
Application note LDO PSRR Measurement Simplified (Rev. A) PDF | HTML 2017/08/09
Application note DN-32 Optocoupler Feedback Drive Techniques 1999/09/05

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

시뮬레이션 모델

UCX836 TINA-TI Average Reference Design

SLUM218.TSC (74 KB) - TINA-TI Reference Design
시뮬레이션 모델

UCX836 TINA-TI Average Spice Model

SLUM217.ZIP (12 KB) - TINA-TI Spice Model
시뮬레이션 모델

UCX836 TINA-TI Transient Reference Design

SLUM215.TSC (71 KB) - TINA-TI Reference Design
시뮬레이션 모델

UCX836 TINA-TI Transient Spice Model

SLUM216.ZIP (12 KB) - TINA-TI Spice Model
시뮬레이션 모델

UCx836 Family PSpice Average Model

SLUM084.ZIP (124 KB) - PSpice Model
시뮬레이션 모델

UCx836 Family PSpice Transient Model

SLUM083.ZIP (57 KB) - PSpice Model
패키지 다운로드
CDIP (JG) 8 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상