전원 관리 AC/DC & DC/DC controllers (external FET)

UCC1895

활성

BiCMOS 고급 위상 변이 공진 컨트롤러

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
UCC28951 활성 넓은 입력 전압 범위를 위한 SR 제어 기능을 갖춘 그린 위상 전환 풀 브리지 컨트롤러 SR control, better light load efficiency, and programmable delays for ZVS

제품 상세 정보

Operating temperature range (°C) -55 to 125 Control mode Current, Feedforward, Voltage Topology Full bridge Rating Military Duty cycle (max) (%) 100
Operating temperature range (°C) -55 to 125 Control mode Current, Feedforward, Voltage Topology Full bridge Rating Military Duty cycle (max) (%) 100
CDIP (J) 20 167.464 mm² 24.2 x 6.92 LCCC (FK) 20 79.0321 mm² 8.89 x 8.89
  • Programmable-output turnon delay
  • Adaptive delay set
  • Bidirectional oscillator synchronization
  • Voltage-mode, peak current-mode, or average current-mode control
  • Programmable soft start, soft stop, and chip disable via a single pin
  • 0% to 100% duty-cycle control
  • 7-MHz error amplifier
  • Operation to 1 MHz
  • Typical 5-mA operating current at 500 kHz
  • Very low 150-µA current during UVLO
  • Programmable-output turnon delay
  • Adaptive delay set
  • Bidirectional oscillator synchronization
  • Voltage-mode, peak current-mode, or average current-mode control
  • Programmable soft start, soft stop, and chip disable via a single pin
  • 0% to 100% duty-cycle control
  • 7-MHz error amplifier
  • Operation to 1 MHz
  • Typical 5-mA operating current at 500 kHz
  • Very low 150-µA current during UVLO

The UCC3895 is a phase-shift PWM controller that implements control of a full-bridge power stage by phase shifting the switching of one half-bridge with respect to the other. The device allows constant frequency pulse-width modulation in conjunction with resonant zero-voltage switching to provide high efficiency at high frequencies. The part is used either as a voltage-mode or current-mode controller.

While the UCC3895 maintains the functionality of the UC3875/6/7/8 family and UC3879, it improves on that controller family with additional features such as enhanced control logic, adaptive delay set, and shutdown capability. Because the device is built using the BCDMOS process, it operates with dramatically less supply current than it’s bipolar counterparts. The UCC3895 operates with a maximum clock frequency of 1 MHz.

The UCC3895 is a phase-shift PWM controller that implements control of a full-bridge power stage by phase shifting the switching of one half-bridge with respect to the other. The device allows constant frequency pulse-width modulation in conjunction with resonant zero-voltage switching to provide high efficiency at high frequencies. The part is used either as a voltage-mode or current-mode controller.

While the UCC3895 maintains the functionality of the UC3875/6/7/8 family and UC3879, it improves on that controller family with additional features such as enhanced control logic, adaptive delay set, and shutdown capability. Because the device is built using the BCDMOS process, it operates with dramatically less supply current than it’s bipolar counterparts. The UCC3895 operates with a maximum clock frequency of 1 MHz.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기9
유형 직함 날짜
* Data sheet UCCx895 BiCMOS Advanced Phase-Shift PWM Controller datasheet (Rev. Q) PDF | HTML 2019/10/09
Application note UCC2895 Layout and Grounding Recommendations 2009/04/09
EVM User's guide UCC3895EVM-001 Configuring The UCC3895 For Direct Control Driven Synchronous Re (Rev. B) 2008/12/02
Application note Current Doubler Rectifier Offers Ripple Current Cancellation 2004/09/21
Application note Synchronous Rectifiers of a Current Doubler 2003/02/27
Application note UCC3895 CD Output Asymmetric Duty Cycle Operation 2002/08/21
Application note A Power Management Solution for Efficient, Multiple Output Applications 2001/10/04
Application note A Comparison Between the BiCMOS UCC3895 Phase Shift Controller and the UC3875 2001/02/22
Application note DN-63 The Current-Doubler Rectifier: An Alternative Rectification Technique 2001/01/12

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

UCC3895EVM-001 — UCC3895 평가 모듈

The UCC3895EVM-001 is an isolated 48V input phase shifted full bridge converter providing an output of 3.3V at 15A. Using the AB outputs of the UCC3895, a novel technique for direct control driven synchronous rectification is demonstrated.

사용 설명서: PDF
TI.com에서 구매할 수 없습니다
시뮬레이션 모델

UCC1895, UCC2895, UCC3895 TINA-TI Average Reference Design

SLUM188.TSC (99 KB) - TINA-TI Reference Design
시뮬레이션 모델

UCC1895, UCC2895, UCC3895 TINA-TI Average Spice Model

SLUM189.ZIP (11 KB) - TINA-TI Spice Model
시뮬레이션 모델

UCC1895, UCC2895, UCC3895 TINA-TI Transient Reference Design

SLUM186.TSC (934 KB) - TINA-TI Reference Design
시뮬레이션 모델

UCC1895, UCC2895, UCC3895 TINA-TI Transient Spice Model

SLUM187.ZIP (39 KB) - TINA-TI Spice Model
시뮬레이션 모델

UCCx895 Family PSpice Average Model

SLUM080.ZIP (105 KB) - PSpice Model
시뮬레이션 모델

UCCx895 and UCCx7324 Families PSpice Transient Model (Rev. A)

SLUM055A.ZIP (90 KB) - PSpice Model
패키지 다운로드
CDIP (J) 20 옵션 보기
LCCC (FK) 20 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상