UCC20225
- Single Input, Dual Output with Programmable Deadtime
- 5-mm x 5-mm Space-Saving LGA-13 Package
- Switching Parameters:
- 19-ns Typical Propagation Delay
- 5-ns Maximum Delay Matching
- 6-ns Maximum Pulse-Width Distortion
- CMTI Greater than 100-V/ns
- 4-A Peak Source, 6-A Peak Sink Output
- TTL and CMOS Compatible Inputs
- 3-V to 18-V Input VCCI Range
- Up to 25-V VDD with 8-V UVLO
- Programmable Dead Time
- Rejects Input Transients Shorter than 5-ns
- Fast Disable for Power Sequencing
- Safety-Related Certifications:
- 3535-VPK Isolation per DIN V VDE V 0884-11:2017-01
- 2500-VRMS Isolation for 1 Minute per UL 1577
- CQC Certification per GB4943.1-2011
The UCC20225 is an isolated single input, dual-output gate driver with 4-A source and 6-A sink peak current in a 5-mm x 5-mm LGA-13 package. It is designed to drive power transistors up to 5-MHz with best-in-class propagation delay and pulse-width distortion.
The input side is isolated from the two output drivers by a 2.5-kVRMS isolation barrier, with minimum 100-V/ns common-mode transient immunity (CMTI). Internal functional isolation between the two output-side drivers allows working voltage up to 700-VDC.
The UCC20225 allows programmable dead time (DT) through a resistor on DT pin. A disable pin shuts down both outputs simultaneously when it is set high, and allows normal operation when left open or grounded.
The device accepts VDD supply voltages up to 25-V. A wide input VCCI range from 3-V to 18-V makes the driver suitable for interfacing with both analog and digital controllers. All the supply voltage pins have under voltage lock-out (UVLO) protection.
With all these advanced features, the UCC20225 enables high power density, high efficiency, and robustness in a wide variety of power applications.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | UCC20225 2.5-kVRMS Isolated Dual-Channel Gate Driver with Single Input in LGA datasheet (Rev. A) | PDF | HTML | 2018/03/01 |
| Certificate | VDE Certificate for Basic Isolation for DIN EN IEC 60747-17 (Rev. Y) | 2025/08/20 | ||
| Application brief | The Use and Benefits of Ferrite Beads in Gate Drive Circuits | PDF | HTML | 2021/12/16 | |
| Certificate | FPPT2 - Nonoptical Isolating Devices UL 1577 Certificate of Compliance | 2021/10/26 | ||
| Application brief | External Gate Resistor Selection Guide (Rev. A) | 2020/02/28 | ||
| Application brief | Understanding Peak IOH and IOL Currents (Rev. A) | 2020/02/28 | ||
| Application brief | How to Drive High Voltage GaN FETs with UCC21220A | 2019/03/06 | ||
| Certificate | UL Certification E181974 Vol 4. Sec 8 (Rev. A) | 2018/07/23 | ||
| Certificate | CQC Product Certificate 2 | 2018/02/07 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
UCC21225AEVM-365 — UCC21225A 4A, 6A 5.7kVRMS 절연 듀얼 채널 게이트 드라이버 평가 모듈
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VLGA (NPL) | 13 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.