UCC2813-5
- 100-µA typical starting supply current
- 500-µA typical operating supply current
- Operation to 1 MHz
- Internal soft start
- Internal fault soft start
- Internal leading-edge blanking of the current-sense signal
- 1-A totem-pole output
- 70-ns typical response from current-sense to gate-drive output
- 1.5% Tolerance Voltage Reference
- Same Pinout as the UCC3802 device, UC3842 device, and UC3842A device families
The UCC3813-x device family of high-speed, low-power integrated circuits contains all of the control and drive components required for off-line and DC-to-DC fixed-frequency current-mode switching power supplies with minimal parts count.
These devices have the same pin configuration as the UC384x device family, and also offer the added features of internal full-cycle soft start and internal leading-edge blanking of the current-sense input.
The UCC3813-x device family offers a variety of package options, temperature-range options, choice of maximum duty cycle, and choice of critical voltage levels. Devices with lower reference voltage such as the UCC3813-3 and UCC3813-5 fit best into battery operated systems, while the higher reference and the higher UVLO hysteresis of the UCC3813-2 device and UCC3813-4 device make these ideal choices for use in off-line power supplies.
The UCC2813-x device series is specified for operation from –40°C to 85°C and the UCC3813-x device series is specified for operation from 0°C to 70°C.
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | UCCx813-x Low-Power Economy BiCMOS Current-Mode PWM datasheet (Rev. F) | PDF | HTML | 2020/05/12 |
| Application note | Conditioning a Switch-mode Power Supply Current Signal Using TI Op Amps (Rev. A) | PDF | HTML | 2021/06/11 | |
| Application note | Understanding Inverting Buck-Boost Power Stages in Switch Mode Power Supplies (Rev. B) | 2019/03/12 | ||
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 | ||
| Application note | UCC38C42 Family of High-Speed BiCMOS Current-Mode PWM Controllers | 2002/02/07 | ||
| Application note | Differences Between the UCC3813 and the UCC3800 PWM Families | 2000/06/02 | ||
| Application note | DN-42A Design Considerations for Transitioning from UC3842 to the New UCC3802 | 1999/09/05 | ||
| Application note | DN-62 Switching Power Supply Topology Voltage Mode vs. Current Mode | 1999/09/05 | ||
| Application note | U-111, Practical Considerations in Current Mode Power Supplies | 1999/09/05 | ||
| Application note | U-133A UCC3800/1/2/3/4/5 BiCMOS Current Mode Control IC's | 1999/09/05 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
UCCX805 & UCCX813-5 TINA-TI Startup Reference Design
UCCX805 & UCCX813-5 TINA-TI Steady State Reference Design
UCCX805 & UCCX813-5 TINA-TI Transient Spice Model
UCCx805, UCCx813-5 Families PSpice Transient Model (Rev. B)
PMP2187 — 의료용 팩을 위한 플라이백, 선형 레귤레이터(5.75V@10mA)
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| SOIC (D) | 8 | 옵션 보기 |
| TSSOP (PW) | 8 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치