AM5746
- Dual Arm® Cortex®-A15 microprocessor subsystem
- Up to two C66x floating-point VLIW DSP cores
- Fully object-code compatible with C67x and C64x+
- Up to thirty-two 16 × 16-bit fixed-point multiplies per cycle
- Up to 2.5MB of on-chip L3 RAM
- Two DDR3/DDR3L External Memory
Interface (EMIF) modules
- Supports rates up to DDR3-1333
- Up to 2GB supported per EMIF
- ECC supported on primary EMIF
- 2× Dual Arm® Cortex®-M4 coprocessors (IPU1 and IPU2)
- Up to two Embedded Vision Engines (EVEs)
- IVA-HD subsystem
- 4K @ 15fps encode and decode support for H.264 CODEC
- Other CODECs are up to 1080p60
- Display subsystem
- Full-HD video (1920 × 1080p, 60 fps)
- Multiple video inputs and video outputs
- 2D and 3D graphics
- Display controller with DMA engine and up to three pipelines
- HDMI™ encoder: HDMI 1.4a and DVI 1.0 compliant
- 2× dual-core Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS)
- 2D-graphics accelerator
(BB2D) subsystem
- Vivante® GC320 core
- Video Processing Engine (VPE)
- Dual-core PowerVR® SGX544 3D GPU
- Secure boot support
- Hardware-enforced root-of-trust
- Customer programmable keys and OTP data
- Support for takeover protection, IP protection, and anti-roll back protection
- Cryptographic acceleration
support
- Supports cryptographic cores
- AES – 128/192/256-bits key sizes
- 3DES – 56/112/168-bits key sizes
- MD5, SHA1
- SHA2 – 224/256/384/512
- True random number generator
- DMA support
- Supports cryptographic cores
- Debug
security
- Secure software controlled debug access
- Security aware debugging
- Trusted Execution Environment (TEE)
support
- Arm TrustZone® based TEE
- Extensive firewall support for isolation
- Secure DMA path and interconnect
- Secure watchdog/timer/IPC
- Two Video Input Port (VIP)
modules
- Support for up to eight multiplexed input ports
- General-Purpose Memory Controller (GPMC)
- Enhanced Direct Memory Access (EDMA) controller
- 2-port Gigabit Ethernet switch
- Sixteen 32-bit general-purpose timers
- 32-bit MPU watchdog timer
- Five Inter-Integrated Circuit (I2C™) ports
- HDQ/1-Wire® interface
- Ten configurable UART/IrDA/CIR modules
- Four Multichannel Serial Peripheral Interfaces (McSPI)
- Quad Serial Peripheral Interface (QSPI)
- SATA Gen2 interface
- Eight Multichannel Audio Serial Port (McASP) modules
- SuperSpeed USB 3.0 dual-role device
- High Speed USB 2.0 dual-role device
- Four Multimedia Card/Secure Digital/Secure Digital® Input Output Interfaces (MMC™/SD®/SDIO)
- PCI-Express® 3.0
(PCIe®) subsystems with two 5-Gbps
lanes
- One 2-lane Gen2-compliant port
- or two 1-lane Gen2-compliant ports
- Up to two Controller Area Network (DCAN)
modules
- CAN 2.0B protocol
- Modular Controller Area Network (MCAN)
module
- CAN 2.0B protocol with available FD
(flexible data rate) functionality
- CAN 2.0B protocol with available FD
- Up to 247 General-Purpose I/O (GPIO) pins
- Power, reset, and clock management
- On-chip debug with CTools technology
- 28-nm CMOS technology
- 23 mm × 23 mm, 0.8-mm pitch, 760-pin BGA (ABZ)
AM574x Sitara™ processors are Arm® applications processors built to meet the intense processing needs of modern embedded products.
AM574x devices bring high processing performance through the maximum flexibility of a fully integrated mixed processor solution. The devices also combine programmable video processing with a highly integrated peripheral set. Cryptographic acceleration is available in every AM574x device.
Programmability is provided by dual-core Arm® Cortex®-A15 RISC CPUs withNeon™ extension, and two TI C66x VLIW floating-point DSP cores, and two Embedded Vision Engines (EVEs). The Arm CPUs allow developers to keep control functions separate from other algorithms programmed on the DSPs and coprocessors, thus reducing the complexity of the system software.
Additionally, TI provides a complete set of development tools for the Arm® and C66x DSP, including C compilers, a DSP assembly optimizer to simplify programming and scheduling, and a debugging interface for visibility into source code execution.
Cryptographic acceleration is available in all devices. All other supported security features, including support for secure boot, debug security and support for trusted execution environment are available on High-Security (HS) devices. For more information about HS devices, contact your TI representative.
AM574x Sitara Arm applications processors are built to meet the intense processing needs of modern embedded products.
AM574x devices bring high processing performance through the maximum flexibility of a fully integrated mixed processor solution. The devices also combine programmable video processing with a highly integrated peripheral set. Cryptographic acceleration is available in every AM574x device.
Programmability is provided by dual-core Arm Cortex-A15 RISC CPUs with Arm® Neon™ extension, and two TI C66x VLIW floating-point DSP cores. The Arm allows developers to keep control functions separate from other algorithms programmed on the DSPs and coprocessors, thus reducing the complexity of the system software.
Additionally, TI provides a complete set of development tools for the Arm and C66x DSP, including C compilers, a DSP assembly optimizer to simplify programming and scheduling, and a debugging interface for visibility into source code execution.
Cryptographic acceleration is available in all devices. All other supported security features, including support for secure boot, debug security and support for trusted execution environment are available on High-Security (HS) devices. For more information about HS devices, contact your TI representative.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
ADVAN-3P-SITARA-SOMS — Advantech Sitara SOM 和 SBCS
BEAGLEBOARD-X15 — BeagleBoard-X15 開發電路板
COMPU-3P-SITARASOMS — Compulab Sitara SOM
CRLNK-3P-SOMS — 適用於 TI ARM 架構處理器的 Critical Link MitySOM 系統模組
Critical Link is a US-based embedded systems company offering System on Modules (SoMs) and scientific imaging platforms for electronic applications around the world. The MitySOM® and MityDSP® families incorporate DSP, FPGA, and ARM technologies, and are designed for long product lifespan and (...)
ELESAR-3P-SITARA-SOMS — Elesar Sitara SOM
FORLX-3P-SITARA-SOMS — Forlinx Sitara SOM
TQ-3P-SITARASOMS — 適用於 TI Arm 架構處理器和微控制器的 TQ Group 系統模組
TMDSEMU560V2STM-UE — XDS560v2 System Trace USB 與乙太網路偵錯探測器
The XDS560v2 is the highest performance of the XDS560™ family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7). Note that it does not support serial wire debug (SWD).
All XDS debug probes support Core and System Trace in all ARM and DSP processors (...)
PROCESSOR-SDK-LINUX-AM57X — Linux Processor SDK for AM57x
處理器 SDK (軟體開發套件) 是一套專為 TI 嵌入式處理器所設計的整合軟體平台,提供簡易設定,可迅速且立即執行基準測試與示範。所有 TI 代表產品的處理器 SDK 版本均相同,開發人員能順暢地在其他裝置上再次使用軟體,與移轉軟體至其他裝置。有了處理器 SDK 和 TI 嵌入式處理器解決方案,讓開發可調式平台解決方案從此變得更輕鬆簡單。
處理器 SDK v.02.xx 包括對 Linux 與 TI-RTOS 作業系統的支援。
Linux 主要特點:
- 長期穩定 (LTS) Linux 核心支援
- U-Boot 開機載入程式支援
- Linaro GNU 編譯器系列 (GCC) 工具鏈
- Yocto (...)
PROCESSOR-SDK-LINUX-RT-AM57X — Linux-RT Processor SDK for AM57x
處理器 SDK (軟體開發套件) 是一套專為 TI 嵌入式處理器所設計的整合軟體平台,提供簡易設定,可迅速且立即執行基準測試與示範。所有 TI 代表產品的處理器 SDK 版本均相同,開發人員能順暢地在其他裝置上再次使用軟體,與移轉軟體至其他裝置。有了處理器 SDK 和 TI 嵌入式處理器解決方案,讓開發可調式平台解決方案從此變得更輕鬆簡單。
處理器 SDK v.02.xx 包括對 Linux 與 TI-RTOS 作業系統的支援。
Linux 主要特點:
- 長期穩定 (LTS) Linux 核心支援
- U-Boot 開機載入程式支援
- Linaro GNU 編譯器系列 (GCC) 工具鏈
- Yocto (...)
PROCESSOR-SDK-RTOS-AM57X — RTOS Processor SDK for AM57x
處理器 SDK (軟體開發套件) 是一套專為 TI 嵌入式處理器所設計的整合軟體平台,提供簡易設定,可迅速且立即執行基準測試與示範。所有 TI 代表產品的處理器 SDK 版本均相同,開發人員能順暢地在其他裝置上再次使用軟體,與移轉軟體至其他裝置。有了處理器 SDK 和 TI 嵌入式處理器解決方案,讓開發可調式平台解決方案從此變得更輕鬆簡單。
處理器 SDK v.02.xx 包括對 Linux 與 TI-RTOS 作業系統的支援。
Linux 主要特點:
- 長期穩定 (LTS) Linux 核心支援
- U-Boot 開機載入程式支援
- Linaro GNU 編譯器系列 (GCC) 工具鏈
- Yocto (...)
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
AM57X-ACADEMY — AM57x academy
GHS-INTEGRITY-RTOS — Green Hills INTEGRITY RTOS
GHS-3P-UVELOSITY — Green Hills Software u-velOSity Safety RTOS
The µ-velOSity™ Safety RTOS is the smallest of Green Hills Software's real-time operating systems and was designed especially for microcontrollers. It supports a wide range of TI processor families using the Arm® Cortex-M or Cortex-R cores as a main CPU or as a co-processors (...)
MG-3P-NUCLEUS-RTOS — Mentor Graphics Nucleus RTOS
QNX-3P-NEUTRINO-RTOS — QNX Neutrino RTOS
FFTLIB — 適用於浮點裝置的 FFT 函式庫
The Texas Instruments FFT library is an optimized floating-point math function library for computing the discrete Fourier transform (DFT).
MATHLIB — 用於浮點裝置的 DSP 數學函式庫
PRU-ICSS-ETHERCAT-SLAVE — PRU-ICSS software for EtherCAT slave
PRU-ICSS 通訊協定為 TI Sitara 處理器實現即時工業通訊。 PRU-ICSS 通訊協定可在 Processor-SDK-RTOS、TI 的統合軟體開發平台上使用,並且包含最佳化 PRU-ICSS 韌體,這是適用於 ARM 處理器及範例應用的對應 PRU-ICSS 驅動程式。PRU-ICSS 韌體在 PRU 核心上運作,將時間關鍵的鏈路層處理從運作 TI-RTOS 的主 ARM 處理器中卸載。PRU-ICSS 驅動程式為 PRU-ICSS 資源提供了簡單的存取方式,並能輕鬆與在 ARM 核心上運作的通訊協定堆疊和應用程式軟體整合。 (...)
PRU-ICSS-ETHERNETIP-ADAPTER — PRU-ICSS software for EtherNetIP adapter
PRU-ICSS 通訊協定為 TI Sitara 處理器實現即時工業通訊。 PRU-ICSS 通訊協定可在 Processor-SDK-RTOS、TI 的統合軟體開發平台上使用,並且包含最佳化 PRU-ICSS 韌體,這是適用於 ARM 處理器及範例應用的對應 PRU-ICSS 驅動程式。PRU-ICSS 韌體在 PRU 核心上運作,將時間關鍵的鏈路層處理從運作 TI-RTOS 的主 ARM 處理器中卸載。PRU-ICSS 驅動程式為 PRU-ICSS 資源提供了簡單的存取方式,並能輕鬆與在 ARM 核心上運作的通訊協定堆疊和應用程式軟體整合。 (...)
PRU-ICSS-HSR-PRP-DAN — PRU-ICSS software for HSR/PRP
PRU-ICSS 通訊協定為 TI Sitara 處理器實現即時工業通訊。 PRU-ICSS 通訊協定可在 Processor-SDK-RTOS、TI 的統合軟體開發平台上使用,並且包含最佳化 PRU-ICSS 韌體,這是適用於 ARM 處理器及範例應用的對應 PRU-ICSS 驅動程式。PRU-ICSS 韌體在 PRU 核心上運作,將時間關鍵的鏈路層處理從運作 TI-RTOS 的主 ARM 處理器中卸載。PRU-ICSS 驅動程式為 PRU-ICSS 資源提供了簡單的存取方式,並能輕鬆與在 ARM 核心上運作的通訊協定堆疊和應用程式軟體整合。 (...)
PRU-ICSS-PROFIBUS-SLAVE — PRU-ICSS software for PROFIBUS slave
PRU-ICSS 通訊協定為 TI Sitara 處理器實現即時工業通訊。 PRU-ICSS 通訊協定可在 Processor-SDK-RTOS、TI 的統合軟體開發平台上使用,並且包含最佳化 PRU-ICSS 韌體,這是適用於 ARM 處理器及範例應用的對應 PRU-ICSS 驅動程式。PRU-ICSS 韌體在 PRU 核心上運作,將時間關鍵的鏈路層處理從運作 TI-RTOS 的主 ARM 處理器中卸載。PRU-ICSS 驅動程式為 PRU-ICSS 資源提供了簡單的存取方式,並能輕鬆與在 ARM 核心上運作的通訊協定堆疊和應用程式軟體整合。 (...)
PRU-ICSS-PROFINET-SLAVE — PRU-ICSS software for Profinet slave
PRU-ICSS 通訊協定為 TI Sitara 處理器實現即時工業通訊。 PRU-ICSS 通訊協定可在 Processor-SDK-RTOS、TI 的統合軟體開發平台上使用,並且包含最佳化 PRU-ICSS 韌體,這是適用於 ARM 處理器及範例應用的對應 PRU-ICSS 驅動程式。PRU-ICSS 韌體在 PRU 核心上運作,將時間關鍵的鏈路層處理從運作 TI-RTOS 的主 ARM 處理器中卸載。PRU-ICSS 驅動程式為 PRU-ICSS 資源提供了簡單的存取方式,並能輕鬆與在 ARM 核心上運作的通訊協定堆疊和應用程式軟體整合。 (...)
SPRC264 — TMS320C5000/6000 映像庫 (IMGLIB)
C5000 6000 影像處理庫 (IMGLIB) 是適合 C 程式設計工具的最佳化影像/影片處理函式庫。此函式庫包括 C 可呼叫通用影像/影片處理常式,這些常式通常用於運算密集型即時應用。相較於同等標準 ANSI C 語言程式碼,使用這些常式可以實現更高性能。IMGLIB 透過立即可用的 DSP 功能與原始程式碼,能夠大幅縮短應用程式開發時間。
查看基準測試:DSP 核心基準測試
SPRC265 — TMS320C6000 DSP 函式庫 (DSPLIB)
TMS320C6000 數位訊號處理器函式庫 (DSPLIB) 是適合 C 編程人員的平台最佳化 DSP 函式庫。此函式庫包括可呼叫 C 語言的通用訊號處理常式,通常用於運算密集的即時應用。相較於同等標準 ANSI C 語言程式碼,使用這些常式可以實現更高性能。DSPLIB 透過立即可用的 DSP 功能與原始程式碼,能夠大幅縮短應用程式開發時間。
查看基準測試:DSP 核心基準測試
WIT-3P-SITARABSP — Witekio Sitara Android 和 Windows 作業系統
C66XCODECS — 轉碼器 - 視訊、語音 - 適用於 C66x 架構產品
TI codecs are free, come with production licensing and are available for download now. All are production-tested for easy integration into video and voice applications. In many cases, the C64x+ codecs are provided and validated for C66x platforms. Datasheets and Release Notes are on the download (...)
ITTIAM-3P-CODECS — Ittiam 轉碼器
Ittiam provides high quality, high performance multimedia centric products and solutions. Ittiam brings extensive media expertise and more than a decade's experience on Texas Instruments processors. Leverage Ittiam’s rich portfolio of proven, high-performance audio codecs to build an array of (...)
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分,是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄,以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面,並可在桌面上或雲端中執行。
UniFlash 可從 CCStudio™ 開發人員區上的雲端執行,或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。
請注意,mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。
CLOCKTREETOOL — 適用於 Sitara、車用、視覺分析和數位訊號處理器的時脈樹工具
The Clock Tree Tool (CTT) for Sitara™ ARM®, Automotive, and Digital Signal Processors is an interactive clock tree configuration software that provides information about the clocks and modules in these TI devices. It allows the user to:
- Visualize the device clock tree
- Interact with clock tree (...)
POWEREST — 功率估計工具 (PET)
功耗估算工具 (PET) 讓使用者能深入瞭解特定 TI 處理器的功耗情況。本工具允許使用者選擇多種應用場景,不僅能掌握功耗數據,更能理解如何運用進階節能技術進一步降低整體功耗。
AM57x 與 AM437x 處理器專用 PET:
此可下載試算表提供使用者輸入應用所需裝置參數的機制。參數包含 IP 模組活動狀態/負載量、目標電源模式及電源管理使用情境。可設定多重運作條件並為每種狀態配置時間區段。電源估算數據已內嵌於試算表中,所有結果將直接在試算表內自動生成(無需上傳任何資料)。
AM57x 專用 PET:
(...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| FCCSP (ABZ) | 760 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。